• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1413-1419
• /
• 2015

Monopulse RADAR is the radar which detects the range of the target using a single transmitted signal. In this paper, using 9.41GHz X-band radar, the research for the phase comparison monopulse algorithm used in the marine environment is conducted. In addition, by applying the phase comparison monopulse algorithm, we calculate the RMSE for the various antenna spacings and the positions of the target. Based on that result, we compare the performance of the phase comparison monopulse algorithm in the uniform linear array with that in the non-uniform linear array. Finally, the differences in performance among the MUSIC algorithm, Bartlett method and the proposed phase comparison monopulse algorithm are analyzed.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.14-18
• /
• 2020

In this paper, when two sets of cross-eye jammer antennas are installed vertically to jam a monopulse radar, the jamming effects according to the jammer's phase difference, amplitude ratio, and radar angle of engagement are analyzed. The phase difference and amplitude ratio of the cross-eye jammer can be adjusted in the jammer, but since the angle of engagement is relatively determined by the radar, it is very important to respond to changes in the angle of engagement. The orthogonally deployed jammer antennas can be considered as a good way to increase the jamming effect while minimizing the hardware configuration, and the jamming effect is analyzed while changing the angle of inclination from 0° to 360°. This jammer greatly improves the jamming effects at the angles of incidence 45°~135° and 225°~315°, compared to a single jammer. And it is expected to be useful in the design of cross-eye jammers for military aircraft and ships.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.89-95
• /
• 2018

In this paper, we analyze the antenna performance changes caused by the aircraft structure, diffraction and reflection, when the direction finding antenna used in the aircraft is mounted on the aircraft. Direction finding antenna is an antenna that receives radar threat signal in the direction finding device of aircraft electronic warfare system. Recently, because various antenna are mounted on an aircraft, various analyzes such as antenna performance and interference analysis are required. Therefore, the electromagnetic analysis was carried out by installing a broadband direction finding antenna with 50% bandwidth on simulated aircraft, and the direction finding performance was analyzed by comparing the single antenna performance with the performance mounted on the aircraft. The analyzed direction finding accuracy was $6.47^{\circ}$ RMS and predicted to be suitable as an antenna for aircraft direction finding antenna.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.2
• /
• pp.185-192
• /
• 2017

In this paper, we reviewed major design parameters for a solid type of deployable antenna and its structural design. We performed modal analysis for a single reflector panel made of aluminum and CFRP (carbon fiber reinforced plastic) to confirm the appropriateness of selected materials. We then predicted the elastic modulus of CFRP using the principles of unidirectional composite elasticity stiffness predictions such as the ROM (Rule of Mixture) and HSR (Hart Smith 10% Rule). To optimize the shape of the antenna reflector, a structural stiffness analysis was performed using derived numerical optimization factors. Six structural stiffness analyses were performed using the constructed experimental design method. The resulting optimal shape conditions are proposed to meet the structural stiffness requirements while minimizing weight.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.247-250
• /
• 2004

Tracking systems for launch vehicle consist mainly of radar transponder (beacon), RF switch or power divider, antennas as onboard system, and single or multiple radars as ground one. In this paper, tracking systems, which are applicable to KSLV (Korea Space Launch Vehicle)-l, are introduced and the electrical performances for developed prototypes are presented. We have also performed RF link analysis for both uplink and downlink, and estimated that the maximum distance to be able to track KSLV-l stably is dependent on uplink characteristic in our system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.12-22
• /
• 2016

Convenience and safety are the key words for the automotive driving and various sensor technologies have been studied for enhanced perception of driving environments. In frequency modulated continuous wave (FMCW) radar systems, single antenna is enough for range and velocity detection of multiple targets. Multiple array antenna is needed for estimating direction of arrival(DoA). Using DoA estimation algorithm in time domain as in the conventional systems, it is difficult to distinguish vehicles lie in the same angle. In order to facilitate the enhanced angle estimation, DoA estimation algorithm is applied in frequency domain. In this paper, the method for applying multiple signal classification(MUSIC) algorithm in frequency domain is suggested and the performance is analyzed.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.538-541
• /
• 2005

