• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2662-2669
• /
• 2023

For the precise measurements of special nuclear materials (SNM) including Pu and Am isotopes, we have used phoswich detector combination of two single crystal scintillators of Gd₃Ga₃Al₂O₁₂:Ce and CsI:Tl. High detection efficiency and sensitivity along with high figure of merit for the discrimination of these phoswich detectors ensures the detection and discrimination of thermal neutrons and gammas from spontaneous fission of Pu and other isotopes in presence of high gamma background. Using this detector, the low energy gammas, which is stopped completely in 1mm thick disc of GGAG, can be also discriminated from high energies gamma and shows linearity in wide range of sample quantities. By changing only the appropriate shielding, the similar setup was used for thermal neutron detection and shows a very good linearity over wide range. The quantity of a test sample was also calculated accurately by using the measured calibrated plot.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.86-97
• /
• 2012

Ground vibration induced by a bench blasting in the construction site should cause the damage to the structure and indirect damage to a human body, and the vibration level is most practical descriptor for regulating the damage to human body and peak particle velocity is the descriptor for direct damage assesment of the structure. Meantime, the vibration level has not been considered for the blasting design but this study is the case that apply not only peak particle velocity but also vibration level on the blasting design. Also, we strongly believe that this study will be helpful for the management in the blasting site which some civil appeal is concerned. Total 232 measurements of both ppv and vibration level was used to estimate the scale distance. When the regulating threshold was ppv 0.3 cm/s and vibration level 75 decibel, the charge per delay to be estimated with vibration level could be recommended by 1.2~1.4 times than it of ppv. So, it is proven that considering vibration level on the blasting design is reasonable for not only prevention of the civil appeals but also effective blasting. Again, the blasting design which follows the law, "Noise and Vibration Control Act" can actually serve good condition to carry much more economical and effective blasting. The instruments used for this study are the SV-1 model, as first instrument in korea which can measure vibration velocity and vibration level at the same time.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.3
• /
• pp.214-220
• /
• 2014

The aim of this study is to optimize the efficiency of a photobiorector on the growth rate of Chlorella vulgaris (C. vulgaris) by varying distance of optical panel (OP). The round shaped C. vulgaris (FC-16) having the size of $3-8{\mu}m$ is employed in this study. The cells of C. vulgaris are cultured in the Jaworski's Medium with deionized water at $22^{\circ}C$ for 15 days. The OP is placed at four different distances i.e., at 225 mm distance (Run 1), 150 mm distance (Run 2), 112.5 mm distance (Run 3) and 90 mm distance (Run 4) having a LED (Light Emitting Diode) source. The diffuse rate is achieved to 86%, 90%, 92% and 94% for Run 1, Run 2 Run 3 and Run 4, respectively. A narrower distance of OP caused to effectively to increase the efficiency of diffuse light rate. For mass cultivation of this biomass, medium is changed according to distance of OP after attaining a maximum biomass concentration; Run 1 in 8 days, Run 2 in 6 days, Run 3 in 4 days and Run 4 in 3 days. In addition, the amount of maximum biomass rate for Run 4 was reached 3 times higher than that of Run1. However, growth rate, chlorophyll per cell, cell volume and doubling time are found to be Run 3 and Run 4 higher than that of Run 1 and Run 2 samples. However, Run 3 and Run 4 are having a slight difference in all these measurements. These findings suggest that in terms of economic consideration and efficiency towards simultaneous mass cultivation of biomass, Run 3 was found to be more effective than other samples.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.21-31
• /
• 2015

The Journal of Digital Policy & Management. This space is for the abstract of your study in English. Recently, advancements in voice recognition technology lead to a new oral cultural era. Text based on new oral cultures, can bring about a cultural revolution. This research is rooted within the humanistic approach, including oral and text. The goal of the research is the humanistic measurements in regards to these cultural issues. Just like the complementary relationship between oral and text for the future. First of all, we will discuss the aspects that have resulted in the change between a text culture to an oral culture. After checking these changes with regards to voice recognition technology, we will be able to discuss the possibilities and problems of this cultural change. We discussed expected outcomes, such as the complementarity of speaking and writing, the expansion from the private culture to the public culture, the possibilities of a simultaneous concurrency. We also discussed the necessity such as a new semiotic approach of the voice and preparation for the expansion of the world of life. Specifically, the necessity for the advancement and control of the Korean culture against the dominance of a global corporation will be explored. In this study, basic research will be undertaken to look at the possibility of the new voice recognition technology and cultural changes, that are expected to be able to be effectively utilized and continue into more detailed research.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.369-377
• /
• 1982

The technique of combined-measurement of reflectance and ellipsometric parameters was used for studying the anodic film formed on nickel surface in basic solutions. An ellipsometer was automated for transient measurements by way of modulating the plane-polarized light with the Faraday effect. Surface film was formed electrochemically by applying a potential step from the reduction potential range to the passivation range on a polished, high-purity, polycrystalline nickel specimen. From that instant, the changes in the reflectance(r) and the ellipsometric parameters(${\Delta},{\Psi}$) of the surface film were recorded by the automatic ellipsometer. Three exact simultaneous equations including these optical signals, ${\Delta},{\Psi}$ and r were solved numerically with a computer in order to determine the optical properties, n, k, and the thickness, ${\tau}$, of the surface film. From the computed results which showed dependence on pH and time, it was found that passivation of nickel can be effectively attained by surface film thinner than $15{\AA}$ and this passivation film has a small optical absorption coefficient. It seemed that a high pH environment enhances the rate of passivation and is favorable for a denser structure of the surface film. The experimental evidence is in accordance with the hypothesis that the composition of the passive film can be approximated by $Ni(OH)_2$ in the early stage of passivation and that as time passes the composition changes partially toward that of NiO through dehydration.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.209-229
• /
• 2001

