• 터널과지하공간
• /
• 제16권5호
• /
• pp.413-421
• /
• 2006

발파에 의한 암반의 동적 파괴 과정을 설명하기 위해서는 발생한 폭굉압과 가스압의 작용을 동시에 연구해야 한다. 발파 과정에서 폭굉압과 가스압의 발파공 벽면에의 작용을 동시에 모델화하여 이에 따른 암반과의 상호 작용을 수치해석하는 연구에 앞서, 본 연구에서는 단일 발파공에서 생성된 단일 균열망에서의 가스 유동에 미치는 가스압 이력, 균열 길이 그리고 가스압을 산정하기 위해 적용한 상태 방정식의 영향에 대해 분석 하였다. 이를 위하여 단일공 발파에 의해 길이 0.01 m, 간극 0.001 m으로 동일한 5개의 균열로 구성된 단일 균열망이 생성되었다고 가정하였다. 또한 지름이 45 mm인 발파공에 지름이 36 mm인 PEIN을 장약하였다고 가정하여 수치해석을 수행하였다. 그 결과, 균열망을 구성하는 개별 균열에 작용하는 최대 가스압력과 그 도달시간은 사용 폭약의 특성과 균열망의 기하학적 특성에 의해 결정되는 것으로 나타났다.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.423-430
• /
• 2015

PURPOSE. To evaluate the cumulative survival rate (CSR) and mechanical complications of single-tooth $Ankylos^{(R)}$ implants. MATERIALS AND METHODS. This was a retrospective clinical study that analyzed 450 single $Ankylos^{(R)}$ implants installed in 275 patients between December 2005 and December 2012. The main outcomes were survival results CSR and implant failure) and mechanical complications (screw loosening, fracture, and cumulative fracture rate [CFR]). The main outcomes were analyzed according to age, sex, implant length or diameter, bone graft, arch, and position. RESULTS. The 8-year CSR was 96.9%. Thirteen (2.9%) implants failed because of early osseointegration failure in 3, marginal bone loss in 6, and abutment fracture in 4. Screw loosening occurred in 10 implants (2.2%), and 10 abutment fractures occurred. All abutment fractures were located in the neck, and concurrent screw fractures were observed. The CSR and rate of screw loosening did not differ significantly according to factors. The CFR was higher in middle-aged patients (5.3% vs 0.0% in younger and older patients); for teeth in a molar position (5.8% vs 0.0% for premolar or 1.1% for anterior position); and for larger-diameter implants (4.5% for 4.5 mm and 6.7% for 5.5 mm diameter vs 0.5% for 3.5 mm diameter) (all P<.05). CONCLUSION. The $Ankylos^{(R)}$ implant is suitable for single-tooth restoration in Koreans. However, relatively frequent abutment fractures (2.2%) were observed and some fractures resulted in implant failures. Middle-aged patients, the molar position, and a large implant diameter were associated with a high incidence of abutment fracture.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.311-322
• /
• 1998

American Society for Testing and Materials (ASTM) standard test method PS 070-97 has been created for measuring fracture toughness of advanced ceramics. PS 070-97 includes three test methods which use beams in bending: chevron notch (CNB), single-edged precracked beam (SEPB), and surface crack in flexure (SCF). Supporting data has been collected through several Versailles Advanced Materials and Standards round robins. This paper discusses the evolution of the standard including the rationale for the choice of the three methods and the specifications in the standard. Progress on Standard Reference material 2100 which will have certified values of fracture toughness is presented.

