• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.119-128
• /
• 2015

본 연구에서는 파일지지식 소파방파제의 파압특성을 2차원 수리모형실험을 통해 분석하였다. 단일 유공벽 및 이중 유공벽을 가진 모형체를 통해 실험을 수행하였으며, 측정된 파압결과는 Goda 파압과 비교분석하였다. 단일 유수실의 경우, 측정된 최대파압이 Goda 파압과 비교하여 전면벽의 경우 25%, 후면벽의 경우 30%가 감소하였다. 이중 유수실의 경우에는 최대파압이 Goda 파압대비 전면벽 27%, 중간벽 53%, 후면벽 64% 감소한 것을 알 수 있다. 이로부터 이중 유공벽을 가진 소파방파제가 단일 유공벽의 경우와 비교하여 파압이 현저히 감소하는 것을 알 수 있었으며, 이는 유공 1실과 2실의 횡슬릿의 유공벽을 통과하면서 발생하는 파랑에너지의 소산으로 인해 후면벽에 작용하는 파압의 크기가 작아졌기 때문으로 판단된다.

• Environmental Engineering Research
• /
• 제15권2호
• /
• pp.71-78
• /
• 2010

To understand the effects of acclimation schemes on the formation of anode biofilms, different electrical performances are characterized in this study, with the roles of suspended and attached bacteria in single-chamber microbial fuel cells (MFCs). The results show that the generation of current in single-chamber MFCs is significantly affected by the development of a biofilm matrix on the anode surface containing abundant immobilized microorganisms. The long-term operation with suspended microorganisms was demonstrated to form a dense biofilm matrix that was able to reduce the activation loss in MFCs. Also, a Pt-coated anode was not favorable for the initial or long-term bacterial attachment due to its high hydrophobicity (contact angle = $124^{\circ}$), which promotes easy detachment of the biofilm from the anode surface. Maximum power ($655.0\;mW/m^2$) was obtained at a current density of $3,358.8\;mA/m^2$ in the MFCs with longer acclimation periods. It was found that a dense biofilm was able to enhance the charge transfer rates due to the complex development of a biofilm matrix anchoring the electrochemically active microorganisms together on the anode surface. Among the major components of the extracellular polymeric substance, carbohydrates ($85.7\;mg/m^2_{anode}$) and proteins ($81.0\;mg/m^2_{anode}$) in the dense anode biofilm accounted for 17 and 19%, respectively, which are greater than those in the sparse anode biofilm.

• 한국수자원학회논문집
• /
• 제46권4호
• /
• pp.327-334
• /
• 2013

본 연구에서는 단면수리실험으로 다양한 실험파 조건과 유수실 폭(B)을 변화시키면서 유공부 길이(S)와 반사율의 관계를 검토하여 유공 1실인 유공구조물의 정수면 아래 최적 유공부 길이를 제시하였다. 입사파로 불규칙파를 적용함에 따라 최저 반사계수는 상대 유수실 폭($B/L_s$)이 $B/L_s{\approx}0.15$에서 발생하였다. 유공부 길이와 입사파고와의 관계를 고려한 상대 유공부 길이($S/H_s$)는 $S/H_s{\approx}2.5$에서 최저 반사계수를 보였으며, 이는 정수면 아래 유공부 길이가 입사파고의 약 2.5배일때 최적임을 의미하는 것이다.

• 로봇학회논문지
• /
• 제13권2호
• /
• pp.92-96
• /
• 2018

In this paper, a soft robotic arm which can prevent impact injury during human-robot interaction is introduced. Two degrees of freedom joint are required to realize free movement of the robotic arm. A robotic joint concept with a single degree of freedom is presented using simple inflatable elements, and then extended to form a robotic joint with two degrees of freedom joint using similar manufacturing methods. The robotic joint with a single degree of freedom has a joint angle of $0^{\circ}$ bending angle when both chamber are inflated at equal pressures and maximum bending angles of $28.4^{\circ}$ and $27.1^{\circ}$ when a single chamber if inflated. The robotic joint with two degrees of freedom also has a bending angle of $0^{\circ}$ in both direction when all three chambers are inflated at equal pressures. When either one or two chambers were pressurized, the robotic joint performed bending towards the uninflated chambers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.122-122
• /
• 2000

