• Journal of Hydrogen and New Energy
• /
• v.20 no.6
• /
• pp.479-484
• /
• 2009

The effect of anode gas channel height on gas diffusion and cell performance in a 100 $cm^2$ class molten carbonate single cell is investigated. Single cell separators with three different channel height are used. The effect of the gas channel height on the distribution of the reactive gas concentration is evaluated by the two-dimensional concentration diffusion equation. The overpotential caused by concentration drop with different channel height is estimated by the voltage decay related to diffusion of reactants, well known as concentration polarization, using limiting current density. The estimation could have the possibility to identify the reactant mass transfer polarization in the complicate factors of the overall electrodes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.99-102
• /
• 2006

Optimal flow-field design of bipolar-plates for a commercial class PEM(polymer electrolyte membrane) fuel cell stack was carried out on the basis of three-dimensional computational fluid dynamics(CFD) simulation. A three-dimensional CFD model originally developed by Shimpalee et al., has been utilized for performing large-scale simulation of a single fuel cell consisting of bipolar-plates gas diffusion layers, and a membrane-electrode-assembly(MEA). The CFD model is able to predict the current density, pressure drops, gas velocities, vapor and liquid water contents, temperature distributions, etc. inside a single fuel cell. Depending on simulation results from the CFD modeling of a PEM fuel cell, several flow-fields of bipolar-plates were designed and verified. The final design of the bipolar-plate has been chosen from the simulations and experimental tests and showed the best performance as expected from the simulation results under a normal operating condition. Thus, the CFD simulation approach to design the optimal flow-field of the bipolar-plates was successful. The final design was adopted as the best flow-field to build a commercial scale PEM fuel cell stack, the performance of which shows about 42% higher than that of the older bipolar-plate design.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.2916-2922
• /
• 2024

\\In memory semiconductors such as a static random access memory (SRAM), a common problem is soft errors under radiation environment. These soft errors cause bit flips, which are referred to as single event upsets (SEUs). Some radiation-hardened SRAM cells such as a Quatro SRAM, we-Quatro SRAM, and DICE SRAM cells have been reported for years. However, these designs have the disadvantage of taking up more area than a conventional 6T SRAM cell. Thus, we propose a radiation-hardened SRAM cell design that we named capacitor-static random access memory (C-SRAM) without area overhead. The C-SRAM is formed by simply adding a capacitor to the conventional 6T SRAM. It was designed to mitigate the radiation effect using the conservation law of electrical charge. Moreover, it has the same cell size as the conventional 6T SRAM cell. Its static noise margins (SNMs), which are indicators of operational stability, are equal to the conventional 6T SRAM values of 530 mV, 220 mV, and 860 mV in hold, read, and write modes, respectively. The results of the SEU simulation test showed that it had 4.761 times better flipping tolerance than the conventional 6T SRAM with a charge value of 247.494 fC. In addition, irradiation experiments also confirmed that the C-SRAM cell was more tolerant than the 6T SRAM cell. The conventional 6T SRAM and C-SRAM were fabricated using a standard 0.18 ㎛ CMOS process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.505-511
• /
• 2004

The effects of single cells of carrot or radish on the fecal excretion, mineral absorption rate and structure of small intestine and colon were investigated in rats fed 5% single cell diet for 4 weeks. Carrot contained 28.76% of total dietary fiber and 21.45% of insoluble dietary fiber, and radish contained 23.14% of total dietary fiber and 16.77% of insoluble dietary fiber on a dry weight basis. Total dietary fiber contents of the single cell were 44.68% for carrot, 48.0% for radish. Absorption rates of magnesium were higher in the carrot and radish single cell groups than the other groups. Cellulose significantly increased fecal weight and weight of small intestine. The consumption of cellulose and single cells decreased digestibility of lipid. The length of colon were longer in the carrot and the radish group than the other groups. Scanning electron microscopy studies showed that small intestine microvilli with leaf-shaped were seen in cellulose and single cell fed groups. These results suggest that the diet containing 5% single cells of carrot or radish increases the digestibility of dietary fiber, weight gain, and fecal output and shorten the gastrointestinal transit time.