Tidal flats develop along the south coast ofthe Korean peninsula. These areas are famous for sea farming. Specially, strong and coherent radar backscattering signals are observed over oyster sea farms that consist of artificial structures. Tide height in oyster farm is possible to measure by using interferometric phase and intensity of SAR data. It is assumed that the radar signals from oyster farm could be considered as double-bouncing returns by vertical and horizontal bars. But, detailed backscattering mechanism and polarimetric characteristics in oyster farm had not been well studied. We could not demonstrate whether the assumption is correct or not and exactly understand what the properties of back scattering were in oyster farm without full polarimetric data. The results of AIRSAR L-band POLSAR data, experiments in laboratory and JERS-l images are discussed. We carried out an experiment simulating a target structure using vector network analyser (Y.N.A.) in an anechoic chamber at Niigata University. Radar returns from vertical poles are stronger than those from horizontal poles by 10.5 dB. Single bounce components were as strong as double bounce components and more sensitive to antenna look direction. Double bounce components show quasi-linear relation with height of vertical poles. As black absorber replaced AI-plate in bottom surface, double bounce in vertical pole decreased. It is observed that not all oyster farms are characterized by double bounced scattering in AIRSAR data. The image intensity of the double bounce dominant oyster farm was investigated with respect to that of oyster farm dominated by single bounce in JERS-l SAR data. The image intensity model results in a correlation coefficient (R2 ) of 0.78 in double bounce dominant area while that of 0.54 in single bouncing dominant area. This shows that double bounce dominant area should be selected for water height measurement using In8AR technique.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.1-7
• /
• 2004

We have developed a 24GHz side-looking vehicle detection radar. A 24GHz front-end module and a novel signal processing algorithm have been developed for speed measurement and size classification of vehicles in multiple lanes. The system has a fixed antenna and FMCW processing module. This paper presents the background theory of operation and shows some measured data using the algorithm. The data shows that measured velocity of the passing vehicle is within the accuracy of 95% in single lane and the velocity of the vehicles in two lanes is within the accuracy of 90% by using variable threshold estimation. The classification of vehicle size as small, medium and large has been measured with 89% accuracy.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.21-34
• /
• 2017

The ground penetrating radar (GPR) signal can be measured with different amplitudes according to the directivity, so the directivity of the antenna should be considered. The objective of this study is to investigate the directivity of antenna by analyzing the reflection characteristics of electromagnetic waves radiated from the antenna, and to evaluate effective range of angle that can inspect an abnormal area according to the directivity of antenna. For the measurement of the directivity, a circular metal bar is used as reflector and the signals are measured by changing the angle and the distance between reflector and antenna in the E- and H-plane. The boundary distance between the near field and the far field is determined by analyzing the amplitudes of reflected signals, and two points with different distances from each of near and far fields are designated to analyze radiation patterns in near and far fields. As a result of radiation pattern measurement, in the near field, minor lobes are observed at angle section at more than $50^{\circ}$ in both E- and H-plane. Therefore, antenna has the directivity for the direction of main lobe and minor lobes in near field. In the far field, antenna has the directivity for a single direction of main lobe because minor lobes are not observed. The amplitude of the signal reflected from the near field is unstable, but it can be distinguished from noise. Therefore, in the near field, the ground anomaly can be detected with high reliability. On the other hand, the amplitude of the signal reflected from the far field is stable, but it is hard to distinguish between reflected signal and noise because of the excessive loss of electromagnetic wave. The analyses of directivity in the near and the far fields performed in this study may be effectively used to improve the reliability of the analyses of abnormal area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.44-49
• /
• 2001

In this paper, we propose a new technique to compensate for the VCO nonlinearity using only the returned beat signal whose spectrum contains the internal reflections and the targets simultaneously. In the case of a distance measurement system using single antenna, the reflections from the circulator and the antenna are much larger than the return signal from target. The beat signal by these reflections is at much lower frequency than that of the target, and the VCO nonlinearity can be compensated for using these signals. Indoor experiments were carried out and the results show marked improvement in the shape of range profile and the range resolution.