• 터널과지하공간
• /
• 제30권6호
• /
• pp.573-590
• /
• 2020

본 논문에서는 국제공동연구인 DECOVALEX-2023 프로젝트 Task G의 연구 현황과 현재까지 수행된 benchmark 해석 결과를 소개하였다. Task G의 명칭은 'Safety ImplicAtions of Fluid Flow, Shear, Thermal and Reaction Processes within Crystalline Rock Fracture NETworks(SAFENET)'로, 결정질 암반 내 균열의 생성과 성장 메커니즘 및 균열에서 발생하는 열-수리-역학적 복합거동을 해석하기 위한 수치해석기법을 개발하는 데에 목표가 있다. Task G의 첫 번째 연구 테마는 결정질 암석 내 단일 균열의 역학적 거동에 대한 해석해(analytical solution)를 바탕으로 각 연구팀의 수치모델링기법을 개발 및 검증하는 Benchmark 해석이다. 본 연구에서는 3차원 입자기반 개별요소모델을 이용하여 단일 균열을 포함한 암석의 역학적 거동 특성을 모델링하고자 하였다. 이 모델에서는 상호독립적으로 거동하는 개별입자의 집합체를 통해 암석의 구조적 특징을 모사하고, 입자와 입자간 접촉에서 발생하는 역학적 거동을 개별요소해석모델인 3DEC을 통해 계산하게 된다. 해석 결과, 도메인의 경계응력으로 인해 균열에 유도되는 수직응력과 전단응력 수준은 변위 구속과 응력 재배치로 인해 이론적인 수치보다 낮게 나타났다. 그러나 수치모델에서 계산된 수직변위와 전단변위는 실제 균열의 유도 응력을 통해 추정된 해석해와 비교할 때 상당히 유사한 결과를 보였으며 균열의 응력-변위 관계를 합리적으로 재현할 수 있음을 확인하였다. 본 연구의 해석모델은 Task G에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 다양한 조건의 실내시험에 적용하여 타당성을 검증할 예정이다.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.525-539
• /
• 2014

Bonded composite-patch repair has been widely used to restore or extend the service life of damaged structures due to its effectiveness as a mechanical repair technique. In this paper using extended finite element method (XFEM), three-dimensional crack models are developed to examine the fracture behavior of centrally cracked aluminum plates repaired with single and double sided composite patches. Stress intensity factor (SIF) at the crack tip is used as the fracture criterion. In this regard, the effects of the crack lengths, patch materials, orientation of plies, adhesive and patch thickness are examined to estimate the SIF of the repaired plate and the repair performance. The obtained results show that composite patches have significant effect on reduction of the SIF at the crack tip. It is also proved that using double symmetric repair, in comparison to single one, reduces considerably SIF at the crack tip. Hence, the residual strength can be improved significantly as well as fatigue life of the structure. Investigation of ply orientation effects shows SIF increase as the ply orientation is changed from $0^{\circ}$ (perpendicular to the advancing crack) to $90^{\circ}$ (parallel to the crack line). However, the effectiveness of the ply orientation depends on the loading direction and the crack direction.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.101-109
• /
• 2008

수분에 기인한 화강풍화토의 압축성 변화정도를 명확히 밝히기 위하여 풍화도가 서로 다른 3종류의 화강풍화토와 실리카를 이용해, 기건상태와 습윤상태에서 단입자파쇄시험과 일차원압축시험을 실시했다. 실험결과, 입자가 침수됨에 따라 입자표면의 강도를 나타내는 제1파쇄강도가 현저히 저하되고, 일차원적인 압축성이 증가되는 것이 확인되었다. 이와 같은 결과는 입자가 침수됨에 따라 입자강도가 저하되어 입자파쇄가 증가하는 것에 기인하는 것으로 평가되었다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.64-72
• /
• 1998

This paper was undertaken to develop the fracture toughness testing method using small and single specimen compared to the conventional method in evaluating elastic-plastic fracture toughness of the superconducting magnet structural material at cryogenic temperature. The elastic-plastic fracture toughness test was conducted by using the unloading compliance method recommended by ASTM E813-89 to accomplish the above purpose. And, the 20% side-grooved 0.5TCT and 1TCT specimens were used to evaluate the fracture toughness by using as possible as miniaturized CT specimen. The unloading compliance method was a very useful method in evaluating elastic-plastic fracture toughness at cryogenic temperature. It could be taken valid fracture toughness values by using 20% side-grooved 0.5TCT specimen recommended by ASTM E813-89.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제44권6호
• /
• pp.269-274
• /
• 2018

