• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2002년도 하계학술대회 및 세미나
• /
• pp.21-23
• /
• 2002

In millimeter wave applications, it is often necessary to use transitions between waveguide and planar circuits. Finline structures can be used effectively to this purpose. In multilayered case, it is necessary to analyze the structure with numerical method such as spectral domain immittance method. The design procedure uses tile cutoff frequency for each taper width. The dispersion data in a single layer are compared with those in literature. The performance of the designed finline taper is verified with the FEM simulation using HFSS.

• 한국자기공명학회논문지
• /
• 제7권2호
• /
• pp.89-97
• /
• 2003

Foot-and-mouth disease virus (FMDV) belongs to the aphthovirus genus within the picornavirus which has a single copy of a positive sense RNA. The translation initiation process of FMDV occurs by a cap-independent mechanism directed by a highly structured element (∼435 nt) termed an internal ribosome entry site (IRES). We have designed and prepared FMDV 4-2 RNA (28nt) by in vitro transcription. The 2D NMR data revealed that FMDV 4-2 IRES domain RNA has a flexible loop and bulge conformation. In further study, we need to make an isotope labeled RNA sample and conduct 3D NMR experiments to completely determine the 3D structure. This study may establish a new drug design strategy to treat foot-and mouth disease.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.193-201
• /
• 1998

In this paper, the standard Dole, Glover, Khargoneker, and Francis (abbr. : DGKF 1989) H\ulcorner controller (H\ulcornerC) is extended to the nonlinear feedback linearization-H\ulcorner/sliding mode controller (NFL-H\ulcorner/SMC), to tackle the problem of the unmeasurable state variables as in the conventional SMC, to obtain smooth control as the linearized controller in a linear system, and to improve the time-domain performance under a worst scenario. The proposed controller is obtained by combining the H\ulcorner estimator with the nonlinear feedback linearization-sliding mode controller (NFL-SMC) and it does not need to measure all the state variables as in the traditional SMC. The proposed controller is applied as a nonlinear power system stabilizer (PSS) for the improvement of the power system damping characteristics of an single machine infinite bus system (SMIBS) connected through a double circuit line. The effectiveness of the proposed controller is verified by nonlinear time-domain simulation in case of a 3-cycle line-to-ground fault and in case of the parameter variations for the AVR gain K\ulcorner and for the inertia moment M.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.35-45
• /
• 1988

In this paper an experimental review of condition monitoring method using time domain vibration signals and statically measured wave forms of a multi-components damaged ball bearing is presented first time. Many investigators studied already about vibration characteristics of a single point damaged ball bearing but they did not make efforts to verify vibration phenomena of a multi-components damaged one. Even in case of a tripple components damaged (i.e, outer race, inner race and rolling element) one, the high frequency resonance technique (HERT) and the displacement time domain technique can be also used for its fault detection. According to experimental results undertaken a static displacement measuring method, the defect locations of components can be proposed confidently with simple calculation of the rotating angles of each component.

• 전자공학회논문지B
• /
• 제32B권7호
• /
• pp.1025-1035
• /
• 1995

In this paper, we realize a real time digital FM synthesizer based on genetic algorithm using a general purpose digital signal processor. Especially, we synthesize diverse music sounds nicely using a synthesis model consisting of a single modulator and multiple carriers. Also we present genetic algorithm-based technique which determines optimal parameters for reconstruction through FM synthesis of a sound after analyzing the spectrum of PCM data as a standard music sound using FFT. Using the suggested parameter extractiuon algorithm, we extract parameters of several instruments and then synthesize digital FM sounds. To verify the validity of the parameter extraction algorithm as well as realization of a real time digital music synthesizer, the evaluation is first done by listening the sound directly as subjective test. Secondly, to evaluate the synthesized sound objectively with an engineering sense, we compare the synthesized sound with an original one in a time domain and a frequency domain.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.106-113
• /
• 2002

In this study, a numerical analysis method for soil-pile interaction in frequency domain problem is presented. The total soil-pile interaction system is divided into two parts so called near field and far field. In the near field, beam elements are used for a pile and plain strain finite elements for soil. In the far field, dynamic fundamental solution for multi-layered half planes based on boundary element formulation is adopted for soil. These two fields are coupled using FE-BE coupling technique In order to verify the proposed soil-pile interaction analysis, the dynamic responses of pile on multi-layered half planes are simulated and the results are compared with the experimental results. Also, the dynamic response analyses of interface spring elements are performed. As a result, less spring stiffness makes the natural frequency decrease and the resonant amplitude increase.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.104-109
• /
• 2000

The modes of oscillation and radiated acoustic fields of compressible flows over open cavities are investigated computationally. The compressible Navier-Stokes equations are solved for two-dimensional cavities with laminar boundary layers upstream. The high-order and high-resolution numerical schemes are used for the evaluation of spatial derivatives and the time integration. Physically correct numerical boundary conditions are implemented to produce time-accurate solutions in the whole computation domain. The computational domain is large enough to directly resolve a portion of the radiated acoutic field. The results show a transition from a shear layer mode, for shorter cavities and lower Mach numbers, to a wake mode for longer cavities and higher Mach numbers. The shear layer mode is well characterized by Rossiter modes and these oscillations lead to intense upstream acoustic radiation dominated by a single frequency. The wake mode is characterized instead by a large-scale vortex shedding. Acoustic radiation is more intense, with multiple frequencies present.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.675-676
• /
• 2013

본 논문에서는 TDBM과 CMTEDD를 사용하여 다중출력조합디지털논리시스템 설계방법의 한가지를 제안하였다. 또한, CBDD와 CMTEDD를 기반으로 최종 조합디지털논리시스템 구성을 멀티플렉서를 사용하여 구현하였다. 제안한 방법은 기존의 방법에 비해 모듈사이의 내부결선을 효과적으로 줄일 수 있으며 입력변수의 쌍과 출력함수의 쌍에 의해 게이트 수를 줄일 수 있는 장점이 있다.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.136-145
• /
• 1997

To analyzed ride quality and to predict durability in vehicle dynamics, it is essential to describe a road surface profile precisely. This paper presents a technique to generate road surface profiles in a spatial domain by using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis, The derived road surfaces are compared to ISO(International Organization for Standardization) standards and classifications, proposed by the MIRA(Motor Industry Research Association). The methodology in this paper is also proposed to generate road roughness description with a limited external data. A small amount of external curve data is combined with an internal PSD function to generate road surface roughness in a spatial domain.

• 디지털콘텐츠학회 논문지
• /
• 제10권3호
• /
• pp.389-393
• /
• 2009

본 논문에서는 유한차분 시간영역법(Finite Difference Time Domain method)을 이용하여 단일 패치를 갖는 마이크로스트립 안테나와 2개의 패치를 갖는 광대역 갭 결합 마이크로스트립 패치안테나를 설계 및 해석하였다. 반사파를 최소로 하기 위해 Mur의 2차 흡수경계조건을 적용하였다. 이 안테나의 구동패치의 길이와 폭, 기생패치의 길이와 폭, 구동패치와 기생패치의 간격 등에 의한 반사손실, 전압정재파비, 입력 임피던스 등의 주파수 응답 특성을 해석하여 최적의 광대역 안테나의 설계치를 보여 주었고 이로부터 복사패턴을 제시하였다. 또한 광대역 안테나 특성이 일어나는 원인을 분석하였다.