• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.889-890
• /
• 2009

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.382-388
• /
• 2002

Dissolved silica is one of fatal components at a boiler facility Therefore, a dissolved silica measurement system should be equipped for managing efficiently the boiler facility. Most of silica measurement systems are composed of a sensor module of single-beam type structure, and silica density is measured with a infrared spectrometry using the Lambert-beer method. However, such a system occurs measuring error of large range and inconsistency of a light source, because of measuring a standard sample and a measuring sample alternatively. This paper introduces a method that the sensor module has a split-beam type structure and a tungsten lamp. The proposed system can measure silica density quickly and precisely more than those composing of a single-beam type structure, because of measuring and comparing with two samples at a same time. And examination results are shown to compare efficiencies of the system and existing commercial products, and for an ammonia influence.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.18-22
• /
• 2006

Although many efforts have been made in making nanometer-sized holes, there is still a major challenge in fabricating individual single-digit nanometer holes in a more controllable way for different materials, size distribution and hole shapes. In this paper we describe our efforts to use a top down approach in nanofabrication method to make single-digit nanoholes. There are three major steps towards the fabrication of a single-digit nanohole. 1) Preparing the freestanding thin film by epitaxial deposition and electrochemical etching. 2) Making sub-micro holes ($0.2{\mu}\;to\;0.02{\mu}$) by focused ion beam (FIB), electron beam (EB), atomic force microscope (AFM), and others methods. 3) Reducing the hole size to less than 10 nm by epitaxial deposition, FIB or EB induced deposition and micro coating. Preliminary work has been done on thin films (30 nm in thickness) preparation, sub-micron hole fabrication, and E-beam induced deposition. The results are very promising.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.2058-2066
• /
• 1999

The present paper proposes a new dynamic analysis method for multi-span Timoshenko beam structures supported by joints with damping subject to moving loads. An exact dynamic element matrix method is adopted to model Timoshenko beam structures. A generalized modal analysis method is applied to derive response formulae for beam structures subject to moving loads. The proposed method offers an exact and closed form solution. Two numerical examples are provided for validating and illustrating the proposed method. In the first numerical example, a single span beam with multiple moving loads is considered. A dynamic analysis on a multi-span beam under a moving load is considered as the second example, in which the flexibility and damping of supporting joints are taken into account. The numerical study proves that the proposed method is useful for the vibration analysis of multi-span beam-hype structures by moving loads.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.489-495
• /
• 2003

예인형 선 배열 소나는 구조적인 특성상 배열 축을 중심으로 대칭적인 빔을 형성하기 때문에 탐지된 표적에 대하여 좌/우 방위 구분에 있어 모호성을 드러낸다. 이러한 예인형 선 배열의 좌/우 구분이 모호한 문제점을 해결하기 위하여 고정형 카디오이드 빔을 적용한 방법이 사용되었다. 하지만 고정형 카디오이드 빔을 사용할 경우 약 11°이내의 영역에서 카디오이드 빔의 후면 이득에 대한 영향을 줄일 수가 없기 때문에 좌/우 분리 성능이 저하된다. 이 문제를 해결하기 위해서 본 논문에서는 적응형 카디오이드 빔을 사용하여 후면 빔의 이득을 줄임으로써 예인형 선 배열의 성능을 향상시켰다.

• Structural Engineering and Mechanics
• /
• 제72권6호
• /
• pp.797-807
• /
• 2019

In this study, an exact transfer matrix expression for a twisted uniform beam considering the effect of shear deformation and rotary inertia is developed. The particular transfer matrix is derived by applying the distributed mass and transcendental function while using a local coordinate system. The results obtained from this method are independent for a number of subdivided elements, and this method can determine the required number of exact solutions for the free vibration characteristics of a twisted uniform Timoshenko beam using a single element. In addition, it can be used as a useful numerical method for the computation of high-order natural frequencies. To validate the accuracy of the proposed method, the computed results are compared with those reported in the existing literature, and the comparison results indicate notably good agreement. In addition, the method is used to investigate the effects of shear deformation and rotary inertia for a twisted beam.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권4호
• /
• pp.10-15
• /
• 2007

Taguchi methods have been used for a long time to improve the product quality and process performance of a manufacturing system, Few researchers have applied this methodology in laser beam cutting (LBC) of sheet metals and found the considerable improvement in cut qualities. In all experimental investigations of LBC so far, the objective was to optimize the single quality characteristic at a time. In this paper the simultaneous optimization of multiple quality characteristics such as Kerf width and material removal rate (MRR) during pulsed Nd:YAG LBC of thin sheet of magnetic material (high Silicon-steel) has been presented using Taguchi's quality loss function. The results show the considerable improvement in multiple S/N ratio as compared to initial cutting condition. Also, the comparison of results from single and multi-objective optimization have been presented and it was found that the loss in quality is always possible shifting from single quality to multiple quality optimization.

• 한국통신학회논문지
• /
• 제31권7C호
• /
• pp.743-754
• /
• 2006

본 논문에서는 두 개의 다른 밀리미터 파장을 적용하는 광전계통의 구조 변경을 시도하고 신호 흡수나 환경적 간섭 왜곡에 취약한 싱글 빔(single beam) 레이저 방식의 단점을 보완한 듀얼 빔(dual beam) 방식의 레이저 레이더 시스템을 제안한다. 본 논문에서 제한 한 듀얼 빔 방식 레이더 시스템은 적은 신호 검파의 신뢰성 측면에서 통계적이며 분석적인 방법으로 제안하여 시스템의 우수성을 입증하고 AWGN 배경 잡음과 흡수 또는 간섭에 의해 레이저 신호의 왜곡이 발생하는 채널환경에서 시뮬레이션을 수행함으로써 신호 검파의 신뢰성 향상이 가능하다는 분석적 결과에 대한 정량적 재검증을 한다.

• 대한산업공학회지
• /
• 제19권3호
• /
• pp.11-23
• /
• 1993

A basic problem of sequencing a set of independent tasks at a single facility with the objective of minimizing total tardiness is considered. A variation of beam search, called knowledge-based beam search, has been studied which uses domain knowledge to reduce the problem size with an evaluation function to generate nodes probable to include the optimal solution. Its performance behavior is compared with some existing algorithms.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.347-354
• /
• 2012

Using a single-line pulsed laser beam is well known as a useful noncontact method to generate a directional surface acoustic wave. In this method, different laser beam energy profiles produce different waveforms and frequency characteristics. In this paper, we considered two typical kinds of laser beam energy profiles, Gaussian and square-like, to find out a difference in the frequency characteristics. To achieve this, mathematical models were proposed first for Gaussian laser beam profile and square-like respectively, both of which depended on the laser beam width. To verify the theoretical models, experimental setups with a cylindrical lens and a line-slit mask were respectively designed to produce a line laser beam with Gaussian spatial energy profile and square-like. The frequency responses of the theoretical models showed good agreement with experimental results in terms of the existence of harmonic frequency components and the shift of the first peak frequencies to low.