• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1700-1702
• /
• 1996

Solid oxide fuel cell(SOFC) is an electrochemical energy device which converts the free energy of fuel gas directly to electric energy. SOFC has several diratinct advantages over other types of fuel cells: no use of noble metals, no requirement of a reformer, no problem of liquid electrolyte management, and no problem of corrosion by liquid electrolyte. In this study, we have investigated the cell components and the single cell of the planar SOFC fabricated by composite plate process, in which green films of electrolyte, anode and cathode were co-fired. The planar SOFCs were tested and the cell performance characteristics wag evaluated by using electrochemical methods.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.31
• /
• pp.137-153
• /
• 2006

The thesis examines the problems for innovation of export and import conditions and shows the various ways of overcoming them. The alternatives of export and import conditions are as follows. First, the government body including customs service should participate on positive lines for the construction of single window and standardization of the required documents. Second, it is required the development of efficient connection system among exporter and importer, customs service, requirement confirmation agency etc. to contribute the simplification of a operation. Therefore this research is intended to improve understanding of changes for innovation and to contribute in support basis, operation structure, legal and institutional side. Practical implications regarding the innovation of export and import conditions for electronic trade are discussed.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.559-567
• /
• 2014

In this paper, a framework for power allocation of downlink transmissions in orthogonal frequency division multiple access-based decode-and-forward cellular relay networks is investigated. We consider a system with a single base station communicating with multiple users assisted by multiple relays. The relays have limited power which must be divided among the users they support in order to maximize the data rate of the whole network. Advanced power allocation schemes are crucial for such networks. The optimal relay power allocation which maximizes the data rate is proposed as an upper bound, by finding the optimal power requirement for each user based on knapsack problem formulation. Then by considering the fairness, a new relay power allocation scheme, called weighted-based scheme, is proposed. Finally, an efficient power reallocation scheme is proposed to efficiently utilize the power and improve the data rate of the network. Simulation results demonstrate that the proposed power allocation schemes can significantly improve the data rate of the network compared to the traditional scheme.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.475-480
• /
• 1994

For the effective management of medical images, it becomes popular to use computing machines in medical practice, namely PACS. However, the amount of image data is so large that there is a lack of storage space. We usually use data compression techniques to save storage, but the process speed of machines is not fast enough to meet surgical requirement. So a special hardware system processing medical images faster is more important than ever. To meet the demand for high speed image processing, especially image compression and decompression, we designed and implemented the medical image CODEC (COder/DECoder) based on MISD (Multiple Instruction Single Data stream) architecture to adopt parallelism in it. Considering not being a standard scheme of medical image compression/decompression, the CODEC is designed programable and general. In this paper, we use JPEG (Joint Photographic Experts Group) algorithm to process images and evalutate the CODEC.

• Transactions of Materials Processing
• /
• v.17 no.4
• /
• pp.263-271
• /
• 2008

Process design is carried out for a press forming of a CTBA in the rear suspension assembly based on the result of the finite element analysis. The analysis simulates the two-stage stamping process with the initial design and it fully reveals the unfavorable mechanism which develops inferiorities during forming. In this paper, a new design guideline is proposed to modify the process and tool shapes for a single-stage forming process. With the improved tool design, prototypes are fabricated after several try-out processes. Results of the durability tests show that the design requirement of the part is satisfied and the effective weight reduction is achieved.

• Journal of Welding and Joining
• /
• v.11 no.1
• /
• pp.42-51
• /
• 1993

In this study, investigations were conducted in calculating parameters of elastic-plastic fracture mechanics using single specimen. The validity of these testing methods was judged by the confirmation of multiple specimen method of stop block test. The results were as follows: In order to measure a fracture toughness using the instrumented impact test, two general requirement must be considered; One, setting up proper impact velocity considered the effect of loading and the other, the necessity of low blow test for obtaining true energy by the compliance correction. It was possible to detect a crack initiation point by calculating the compliance changing rate from a load-defection curve. Criterion of a stable crack growth, $T_{mat}$ could be estimated by using key-curve method for a base metal. and combining Kaiser's rebound compliance with Paris-Hutchison's $T_{appl}$ equation for the brittled zone of welding heat affected.at affected.d.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.65-76
• /
• 1990

A lot-sizing model for multi-stage MRP systems is proposed, in which known demands must be satisfied. In this model, an approach with considerations of initial inventory and limited production capacity is involved. Most of the studies on the lot-sizing techniques for multi-stage material requirement planning systems have been focused upon two basic approaches. One approach is to develope an algorithm yielding an optimal solution. Due to the computational complexity and sensitivity of the optimal solution to the problem of lot sizing, heuristic approaches are often employed. In this paper, the heuristic approach is used by sequential application of a single-stage algorithm with a set of modified cost by the concept of multi-echelon costs. The proposed method is compared with an lot-sizing method(Florian-Klein Model) to prove its effectiveness by numerical examples.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.113-114
• /
• 2016

This paper proposes a technical requirements analysis of implementation of multi-trade prefabrication. Recently, there has been a rise in the use of prefabrication to minimize on-site work for time reduction to increase productivity. Prefabrication technique is evolved into multi-trade prefabrication combining other trades from single-trade prefabrication. For implementation of new technique, not only itself but complementary techniques have to be prepared. In this paper, MEP corridor rack, a major item of multi-trade prefabrication, was implemented in the test bed and its process was analyzed to find out technical requirements. As a result, comparatively high level of IT technique was required for efficient use of multi-trade prefabrication in design, lifting and construction phase. In design phase, component level of BIM library was needed for manufacturing; and in lifting phase, BIM-based site logistics process was required. Also in construction phase, laser scanning was implemented for gathering shape and geometry of the wall and slab that were attached to multi-trade prefabrication module.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2067-2075
• /
• 2016

Cascaded H-bridge multilevel inverters are currently used because it enables the integration of various sources, such as batteries, ultracapacitors, photovoltaic array and fuel cells in a single system. Conventional modulation schemes for multilevel inverters have concentrated mainly on the generation of a low harmonic output voltage, which results in less effective utilization of connected sources. Less effective utilization leads to a difference in the charging/discharging of sources, causing unsteady voltages over a long period of operation and a reduction in the lifetime of the sources. Hence, a charge balance control scheme has to be incorporated along with the modulation scheme to overcome these issues. In this paper, a new approach for charge balancing in symmetric cascaded H-bridge multilevel inverter that enables almost 100% charge balancing of sources is presented. The proposed method achieves charge balancing without any additional stages or complex circuit or considerable computational requirement. The validity of the proposed method is verified through simulation and experiments.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.120-127
• /
• 2002

The multicasting is defined as the distribution of the same information stream from one to many nodes concurrently. There has been an intensive research effort to design protocols and construct multicast routing graphs for a single multicast group. However. there have been few researches about the relation between multiple and concurrent multicast groups. In this paper, the multiple multicast tree allocation algorithm to avoid congestion is proposed. The multicast group with different bandwidth requirement is also considered. A two-phase algorithm is proposed. The first phase is for basic search and the second phase for further improvement. The performance of the proposed algorithm is experimented with computational results. Computational results show that the proposed algorithm outperforms an existing algorithm.