Objectives: The incidence and patterns of mandibular fractures vary by country and population age. This retrospective study evaluated the etiologies and patterns of mandibular fractures in children. Materials and Methods: The clinical records of 89 children (45 males and 44 females) aged 0 to 12 years who presented with mandibular fractures from July 2012 to June 2016 were retrospectively reviewed. The sex, patient age, site of fracture, etiology of trauma, and monthly variations of the fractures were recorded. Descriptive statistics, the z-test and chi-square test were used for statistical analysis and the P-value was set at <0.05. Results: Eighty-nine children (male-to-female ratio 1.02:1) sustained 131 mandibular fractures. Within the study sample, the 6 to 9 year age group most frequently experienced fractures (47.3%). Falls and road traffic accidents (RTA) were the two most common etiological factors that accounted for 44.9% and 24.7% of cases. The condylar fracture was the most common anatomical location (38.9%) followed by the angle (20.6%), parasymphysis (18.3%), body (15.3%), and symphysis (5.3%). A single fracture (51.7%) was more common than multiple fractures (48.3%). The month-wise distribution of mandibular fractures was fairly constant. Conclusion: The condylar region was the most common anatomic site for fractures; in addition, a fall and RTA were the major etiological factors for mandibular fractures. A single fracture was observed in 51.7% of patients while multiple fracture lines accounted for 48.3% of cases.

• Journal of Trauma and Injury
• /
• 제37권1호
• /
• pp.6-12
• /
• 2024

Purpose: Open pelvic bone fractures are relatively rare and are considered more severe than closed fractures. This study aimed to compare the clinical outcomes of open and closed severe pelvic bone fractures. Methods: Patients with severe pelvic bone fractures (pelvic Abbreviated Injury Scale score, ≥4) admitted at a single level I trauma center between 2016 and 2020 were retrospectively analyzed. Patients aged <16 years and those with incomplete medical records were excluded from the study. The patients were divided into open and closed fracture groups, and their demographics, treatment, and clinical outcomes were compared before and after 1:2 propensity score matching. Results: Of the 321 patients, 24 were in the open fracture group and 297 were in the closed fracture group. The open fracture group had more infections (37.5% vs. 5.7%, P<0.001) and longer stays in the intensive care unit (median 11 days, interquartile range [IQR] 6-30 days vs. median 5 days, IQR 2-13 days; P=0.005), but mortality did not show a statistically significant difference (20.8% vs. 15.5%, P=0.559) before matching. After 1:2 propensity score matching, the infection rate was significantly higher in the open fracture group (37.5% vs. 6.3%, P=0.002), whereas the length of intensive care unit stay (median 11 days, IQR 6-30 days vs. median 8 days, IQR 4-19 days; P=0.312) and mortality (20.8% vs. 27.1%, P=0.564) were not significantly different. Conclusions: The open pelvic fracture group had more infections than the closed pelvic fracture group, but mortality was not significantly different. Aggressive treatment of pelvic bone fractures is important regardless of the fracture type, and efforts to reduce infection are important in open pelvic bone fractures.

• 한국해양공학회지
• /
• 제14권1호
• /
• pp.44-51
• /
• 2000

Safety and integrity are required for reactor pressure vessels because they are operated in high temperature. There are single specimen method multiple specimen method and load ratio analysis method which used as evaluation of safety and integrity for reactor pressure vessels. In this study the fracture resistance curve(J-R curve) elastic-plastic fracture toughness($J_{IC}$) and material tearing modulus ($T_{mat}$) of SA 508 class 3 alloy steel used as reactor pressure vessel steel are measured and evaluated at room temperature 20$0^{\circ}C$ and 30$0^{\circ}C$ according to unloading compliance method and load ration analysis method. And then the comparison with experimental $J_{IC}$ and theoretical$J_{IC}$ by local fracture strain is managed.