• The Journal of the Korean bone and joint tumor society
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1999

A single fraction of 50 Gy extracorporeal irradiation, as a modality of limb-sparing operation, has been used to achieve tumor necrosis in osteosarcoma. Although this modality of radiation therapy preserving the mobility of a joint is commonly practiced, the precise knowledge on the radiobiological response of osteosarcoma cell has remained to be elucidated. We therefore observed whether a single high dose irradiation caused apoptosis in osteosarcoma cells and whether the commitment to apoptosis was associated with cell kinetics. We also investigated radiation dose response along the time course for development of apoptosis following single high dose irradiation. The morphologic change in apoptosis was observed by fluorescence with Hoechst 33258 and the degree and the fraction of cells by flow cytometry. Irradiation of osteosarcoma cells with 10, 30 and 50 Gy resulted in chromatin condensation and apoptotic body formation. The degree of apoptosis in osteosarcoma cells was $29.5{\pm}3.56%$, $39.9{\pm}4.83%$ at 24 and 48 hours after 10 Gy irradiation ; $41.1{\pm}3.93%$, $66.9{\pm}5.21%$ at 24 and 48 hours after 30 Gy irradiation ; and $48.0{\pm}3.69%$, $75.6{\pm}4.65%$ at 24 and 48 hours after 50 Gy irradiation. The fraction of cells in cell-cycle kinetic was $39.2{\pm}4.3%$ in G2/M, $22.1{\pm}4.65%$ in G1 at 24 hours after 10 Gy irradiation ; $51.0{\pm}4.3%$ in G2/M, $20.4{\pm}4.7%$ in G1 at 48 hours after 10 Gy irradiation ; $40.3{\pm}3.9%$ in G2/M, $26.1{\pm}4.7%$ in G1 at 24 hours after 30 Gy irradiation ; $59.2{\pm}3.9%$ in G2/M, $5.9{\pm}5.1%$ in G1 at 48 hours after 30 Gy irradiation ; and $44.3{\pm}4.2%$ in G2/M, $21.1{\pm}3.5%$ in G1 at 24 hours after 50 Gy irradiation. The fraction of cells at 48 hours after 50 Gy irradiation could not be observed because of irradiation induced cell death of most of cells. All values for irradiated cells showed accumulation in G2/M phase and reduction in G1 phase, irrespective of irradiation dose. The results suggest that a single fraction of high dose irradiation with 50 Gy results in accumulation of cells at G2/M phase, leading to apoptosis.

• Korean Journal of Animal Reproduction
• /
• v.20 no.3
• /
• pp.239-250
• /
• 1996

