• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.99-123
• /
• 1997

Performance analysis of NTT/BT protocol is investigated, which is a GFC (Generic Flow Control) ptotocol in ATM (Asynchronous Transfer Mode ) network and is based on cyclic reset mechanism. THe mean cell delay time is proposed as a performance measure of NTT/BT protocol. The mean cell delay time is defined as the duration from the instant the cell arrives at the transmission buffer until the cell is fully transmitted. The process of cell transmission can be described as a single server queueing modle with two dependent services. By utilizing this model, mean cell delay time is obtained and sensitivity of the factors such as window size and reset period is also analysed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.575-578
• /
• 2004

In this study, we designed HAN(hybrid-aligned nematic) cell using novel tilt angle control method. It was possible to make novel HAN cell using a single polyimide by hot plate baking method. This new HAN cells showed slower response time as compared with conventional HAN cell. However, the alignment state and V-T curve of HAN cell using novel method were acceptable. Also, it showed better C-V characteristic than that of conventional HAN cell.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.42-50
• /
• 2001

The activity of immobilized cell-support particle aggregates is influenced by physical and biochemical elements, mass transfer, and physiology. Accordingly, the mathematical model discussed in this study is capable of predicting the steady state and transient concentration profiles of the cell mass and substrate, plus the effects of the substrate and product inhibition in an immobilized cell-support aggregate. The overall mathematical model is comprised of material balance equations for the cell mass, major carbon source, dissolved oxygen, and non-biomass products in a bulk suspension along with a single particle model. A smaller bead size and higher substrate concentration at the surface of the particle, resulted in a higher supply of the substrate into the aggregate and consequently a higher biocatalyst activity.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.981-986
• /
• 2003

Recently, a fuel cell is remarkable for new generation system. The fuel cell generation system converts the chemical energy of a fuel directly into electrical energy. The fuel cell generation is characterized by low voltage and high current. For connecting to utility, it needs both a step up converter and an inverter. The step up converter makes DC link and the inverter changes D.C to A.C. In this paper, full bridge converter and the single phase inverter are designed and installed for fuel cell. Simulation and experiment verify that fuel cell generation system could be applied for the distributed generation.

• Korean Journal of Animal Reproduction
• /
• v.7 no.1
• /
• pp.24-29
• /
• 1983

These experiments were carried out to obtain basic information necessary of the success of in vitro culture of blastomeres separated from mouse embryo. Total 446 single blastomeres separated from 2-, 4- and 8-cell mouse embryos by protease treatment (0.5% in Whittingham's medium), were cultured under the gas phase of 5% CO2 in air at 37$^{\circ}C$. whittingham's medium was used for culture of blastomeres. The results obtained in these experiments were summerized as follows: 1. Of total 446 blastomeres cultured, 127(87.0%), 134(73.2%) and 77(65.8%) blastomeres separated repectively from 2-, 4- and 8-cell embryos were developed to morula or blastular stages. 2. The numbers of blastomeres, being separated from 2-. 4- and 8-cell embryos and developing to blastocysts containing inner cell mass, were 97(76.4%), 86(64.2%) and 33(42.9%) respectively. 3. After in vitro culture of the blastomeres, the incidence of trophoblastic vesicles increased with the development of the cell stage of embryo. In case of blastomeres separated from 8-cell embryos, 50.6% of blastomeres that developed to blastular stage was trophoblastic vesicles.

• Applied Microscopy
• /
• v.13 no.1
• /
• pp.63-70
• /
• 1983

The cell division of Bacillus thuringiensis are studed by a electron microscope. It was observed that when the cell division was occurred, the bacterial transverse septeum was centripetally formed, and the bacterial spore was divided into two daughter cells. The fore spore septum was initiated by invagination from either sides of the cell membranes, and was easily distinguished it from the transverse septum of the vegetative cell division. The large vesicular mesosome was. observed at one end of the cell membrane. The nucleoids were of variously irregular shapes and had no a nuclear membrane. The morphology of the bacteria was visualizd by a scanning electron microscope. The surface of the cell was generally rough and had a single polar flagellum, which was appeared to be $0.2{\mu}$ in width and $13{\mu}$ in length.

• The Korean Journal of Zoology
• /
• v.34 no.3
• /
• pp.389-393
• /
• 1991

To obtain monozygotic multiplets from 8-cell mouse embryos, we artificially constructed chimeric embryos by introducing one blastomere (donor) of 8-cell embryos of Fl hybrid (C57BL/6 X CBA) mice into 4-cell ICR mouse embryos (carrier) of which one blastomere had been previously removed with a micromanipulator. After 42 h of culture, the developmental frequency of chimeric embryos to normal morula and blastocyst was 95% (310/328). When chimeric embryos at morula or blastocvst stage were transferred to pseudopregnant mice,39%, (70/180) of them were born. Most of the offspring (56/70) were the carrier type in coat color, whereas only three of them were the donor type, of which ho were assumed to be derived from single 8-cell donor embryo. Because the two donor type mice Ivere the same sex and produced only the donor type offspring from a testcross, they are probably monozvgotic multiplets of 8-cell mouse embryos. However, since their internal chimerism was not able to be examined, it remains to be determined if their genetic constitutions are identical.

• Proceedings of the KIEE Conference
• /
• 2008.11b
• /
• pp.77-78
• /
• 2008

Recently, a fuel cell is remarkable for new generation system. The fuel cell generation system converts the chemical energy of a fuel directly into electrical energy. The fuel cell generation is characterized by low voltage and high current. For connecting to utility, it needs both a step up converter and an inverter. The step up converter makes DC link and the inverter changes DC to AC. In this paper, full bridge converter and the single phase inverter are designed and installed for fuel cell. Simulation and experiment verify that fuel cell generation system could be applied for the distributed generation. In this paper, the 1.5kW active clamp current-fed full bridge converter employing MOSFETs is operated to discharge the battery whereas a voltage-fed half bridge converter employing IGBTs is operated to charge the battery.

• The Korean Journal of Cytopathology
• /
• v.18 no.2
• /
• pp.153-156
• /
• 2007

Primary small cell carcinoma of the urinary bladder is an extremely rare but important entity. We experienced a case of small cell carcinoma of the urinary bladder diagnosed by urine cytology. A 59-year-old man presented with gross hematuria and dysuria, and a calcified mass was detected at the left ureterovesical junction by cystoscopy. Abdominal ultrasonography revealed focal wall thickening at the left lateral side of the urinary bladder, and urine cytology findings were of an inflammatory background and atypical small round cells with minute hyperchromatic or pyknotic nuclei, scant cytoplasm, and rare nucleoli. In addition, atypical cells were scattered in an isolated single cell pattern or in small loose clusters with prominent nuclear molding. Subsequent histological and immunohistochemical examinations confirmed a diagnosis of small cell carcinoma.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1298-1300
• /
• 1993

Compensation of temperature is very important to make high precision Load Cell. In this study, we developed a new type of load cell. The structure of the load cell has four strain gauges m single surface of the load cell. Also a new temperature compensation method is proposed and these, characteristics are better than previous one. This study will offer application to other type of load cell end another sensors.