• 제목/요약/키워드: Simultaneous optimization

검색결과 262건 처리시간 0.018초

헬기 탑재용 전자장비의 동특성 분석 절차 (Dynamic Characteristic Analysis Procedure of Helicopter-mounted Electronic Equipment)

  • 이종학;권병현;박노철;박영필
    • 한국소음진동공학회논문집
    • /
    • 제23권8호
    • /
    • pp.759-769
    • /
    • 2013
  • 기동중인 헬리콥터는 공기역학적인 현상에 의하여 발생하는 불규칙 진동과 회전날개의 작동으로 인한 정현파 진동이 합성되어 발생하는 진동, 작업 및 착륙 시 발생하는 충격, 그리고 갑작스런 기동 시 발생하는 가속도와 같은 동적 하중에 노출 된다. 이때 발생하는 진동과 같은 동적 하중은 기체내부로 전달되어 헬리콥터운용에 필요한 전자장비를 가진 한다. 과거에 이러한 현상을 최소화하기 위하여 진동크기 감쇠시키기 위한 완충기를 전자장비의 장착대에 적용하여 왔다. 그러나 헬리콥터의 경우, 저주파에서 정현파 가진이 발생하므로 완충기 적용은 오히려 장착 플레이트 및 전자장비 부품의 파손을 발생시킬 수 있다. 이 연구에서는 완충기를 제거한 장착대를 동적 하중에 강건하며 전자장비에 전달되는 진동크기를 최소화 하도록 설계하였다. 완충기를 제거한 장착 대를 적용 시, 무게와 부피를 획기적으로 줄일 수 있으며 전자장비를 기체에 체결하는 나사 수가 적어짐에 따라 체결작업에 필요한 시간이 감소되는 장점을 갖는다. 최적화 해석에 적용되는 동적 하중을 선정하기 위하여 진동, 충격, 가속도하중을 비교 분석하여 가장 결정적인 동적 하중인 진동에 의한 하중을 선정하였다. 전체모델 유한요소 해석을 통하여 전자장비의 동적 거동을 분석하고 최적화 해석에 필요한 단순화 모델을 구축하였으며, 모달 테스트를 통해서 동특성을 검증하였다. 위상 최적화를 적용하여 강성대비 체적비가 큰 장착대의 형상을 도출한 후 고유진동수, 응력을 제약조건으로 무게가 최소화 되도록 하는 파라미터 최적화를 수행하여 장착대의 최종 형상 및 치수를 결정하였다. 개선모델은 체적 및 질량이 약 13 % 감소하였으며 사용시간은 규격대비 9.2배 증가하였다. 마지막으로 최적화된 장착대를 운용중인 실제 장비에 적용하여 진동환경에 대한 안정성을 평가하였다.

설비공학 분야의 최근 연구 동향: 2008년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2008)

  • 한화택;최창호;이대영;김서영;권용일;최종민
    • 설비공학논문집
    • /
    • 제21권12호
    • /
    • pp.715-732
    • /
    • 2009
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.