• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.825-837
• /
• 2017

본 논문에서는 하지 보행 장애를 가진 환자가 사용하는 크러치에 로봇 기술이 적용된 새로운 타입의 착용식 족형 보행 재활 로봇에 대해 서술하였다. 개발된 로봇의 주된 특징은 크게 세 가지로 나뉜다. 첫 번째, 착용 방식의 특징으로서, 팔꿈치에 착용하여 환자를 보조하는 엘보 크러치와 달리 환자의 가슴부에 족형 로봇을 착용함으로써 보행 시 넓은 가슴 면적으로부터 하중을 분산시키고 팔에 작용하는 집중 하중을 제거하였으며, 팔과 손의 움직임을 자유롭게 하였다. 두 번째, 사용자의 보행 의지를 파악하는 방법으로서, 족형 로봇의 발에 부착된 3축 힘센서를 이용하여 지면 반발력의 크기와 방향으로부터 사용자의 보행의도를 추정하는 알고리즘을 제안하였고 이에 따라 가슴 착용형 로봇을 보행시켰다. 마지막으로, 계단 보행을 위한 근력 강화 방법으로서, 둔턱을 오르내리는 근력 훈련이 가능하도록 바닥 높낮이에 따라 상하 운동 궤적이 변화할 수 있는 둔턱 보행 기능을 구현하였다. 최종적으로 개발된 로봇이 보행 의도를 인지하고 로봇 다리로부터 보행 보조를 효과적으로 수행할 수 있다는 것을 실험을 통하여 확인하였고, 하지 근전도 측정을 통하여 보행 시 로봇이 하지 근력을 보조하는 성능을 정량적으로 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.127.1-127
• /
• 2001

In this paper we propose an input/output model based fault diagnosis method to detect and isolate single faults in the robot arm control system. The proposed algorithm is functionally composed of three main parts-parameter estimation, fault detection, and isolation, When a change in the system occurs, the errors between the system output and the estimated output cross a predetermined threshold, and once a fault in the system is detected, and in this zone the estimated parameters are transferred to the fault classifier by ART2(adaptive resonance theory 2) neural network for fault isolation. Since ART2 neural network is an unsupervised neural network fault classifier does not require the knowledge of all possible faults to isolate the faults occurred in the system. Simulations are carried out to evaluate the performance of the proposed ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.26-30
• /
• 1995

In this study, the fuzzy approximator and sliding mode control (SMC) scheme are considered. An adaptive sliding mode control is proposed based on the SMC theory. This proposed control scheme is that a adaptive law is utilized to approximate the unknown function f by fuzzy logic system in designing the sliding mode controller for the nonlinear system. In order to reduce the approximation errors, the differences of nonlinear function and fuzzy approximator, an adaptive law is also intoduced and the stability of proposed control scheme are proven with simple adaptive law and roburst adaptive law. This proposed control scheme is applied to a single link robot arm.

• 소음진동
• /
• 제6권2호
• /
• pp.187-196
• /
• 1996

A new control strategy to actively control the vibration of a very flexible single link manipulator is proposed and experimentally realized. The control scheme consists of two actuators; a motor mounted at the beam hub and a piezoceramic bonded to the surface of the flexible link. The control torque of the motor to produce a desired angular motion is firstly determined by employing a sliding mode control theory on the equivalent rigid dynamics. The torque is then applied to the flexible manipulator in order to activate the commanded motion. During the motion, underirable oscillation is actively suppressed by applying a feedback control voltage to the piezoceramic actuator. Consequently, the desired tip position is favorably accomplished without vibration. Measured control responses are presented in order to demonstrate the efficiency of the proposed control methodology.

• 한국지능시스템학회논문지
• /
• 제15권3호
• /
• pp.318-323
• /
• 2005

본 논문에서는 불확실성을 포함한 연속시간 비선형 동적 시스템에 대한 퍼지 모델 기반 제어기의 지능형 디지털 재설계를 위한 조직적인 방법을 제안한다. 불확실 비선형 시스템을 표현하기 위해 연속시간 불확실 TS 퍼지 모델이 구성된다. 그리고, 안정화와 추적을 위한 퍼지 모델 기반 제어기 설계를 위해 PDC 기법이 이용된다. 마지막으로, 설계된 연속시간 제어기는 지능형 디지털 재설계 기법을 이용함으로써 이산시간 제어기로 전환됨을 증명하는 방법을 제안한다. 이 새로운 설계 기법은 퍼지 모델 기반 제어 이론과 불확실성을 가진 비선형 동적 시스템에 대한 진보된 디지털 재설계 기법의 통합을 위한 조직적이고, 효과적인 틀을 제공한다 마지막으로, 단일 링크 유연 로봇 시스템의 모의 실험을 이용해 개발된 설계 방법의 효용성과 실행 가능성을 입증한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권2호
• /
• pp.127-134
• /
• 2004

