• 한국환경성돌연변이발암원학회:학술대회논문집
• /
• 한국환경성돌연변이발암원학회 2004년도 춘계학술대회
• /
• pp.95-95
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.234-235
• /
• 2000

최근에 많이 사용되는 휴대용 기기의 표시장치인 액정표시장치(LCD)에는 반사형이 많이 사용되고 있다. 반사형 LCD는 전력소모의 많은 부분을 차지하는 backlight를 주변광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로 많이 연구되고 있다. 특히, 반사형 LCD는 밝기면에서 우수한 single-polarizer mode가 적합하다$^{1.3}$ . 그러나 single-polarizer mode는 two-polarizer mode와 비교해서 dark 상태에서의 누설광이 많이 발생하여 대비비가 저하되는 단점이 있다. 이 점을 보완하기 위하여 전 파장 영역에서 편광판에 의해 반사광이 차단될 수 있도록 설계를 했다. (중략)

• 한국가축번식학회지
• /
• 제27권3호
• /
• pp.225-231
• /
• 2003

본 연구는 생체 내 세포 및 조직배양기로서의 면역결핍동물을 개발할 목적으로 proximal lck promoter와 DT-A gene를 이용하여 형질전환생쥐을 생산하고 이 형질전환생쥐의 면역세포에서 DT-A gene이 발현되는지를 분석하였다. 형질전환생쥐와 정상생쥐로부터 thymus, spleen 및 liver에서 RNA를 추출하여 RT-PCR수행하였는데 정상생쥐의 조직에서는 어떠한 DT-A gene의 발현양상을 얻을 수 없었으나 형질전환생쥐의 thymus, spleen, liver에 DT gene의 발현을 확인할 수 있었고, Northern blotting을 이용하여 형질전환생쥐의 thymus, spleen 및 liver에서 DT-A gene이 강하게 발현되는 것으로 나타났다. 형질전환생쥐 $F_1$ 및 $F_2$ 산자의 혈액에서 T-cell 발달의 분포도를 확인하기 위해 CD4 및 CD8 antibody를 이용하여 FACS analysis를 실시하였는데 형질전환생쥐의 혈액 내 mature T-cell인 single positive thymocyte의 수가 정상생쥐에 비해 감소하는 경향을 나타냈다. 정상생쥐의 혈액 내 T-cell 중 $CD8^{+}$ T-cell의 경우 약 50%를 나타냈으나 형질전환생쥐의 경우 33%로 감소하였고, $CD4^{+}$ T-cell은 정상생쥐에서 10%를 차지하고 있으나 형질전환생쥐에서는 5.9%로 감소되는 것으로 분석되었다. 그러므로 본 연구의 형질전환생쥐에서 lck promoter에 의해 초기 immature한 상태의 T-cell에서 DT-A gene이 발현되어 발육중인 T-cell이 파괴 되어 mature 상태인 $CD4^{+}CD8^{-}$나 $CD4^{-}CD8^{+}$ cells (single-positive)들이 감소된 것으로 확인되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.69.1-69.1
• /
• 2005

• 기술사
• /
• 제15권1호
• /
• pp.36-40
• /
• 1982

This study is to characterize Ago stability useful for manufacturing silver oxide button cell, and deter mined by test tube gassing evaluations and by cell expansion and further discuss en the effectiveness of pellet reduction treatments to obtain single plateau discharge Profile and relevent performance.

• 대한생식의학회:학술대회논문집
• /
• 대한생식의학회 2007년도 제53차 추계학술대회 초록집
• /
• pp.114-114
• /
• 2007

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 연료전지심포지움 2002논문집
• /
• pp.105-110
• /
• 2002

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.306-309
• /
• 2005

One of the most critical issues in sol id oxide fuel cell (SOFC)running on hydrocarbon fuels is the risk of carbon formation from the fuel gas. The simple method to reduce the risk of carbon formation from the reactions is to add steam to the fuel stream, leading to the carbon gasification react ion. However, the addition of steam to fuel is not appropriate for the auxiliary power unit (APU) and potable power generation (PPG) systems due to an increase of complexity and bulkiness. In this regard, many researchers have focused on so-called 'direct methane' operation of SOFC, which works with dry methane without coking. However, coking can be suppressed only by the operation with a high current density, which may be a drawback especially for the APU and PPG systems. The single chamber fuel cell (SC-SOFC) is a novel simplification of the conventional SOFC into which a premixed fuel/air mixture is introduced. It relies on the selectivity of the anode and cathode catalysts to generate a chemical potential gradient across the cell. Moreover it allows compact and seal-free stack design. In this study, we fabricated honeycomb type mixed-gas fuel cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-structured SOFC with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites. We will discuss that the anode supported honeycomb type cell running on mixed gas condition.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2007

In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V], In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch S5 and S6 in the secondary switch, which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.235-238
• /
• 2005

Sulfonated poly(ether sulfone) copolymers (PESs) were synthesized using hydroquinone 2-potassium sulfonate (HPS) with other monomers (bisphenol A and 4-fluorophenyl sulfone). PESs with different $mole\%$ of hydrophilic group were prepared by changing the mole ratio of HPS in the polymerization reaction. The chemical structure and the thermal stability of these polymers were characterized by using $^1H-NMR$, FT-IR and TGA techniques. The PES 60 membrane, which has $60 mole\%$ of HPS unit in the polymer backbone, has a proton conductivity of 0.091 S/cm and good insolubility in boiling water. The TGA showed that PES 60 was stable up to $272^{\circ}C$ with a char yield of about $29\%\;at\;900^{\circ}C\;under\;N_2$ atmosphere. To investigate the single cell performance, the catalyst coated PES 60 membrane was used and a single cell test was carried out using $H_2/O_2$ gases as fuel and oxidant at various temperatures. We observed that the cell performance was enhanced by increasing the cell temperature. A current density of $1400 mA/cm^2$ at 0.60 V was obtained at $70^{\circ}C$.