• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.31-39
• /
• 2009

This paper presents the single supply power line communication(PLC) SoC ASIC with built-in analog frond-end circuit. To achieve the low power consumption along with low chip cost, this PLC SoC ASIC employs fully CMOS analog front-end(AFE) and several built-in Regulators(LDOs) powering for Core logic, ADC, DAC and IP Pad driver. The AFE includes RX of pre-amplifier, Programmable gain amplifier and 10 bit ADC and TX of 10bit Digital Analog Converter and Line driver. This PLC Soc was implemented with 0.18um 1 Poly 5 Metal CMOS process. The single power supply of 3.3V is required for the internal LDOs. The total power consumption is below 30mA at standby and 300mA at active which meets the eco-design requirement. The chips size is $3.686\;{\times}\;2.633\;mm^2$.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.303-309
• /
• 1988

The heat generation at the start-up period of an autogeneous single screw extruder was determined with various feed materials, die structure and operational conditions. The highest heat generation rate was observed with defatted soybean meal, while the lowest value was obtained with rice flour, and wheat and barley flour showed the intermediate rate. As the moisture content of the flour decreased and the screw speed increased, the electric power requirement and heat generation rate increased. The temperature at compression section increased with the decrease in the particle size. The same effect was also observed as breaker plate was installed. The optimum operation was established as the temperature profile was maintained in decreasing order of metering section, die and compression section.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.96-103
• /
• 2015

The aim of this paper is to analyze combustion characteristics of treated woods by fire retardants which are prepared by several borate and phosphate compound solutions. The combustion characteristics for flame retardant treated wood were carried out using thermogravimetric analysis (TGA) to measure their combustion heat and flame retardant test using cone-calorimeter. The result of TGA and flame retardant test showed that single chemical solution affected the char forming and flame delay. The mixed retardants solutions was believed to be related to the efficacy and property of single chemical. The retention value and concentration of the retardants also affected the performance of fire retardant treated woods. The fire retardants FR1 and FR2 satisfied the requirement of The 3 Grade of Korean building codes.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.70
• /
• pp.1-20
• /
• 2016

This study is to find the accurate interpretations for the UCP600 by integrating, ISBP745, Official Opinions of ICC Banking Commission and some Case Laws suggesting the reasonable implication for the upcoming UCP. Major results analyzed by this study are as follows. First, The preclusion rule, UCP600 Article 16(c), is closely connected with the doctrine of documentary cure, so the banks requirement of Single Notice must state all the discrepancies of the documents presented. Exceptionally if the cured documents by the presenter are happened to be inconsistent the initial notice the bank can require the presenter to re-tender within the expiry date or the last day for presentation. Secondly, The Issuing Bank can utilize the right of seeking a waiver of documentary discrepancies from the applicant with the time limit of 5 banking days. If the bank wants to require an applicant to report discrepancies promptly, he may include a provision in the reimbursement engagement limiting the time limit within which the applicant must give notice of facial discrepancies. Thirdly, if a credit contains a non-documentary condition, banks will deem such condition as not states and will disregard it. According to the principle of private autonony if a credit contains a non-documentary condition to be consistent with by the parties concerned in a credit the non-documentary condition can be treated, as an effective condition itself. Fourthly, according to the Korean Supreme Court's decision, negotiation includes the method of crediting the credit amount and then transfers such funds into a special account and controls the account. Finally, UCP600 Article 33 states a bank has no obligation to accept a presentation outside of its banking hours. However, there is no rule in UCP600 in regard to a presentation after the close of business. Hopefully the upcoming UCP has to stipulates a sort of definite article to determine such ambiguous.

• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.97-101
• /
• 1994

Fifteen strains of the nitrogen fixer Axospirillum were isolated from the rhizosphere of rice collected from Kyonggi-do and Chungcheongnam in Korea. They had strong acetylene-reducing activity of 400 of 900 nmol $C_2H_4$ per hour vial had a similar morphology in succinate-malate medium: vibrioid cells having a diameter of 1.0 ${\mu}m$ and a monopolar single flagellum in liquid media. According to their physiological and morphological characteristics, they were divided into two distinct groups, group I and group II. Group I strain were, unlike group II, distinguished by their ability to use glucose as a sole carbon source in nitrogen-free medium, requirement for biotin, and formation of wider, longer, and S-shaped cells in semisolid nitrogen-free malate medium. On the basis of their characteristics, strains belonging to group I were identified as Azospirillum lipoferum, while those belonging to group II were identified as Azospirillum brasilense.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.961-971
• /
• 2015

As a representative area-decomposed algorithm, an area-based quad-trie (AQT) has an issue of search performance. The search procedure must continue to follow the path to its end, due to the possibility of the higher priority-matching rule, even though a matching rule is encountered in a node. A leaf-pushing AQT improves the search performance of the AQT by making a single rule node exist in each search path. This paper proposes a new algorithm to further improve the search performance of the leaf-pushing AQT. The proposed algorithm implements a leaf-pushing AQT using a hash table and an on-chip Bloom filter. In the proposed algorithm, by sequentially querying the Bloom filter, the level of the rule node in the leaf-pushing AQT is identified first. After this procedure, the rule database, which is usually stored in an off-chip memory, is accessed. Simulation results show that packet classification can be performed through a single hash table access using a reasonable sized Bloom filter. The proposed algorithm is compared with existing algorithms in terms of the memory requirement and the search performance.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.789-800
• /
• 2021