The objective of the present experiments were to determine whether micromanipulative and electro-stimulation conditions for blastomere survival overlapped those for oocyte activation in porcine. Eggs selected for in vitro development potential of blastomeres isolated from 4-cell embryos and oocyte activation by electrostimulation were equilibrated for 5~10 min, in 0.3M sucrose solution containing 7.5$\mu\textrm{g}$/ml cytochalasin B, and then electrostimulated for 30$\mu$sec using one pulse of 100, 120, 150 or 180 volts DC with electrodes 0.2mm apart. Single blastomeres were inserted into empty zona pellucida prior to electrostimulaticn. Then they were cultured in 20${mu}ell$ drops of fresh BECM to observe their developmental ability in vitro in a humidified incubat or at 38.5$^{\circ}C$. The results obtained from these experiments are as follows : 1. When one pulse of 100, 120, 150 or 180 volts DC for 30$\mu$sec were applied to porcine oocytes having the slit formed on zona pellucida for activation, activation rates were 65.1, 66.7, 70.7 and 91.7%, respectively. Higher activation rate was observed in 180V. 2. Infact oocytes incubated for 30 min, in 0.3M sucrose solution after electrostimulation were significantally different from control group with increasing of voltages(p<0.05). When voltages used for electrostimulation were increased, activation rates of oocytes were improved in all treatment groups. 3. When zona punctured-oocytes were only electrostimulated, or incubated in 0.3M sucrose solution for 30 min. after electrostimulation at 180 volt DC, activation rates were 90.5 and 95.5%, respectively. And activation rates of zona punctured-oocytes were significantly different from the groups for which zona pellucida was not punctured(P<0.05). 4. When single blastomeres form 4-cell transferred into empty zona pellucida were incubated for 0, 15 and 30 min. in 0.3M sucrose solution after electrostimulation using one pulse of 180 volt DC for 30 $\mu$sec, developmental rates of electrostimulated-single blastomeres to blastocyst were 72.5, 59.0 and 51.2%, respectively, and the ratio of control group developed to blastocyst were 80.0%. 5. The average cell number in electrostimulated-blastomeres developed to blastocyst were 7.9~10.8, and reduced than the cell number in diploid control ; Also cell number decreased with increasing of voltages. The results of these experiments indicate that the optimal condition for achieving in vitro developmental ability of single 4-cell blastomeres and oocyte activatin is 1 pulse, duration 30 $\mu$sec. in 180 volt, and incubation of blastomeres and oocytes in 0.3M sucrose solution after electrostimulation was not significantally different from another treatment groups. The results also show that this condition is suitable for nuclear transplantation using porcine eggs.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.2
• /
• pp.86-92
• /
• 2004

In this paper miniaturized disposable micro/nanofluidic components applicable to bio chip, chemical analyzer and biomedical monitoring system, such as blood analysis, micro dosing system and cell experiment, etc are reported. This system includes various microfluidic components including a micropump, micromixer, DNA purification chip and single-cell assay chip. For low voltage and low power operation, a surface tension-driven micropump is presented, as well as a micromixer, which was implemented using MEMS technology, for efficient liquid mixing is also introduced. As bio-reactors, DNA purification and single-cell assay devices, for the extraction of pure DNA from liquid mixture or blood and for cellular engineering or high-throughput screening, respectively, are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1627-1632
• /
• 1991

A compact type LDPE autoclave reactor is analyzed with respect to the effects of the initiator feed concentration and the rate of heat transfer by employing the mixing-cell model with backflow. Singularity theory is applied for the single-cell model so that one can construct all the possible bifurcation diagrams. Since the single-cell model may not be adequate for the actual reactor, a two-cell model is also treated to predict the dynamic behavior of the reactor. As the rate of heat transfer increases, various multiplicity patterns and oscillatory motions are found. Apparently, the monomer conversion can be substantially increased with proper he-at removal and initiator supplement scheme. For this, however, the complex dynamic features accompanied must be taken into consideration in the reactor design.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.55-58
• /
• 2000

This paper describes a single transistor type ferroelectric field effect transistor (1T FeFET) memory celt scheme which can select one unit memory cell and program/read it. To solve the selection problem of 1T FeEET memory cell array, the row direction common well is electrically isolated from different adjacent row direction column. So, we can control voltage of common well line. By applying bias voltage to Gate and Well, respectively, we can implant IT FeEET memory cell scheme which no interface problem and can bit operation. The results of HSPICE simulations showed the successful operations of the proposed cell scheme.

• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.84-87
• /
• 2006

Lateral distributions of locally injected electrons and holes in an oxide-nitride-oxide (ONO) dielectric stack of two different silicon-oxide-nitride-oxide-silicon (SONOS) memory cells are evaluated by single-junction charge pumping technique. Spatial distribution of electrons injected by channel hot electron (CHE) for programming is limited to length of the ONO region in a locally ONO stacked cell, while is spread widely along with channel in a fully ONO stacked cell. Hot-holes generated by band-to-band tunneling for erasing are trapped into the oxide as well as the ONO stack in the locally ONO stacked cell.