• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.395-399
• /
• 2002

The voltammetric behavior of spontaneously adsorbing Mo layers on Pt(111) and Pt(100) electrodes has been studied to estimate the number of electrons involved in the electrochemical processes of spontaneously adsorbed Mo and the number of the bloc ked Pt sites for hydrogen adsorption. On Pt(111) and Pt(100) surfaces, the spontaneously adsorbed Mo layers showed redox peaks at 0.10 V and 0.15 V, respectively, and continuous current-potential waves in the conventional hydrogen region. Since the potential range of the Mo redox processes on both surfaces overlapped partially with the potential range of hydrogen adsorption, the variation in the ratio of the total charge of Mo and H ($Q_H$ +$Q_{MO}$) to the hydrogen charge of clean Pt electrode ($Q_H^0$) was analyzed. From the analysis, six electrons were estimated to be involved in the electrochemical processes of the spontaneously adsorbed Mo, and four Pt sites for hydrogen adsorption were calculated to be blocked by one adsorbed Mo atom. Based on these figures and the pH dependence of the Mo redox processes, we have proposed an electrochemical equation for the spontaneously adsorbed Mo. This electrochemical equation led us to conclude that the saturation coverage of the spontaneously adsorbed Mo is 0.25. The coverage of Mo less than 0.25, however, could not be determined voltammetrically due to the convolution of the charges of Mo and H.

• 전기화학회지
• /
• 제4권1호
• /
• pp.14-20
• /
• 2001

단결정 Pt(100)/0.5M $H_2SO_4$ 및 0.5M LiOH수용액 계면에서 저전위 수소흡착(UPD H)과 과전위 수소흡착(OPD H)에 관한 Langmuir흡착등온식을 위상이동 방법을 이용하여 연구 조사하였다. 최적 중간주파수에서 위상이동 변화$({-\varphi}\;vs.\;E)$는 Langmuir흡착등온식$(\theta\;vs.\;E)$의 추정에 적용할 수 있는 유용한 실험 방법이다. 단결정 Pt(100)/0.5M $H_2SO_4$ 수용액 계면에서 과전위 수소흡착에 기인한 흡착평형상수(K)와 흡착표준자유에너지$({\Delta}G_{ads})$는 각각 $1.5\times10^{-4}$와 21.8kJ/mol이다. 단결정 Pt(100)/0.5M LiOH 수용액 계면에서 K는 음전위에 따라 1.9(UPD H)에서 $6.8\times10^{-6}$ (OPD H)또는 그 반대로 전이한다. 마찬가지로, ${\Delta}G_{ads}$는 음전위에 따라 -1.6kJ/mol (UPD H)에서 29.5kJ/mol (OPD H) 또는 그 반대로 전이한다. 전극속도론적 패러미터$(K,\; {\Delta}G_{ads})$의 전이는 단결정 Pt(100)전극표면의 UPD H와 OPD H에 기인한다. UPD H와 OPD H는 음극 $H_2$발생 반응을 위한 순차적 과정이 아니라 전극표면의 수소 흡착부위에 기인하는 독립적 과정이다.

• 한국세라믹학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 1989

The phenomena that the electrical conductivity of rutile single crystal changes with time were investigated along the a and c crystallographic axes, at 85$0^{\circ}C$ and Po2 in the range of 1~10-18.5atm. The D.C. conductivity decreased with and saturated some value after ca. 100 hours. But the A.C. conductivity showed no time dependence in the whole Po2 range. These experimental results suggest that the time dependence of D.C. conductivity of rutile single crystal is due to space charge polarization effect; the electrode was Pt which is complete electronic conductor, while the sample was TiO2 which is mixed conductor.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.362-368
• /
• 2023

Multilayered actuators using Pb(Mg_1/3Nb_2/3)O₃-Pb(In_1/2Nb_1/2)O₃-PbTiO₃ (PMN-PIN-PT) crystals have demonstrated excellent properties, but are costly and lack mechanical strength. Textured PMN-PIN-PT ceramics exhibit robust mechanical strength and comparable properties to their single crystals form. However, the development of multilayered actuators using textured PMN-PIN-PT ceramics has not been achieved until now. This study presents the development of a multilayered actuator using textured 0.37PMN-0.29PIN-0.34PT ceramics with an Ag_0.9/Pd_0.1 inner electrode, co-fired at 950℃. A random 0.37PMN-0.29PIN-0.34PT ceramics multilayered actuator was also developed for comparison. The multilayered actuator consisted of 9 ceramic layers (36 ㎛ thickness) with an overall actuator thickness of 0.401 mm. The textured and random 0.37PMN-0.29PIN-0.34PT ceramics-based multilayered actuators achieved displacements of 0.61 ㎛ (0.15% strain) and 0.23 ㎛ (0.057% strain) at a low applied peak voltage of 100 V. These results suggest that the developed multilayered actuator using high-performance textured 0.37PMN-0.29PIN-0.34PT ceramics has the potential to replace expensive single crystal-based actuators cost-effectively.