In this paper, human motor behaving model based sensory motor coordination(SMC) algorithm is implemented on robotic grasping task. Compare to conventional SMC models which connect sensor to motor directly, the proposed method used biologically inspired human behaving system in conjunction with SMC algorithm for fast grasping force control of robot arm. To characterize various grasping objects, pressure sensors on hand gripper were used. Measured sensory data are simultaneously transferred to perceptual mechanism(PM) and long term memory(LTM), and then the sensory information is forwarded to the fastest channel among several information-processing flows in human motor system. In this model, two motor learning routes are proposed. One of the route uses PM and the other uses short term memory(STM) and LTM structure. Through motor learning procedure, successful information is transferred from STM to LTM. Also, LTM data are used for next moor plan as reference information. STM is designed to single layered perception neural network to generate fast motor plan and receive required data which comes from LTM. Experimental results showed that proposed method can control of the grasping force adaptable to various shapes and types of greasing objects, and also it showed quicker grasping-behavior lumining time compare to simple feedback system.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.659-666
• /
• 2009

Recently, there are several problems in space, contiguity and facility of the existing harbors issued due to the trend of enlarging the container capacity of the large container vessel, the Mobile Harbor has been proposed conceptually as an effective solution for those problems. This concept is a kind of transfer loader of the containers from the large container ship, which is a floating barge with a catamaran type in the underwater part, and so prompt maneuverability and work effectiveness. For the safe mooring of two floating bodies, a container and the mobile harbor, in the near sea apart from the quay, a robot arm mooring facility specially devised would be designed and verified through comparison study under various environmental sea condition in the inner and outer harbor. DP system (Dynamic Positioning System) using the azimuth thruster and a pneumatic fender, etc, will be considered as a next research topic for the mooring security of multi-body floaters.

• 한국지능시스템학회논문지
• /
• 제13권6호
• /
• pp.667-672
• /
• 2003

본 논문에서는 불확실성을 포함한 연속시간 비선형 동적 시스템에 대한 퍼지 모델 기반 제어기의 지능형 디지털 재설계를 위한 조직적인 방법을 제안한다. 불확실 비선형 시스템을 표현하기 위해 연속시간 불확실 TS 퍼지 모델이 구성되었다. 안정화와 추적을 위한 퍼지 모델 기반 제어기 설계를 위해 EPDC 기법이 이용되었다. 설계된 연속시간 제어기는 지능형 디지털 재설계 기법을 이용함으로써 이산시간 제어기로 전환되었다. 이 새로운 설계 기법은 퍼지 모델 기반 제어 이론과 불확실성을 가진 비선형 동적 시스템에 대한 진보된 디지털 재설계 기법의 통합을 위한 조직적이고, 효과적인 틀을 제공한다. 마지막으로, 단일 링크 유연 로봇 시스템의 모의 실험을 이용해 개발된 설계 방법의 효용성과 실행 가능성을 입증한다.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.729-735
• /
• 2021

Recently Artificial Intelligence(AI) has been developed and used in various fields. Especially AI recognition technology can perceive and distinguish images so it should plays a significant role in quality inspection process. For stability of autonomous driving technology, semiconductors inside automobiles must be protected from external electromagnetic wave(EM wave). As a shield film, a thin polymeric material with hole shaped micro-patterns created by a laser processing could be used for the protection. The shielding efficiency of the film can be increased by the hole structure with appropriate pitch and size. However, since the sensitivity of micro-machining for some parameters, the shape of every single hole can not be same, even it is possible to make defective patterns during process. And it is absolutely time consuming way to inspect all patterns by just using optical microscope. In this paper, we introduce a AI inspection system which is based on web site AI tool. And we evaluate the usefulness of AI model by calculate Area Under ROC curve(Receiver Operating Characteristics). The AI system can classify the micro-patterns into normal or abnormal ones displaying the text of the result on real-time images and save them as image files respectively. Furthermore, pressing the running button, the Hardware of robot arm with two Arduino motors move the film on the optical microscopy stage in order for raster scanning. So this AI system can inspect the entire micro-patterns of a film automatically. If our system could collect much more identified data, it is believed that this system should be a more precise and accurate process for the efficiency of the AI inspection. Also this one could be applied to image-based inspection process of other products.