Magnesium oxide is thermodynamically very stable, has a low dielectric constant and a low refractive index, and has been widely used as substrate for growing various thin film materials, particulary oxides of the perovskite structure. There has been a considerable interest in integrating the physical properties of these oxides with semiconductor materials such as GaAs and Si. In this regard, it is considered very important to be able to grow MgO buffer layers epitaxially on the semiconductors. Various oxide films can then be grown on such buffer layers eliminating the need for using MgO single crystal substrates. Vapor phase epitaxy of magnesium oxide has been accomplished on Si(001) substrates in a high vacuum chamber using the single precursor methylmagnesium tert-butoxide in the temperature range 750-80$0^{\circ}C$. For the epitaxy of the MgO films, SiC buffer layers had to be grown on Si(001). The films were characterized by reflection high energy electron diffraction (RHEED) in situ in the growth chamber, and x-ray diffraction (XRD), x-ray pole figure analysis, scanning electron microscopy (SEM), and x-ray photoelectron spectroscopy (XPS) after the growth.

• Journal of Chest Surgery
• /
• 제18권1호
• /
• pp.13-18
• /
• 1985

Cortriatriatum is rare congenital heart disease characterized by the presence of a fibromuscular diaphragm that subdivides the left atrium into a proximal or "accessory" and a distal or "true" left atrial chamber. A 15 year old girl with cortriatriatum underwent surgical correction at the department of Thoracic and Cardiovascular Surgery, Soonchunhyang College in November, 1984. This case was preoperatively diagnosed as a single atrium with functional tricuspid regurgitation But on operation, we found that there were transverse septum in the left atrium through large ASD, low chamber receives the pulmonary veins, and the upper chamber gives rise to the left atrial appendage and leads to the mitral valve. And the anomalous membrane has no fenestrations. We excised completely the anomalous septum, reconstructed atrial septal defect with dacron patch and performed the tricuspid annuloplasty with DeVega method. Postoperative course was uneventful during follow up, during follow up.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1811-1820
• /
• 2005

Thermo-acoustic instability of methane/ air flames in an industrial gas-turbine combustor is numerically investigated adopting CFD analysis. The combustor has 37 EV burners through which methane and air are mixed and then injected into the chamber. First, steady fuel! air mixing and flow characteristics established by the burner are investigated by numerical analysis with single burner. And then, based on information on the flow data, the burners are modeled numerically via equivalent swirlers, which facilitates the numerical analysis with the whole combustion system including the chamber and numerous burners. Finally, reactive flow fields within the chamber are investigated numerically by unsteady analysis and thereby, spontaneous instability is simulated. Based on the numerical results, scaling analysis is conducted to find out the instability mechanism in the combustor and the passive control method to suppress the instability is proposed and verified numerically.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.242-247
• /
• 2003

An experimental study presents characteristics of combustion in a combustion chamber by port deactivation valve for economy and emissions standards. In order to use combustion properties data it is necessary to build some data base, which use cylinder pressure sensor, etc. Port deactivation valve has been developed to satisfy requirement of achieving sufficient swirl generation to improve the combustion. A feasibility and necessity of combustion pressure based cylinder spark timing control has been examined. So, this was obtained the Coefficient of Variation(COV) and the mass-burned(MFB). The characteristics of pressure ratio fraction is similar to that of mass-burned fraction. Using the results of the test, the effects of the combustion chamber can be improved combustion stability by port deactivation.

• 한국분무공학회지
• /
• 제19권3호
• /
• pp.123-129
• /
• 2014

A diesel spray overall SMD (Sauter mean diameter) in a spray chamber was simulated with CFD by varying the compression ratio in the spray chamber from 18:1 to 100:1. The gas densities of the spray chambers for the compression ratios of 18:1 and 100:1 were 17.97 and $74.8kg/m^3$, respectively. Standard KIVA-3V code was used for the CFD simulation. Various fuel injection patterns such as single injection, pilot injection and split injection were used for the CFD simulation. Fuel injection pressures for the simulated diesel sprays are 90 and 120 MPa. As the compression ratio increases, the CFD simulated SMD was decreased, which was generally in agreement with previous experimental studies.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.145-152
• /
• 2003

The objective of the present study is to develop methodology for the assesment of combustion stability of liquid rocket injectors. To simulate actual combustion occurring inside of a thrust chamber, a full-scale injector has been employed in the study, which burns gaseous oxygen and mixture of methane and propane. The main idea of the experiment is that the mixing mechanism is considered as a dominant factor significantly affecting combustion instability in a full-scale thrust chamber. Single & multi split triplet injectors have been used with an open-end cylindrical combustion chamber. The characteristics revealed by excited dynamic pressures in gaseous combustion show degrees of relative acoustic damping depending on operating conditions. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.