Simultaneous field measurements of short-period and long-period waves were made at five stations inside or outside Okkye Harbor, which is located in the east coast of Korea. Based on the measured data, spacial and temporal variations of the long-period wave energy were examined. Three smoothing methods were examined for the spectral estimates: fixed interval averaging method, incremental interval averaging method, and moving averaging method. It was shown that a proper smoothing method should be chosen depending on the period of first resonant mode and the length of data being used. By comparing the results obtained using the long-term data with those obtained using two-day data, we showed that it is necessary to analyze the data of calm seas and storm seas separately. The Helmholtz resonant period in Okkye Harbor was found to be about 9.6 minutes with its relative amplification ratio of 9 to 10, and local amplifications were apparent at the periods of 1.2 to 1.3 minutes and 0.7 minute. During calm seas, both at the harbor entrance and inside the harbor the energy of the waves of 9 minutes or longer period was larger than the infra-gravity wave energy by more than 100 times. However, during storm seas the energy level was very high all over the period band, and local amplification was larger than that during calm seas by more than 100 times, especially inside the harbor, Finally it was shown that the energies of the Helmholtz resonant mode and the infra-gravity waves of 1 to 2 minutes are proportional to the storm wave height.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.9 no.1
• /
• pp.112-124
• /
• 2005

Background: PWV is determined by dividing the distance by the time taken for the pulses traveling between two measuring sites, used as a marker of arterial stiffness and an important indicator for cardiovascular disease. Methods: A PWV measurement system, which offers a non-invasive, simple method of measurement, and simultaneous recording of six signlas(ECG, PCG and four pulse waves from carotid, femoral, radial and dorsalis pedis arteries) was developed. Seventeen healthy subjects with a mean age of 33 years(22 to 52) without any cardiovascular disease were participated for the experiment. Two observers(A and B) performed two consecutive measurements from the same subject in a random order. For the evaluation of stability and accuracy of the PWV measurement system, reproducibility of PWV from between-observer were also evaluated. Results: PWV $values(Mean{\pm}SD)$ measured by A were $7.07{\pm}1.48m/s$, $8.43{\pm}1.14m/s$ , $8.09{\pm}0.98m/s$ for aorta, arm, and leg, respectively. The values obtained from B were $6.76{\pm}1.00m/s$, $7.97{\pm}0.80m/s$, and $7.97{\pm}0.72m/s$ for aorta, arm, and leg, respectively. Between-observer $differences(mean{\pm}SEM)$ from the aorta, arm and leg were $0.14{\pm}0.15m/s$, $0.18{\pm}0.10m/s$ and $0.07{\pm}0.10m/s$. Reproducibility coefficients(2SD) from the aorta, arm, and leg were 0.62m/s, 0.84m/s and 0.86m/s. Correlation coefficients were significantly higher in aortic PWV, 0.93, compared to the coefficients for arm and leg. Coefficient of variance which reflects the reproducibility of the system ranged from $4.4{\sim}5.8%$ in all regional PWV. , Conclusion: Reproducibility of PWV in the study shows that the developed system has reliable and reproducible characteristics. The PWV measurement system used for the study offers comfortable and simple operation and provides accurate analysis and results with high reproducibility. Results of the PWV measurement system could contribute to various clinical applications in the future.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.293-301
• /
• 2010

Optical fiber cable, as a sensor, was installed on the wall of KAERI(Korea Atomic Energy Research Institute) Underground Research Tunnel(KURT) in order to monitor the physical stability of the tunnel, which was constructed for technical development and demonstration of radioactive waste disposal. This monitoring system has two simultaneous measurements of temperature and strain over time using Brillouin backscatter. According to the results of the monitoring from Jan. 2008 to Nov. 2009, there is no significant displacement or movement at the tunnel wall However, the cumulative volume of total strain increased slightly as time passes with the comparison of the reference observation, which was measured in Jan. 2008. The change in cumulative volume of total strain indicates that the strain level had been affected by saturation and de-saturation phenomena due to groundwater fluctuation at several points at KURT. This system is based on the distributed sensing technique concept, not point sensing. By using this system, a displacement can be detected with the range from $20{\mu}{\varepsilon}$ to $28,000{\mu}{\varepsilon}$ every 1m interval in minimum. A temperature variation can be monitored at every 0.5m interval with the resolution of 0.01 in minimum. Based on the study, this monitoring system is potentially applicable to long term monitoring systems for radioactive waste disposal project as well as other structures and underground openings.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.133-138
• /
• 2000

We have investigated some crystallographic, magnetic, and transport properties of the first colossal magnetoresistive compounds $La_{1-x}Ba_{x}MnO_3(0\leq\chi\leq$1)$(5\;K\leqT\leq360K,-5T\leqH\leq5T$ and resistivity $(100K\leqT\leq350K$measurements. $La_{1-x}Ba_{x}MnO_3$ were found to be ferromagnetic for all x.The $La_{1-x}Ba_{x}MnO_3$were found to be insulating for x< 0.2, metallic for 0.20.5. The magnitude of saturation magnetization (Ms) increased until x=1/8 and had theoretical maximum Ms for 0.13$\sfrac{3}{8}$ and had a constant value of 335~340 K for x>$\sfrac{3}{8}$. For $x\geq0.5$ the $La_{1-x}Ba_{x}MnO_3$ samples showed a percolation-type conduction behavior and enhanced low field magnetoresistance caused by simultaneous occurrence of the chemical/magnetic phase separation.