Objective: Conservation and genetic improvement of cattle breeds require information about genetic diversity and population structure of the cattle. In this study, we investigated the genetic diversity and population structure of the three cattle breeds in the Korean peninsula. Methods: Jeju Black, Hanwoo, Holstein cattle in Korea, together with six foreign breeds were examined. Genetic diversity within the cattle breeds was analyzed with minor allele frequency (MAF), observed and expected heterozygosity (HO and HE), inbreeding coefficient (FIS) and past effective population size. Molecular variance and population structure between the nine breeds were analyzed using a model-based clustering method. Genetic distances between breeds were evaluated with Nei's genetic distance and Weir and Cockerham's FST. Results: Our results revealed that Jeju Black cattle had lowest level of heterozygosity (HE = 0.21) among the studied taurine breeds, and an average MAF of 0.16. The level of inbreeding was -0.076 for Jeju Black, while -0.018 to -0.118 for the other breeds. Principle component analysis and neighbor-joining tree showed a clear separation of Jeju Black cattle from other local (Hanwoo and Japanese cattle) and taurine/indicine cattle breeds in evolutionary process, and a distinct pattern of admixture of Jeju Black cattle having no clustering with other studied populations. The FST value between Jeju Black cattle and Hanwoo was 0.106, which was lowest across the pair of breeds ranging from 0.161 to 0.274, indicating some degree of genetic closeness of Jeju Black cattle with Hanwoo. The past effective population size of Jeju Black cattle was very small, i.e. 38 in 13 generation ago, whereas 209 for Hanwoo. Conclusion: This study indicates genetic uniqueness of Jeju Black cattle. However, a small effective population size of Jeju Black cattle indicates the requirement for an implementation of a sustainable breeding policy to increase the population for genetic improvement and future conservation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.257-264
• /
• 2019

This paper presents a single image haze removal method via a pixel-based joint BDCP (bright and dark channel prior) and a hierarchical bilateral filter in order to reduce computational complexity and memory requirement while improving the dehazing performance. Pixel-based joint BDCP reduces the computational complexity compared to the patch-based DCP, while making it possible to estimate the atmospheric light in pixel unit and the transmission more accurately. Moreover the bilateral filter, which can smooth an image effectively while preserving edges, refines the transmission to reduce the halo effects, and its hierarchical structure applied to edges only prevents the increase of complexity from the iterative application. Experimental results on various hazy images show that the proposed method exhibits excellent haze removal performance with low computational complexity compared to the conventional methods, and thus it can be applied in various fields.

• Korean Journal of Remote Sensing
• /
• v.38 no.1
• /
• pp.111-126
• /
• 2022

Land use and land cover (LULC) mapping is an important factor in geospatial analysis. Although highly precise ground-based LULC monitoring is possible, it is time consuming and costly. Conversely, because the synthetic aperture radar (SAR) sensor is an all-weather sensor with high resolution, it could replace field-based LULC monitoring systems with low cost and less time requirement. Thus, LULC is one of the major areas in SAR applications. We developed a LULC model using only KOMPSAT-5 single co-polarized data and digital elevation model (DEM) data. Twelve HH-polarized images and 18 VV-polarized images were collected, and two HH-polarized images and four VV-polarized images were selected for the model testing. To train the LULC model, we applied the conditional generative adversarial network (cGAN) method. We used U-Net combined with the residual unit (ResUNet) model to generate the cGAN method. When analyzing the training history at 1732 epochs, the ResUNet model showed a maximum overall accuracy (OA) of 93.89 and a Kappa coefficient of 0.91. The model exhibited high performance in the test datasets with an OA greater than 90. The model accurately distinguished water body areas and showed lower accuracy in wetlands than in the other LULC types. The effect of the DEM on the accuracy of LULC was analyzed. When assessing the accuracy with respect to the incidence angle, owing to the radar shadow caused by the side-looking system of the SAR sensor, the OA tended to decrease as the incidence angle increased. This study is the first to use only KOMPSAT-5 single co-polarized data and deep learning methods to demonstrate the possibility of high-performance LULC monitoring. This study contributes to Earth surface monitoring and the development of deep learning approaches using the KOMPSAT-5 data.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.335-342
• /
• 2022

In this paper, a single-bit 3rd-order feedforward delta sigma modulator is proposed for audio applications. The proposed modulator is based on a class-C inverter for low voltage and power applications. For the high-precision requirement, the class-C inverter with regulated cascode structure increases its DC gain and acts as a low-voltage subthreshold amplifier. The proposed Class-C inverter-based modulator is designed and simulated in 180-nm CMOS process. With no performance loss and a low supply voltage compatibility, the proposed class-C inverter-based switched-capacitor modulator achieves high power efficiency. This design achieves an signal-to-noise-and-distortion ratio (SNDR) of 93.9 dB, an signal-to-noise ratio (SNR) of 108 dB, an spurious-free dynamic range (SFDR) of 102 dB, and a dynamic range (DR) of 102 dB at a signal bandwidth of 20 kHz and a sampling frequency of 4 MHz, while only using 280 μW of power consumption from a 0.8-V power supply.