• Journal of the Korea Society for Simulation
• /
• v.12 no.2
• /
• pp.45-53
• /
• 2003

This paper presents a retargetable compiled assembly simulation technique for fast ASIP(application specific instruction processor) simulation. Development of ASIP which satisfies design requirements in various fields of applications such as telecommunication, wireless network, etc. needs formal design methodology and high-performance relevant software environments such as compiler and simulator In this paper, we employ the architecture description language(ADL) named ${HiXR}^2$ to automatically synthesize an instruction-level compiled assembly simulator. A compiled simulation has benefit of time efficiency to interpretive one because it performs instruction fetching and decoding at compile time. Especially, in case of assembly simulation, instruction decoding is usually a time-consuming job(string operation), so the compiled simulation of assembly simulation is more efficient than that of binary simulation. Performance improvement of the compiled assembly simulation based on ${HiXR}^2$ is exemplified with an ARM9 architecture and a CalmRISC32 architecture. As a result, the compiled simulation is about 150 times faster than interpretive one.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1903-1909
• /
• 1989

In this paper, the mobile communication CH simulator is implemented in the baseband, using the Digital Signal Processor(TMS320C25), A/D and D/A converters. The Rayleigh CH is modeled by shaping the random noise source power spectrum. The statistical characteristics(Level Crossing Rate, Cumulative distribution Function, Probability Density Function) and the received fading signal's power's spectrum is observed when the doppler frequency is varied according to the variation of the vehicular velocity at the 222MHz band. And also the BER is measured when the baseband mobile CH simulator is applied to the GMSK(Gaussian Minimum Shift Keying` transmission rate: 16kbps, Bb T=0.25) modulator. The results shows the similar characteristics to be compared with the theoritically derived BER values of the discriminator type GMSK detection.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.608-615
• /
• 2008

Recently, research on GNSS signal receiver, aiding system and integrated navigation system approaching to the new satellite navigation system is needed. It it necessary to develop the GNSS simulator not only to understand the new satellite navigation system but also to develop the core technology about the system. In this paper, the simulator of the GPS and Galileo satellite nagivation is developed in IF(intermediate frequency) signal level.

• Progress in Medical Physics
• /
• v.30 no.4
• /
• pp.160-166
• /
• 2019

This study examined the clinical use of two newly installed computed tomography (CT) simulators in the Department of Radiation Oncology. The accreditation procedure was performed by the Korean Institute for Accreditation of Medical Imaging. An Xi R/F dosimeter was used to measure the CT dose index for each plug of the CT dose index phantom. Image qualities such as the Hounsfield unit (HU) value of water, noise level, homogeneity, existence of artifacts, spatial resolution, contrast, and slice thickness were evaluated by scanning a CT performance phantom. All test items were evaluated as to whether they were within the required tolerance level. CT calibration curves-the relationship between CT number and relative electron density-were obtained for dose calculations in the treatment planning system. The positional accuracy of the lasers was also evaluated. The volume CT dose indices for the head phantom were 22.26 mGy and 23.70 mGy, and those for body phantom were 12.30 mGy and 12.99 mGy for the first and second CT simulators, respectively. HU accuracy, noise, and homogeneity for the first CT simulator were -0.2 HU, 4.9 HU, and 0.69 HU, respectively, while those for second CT simulator were 1.9 HU, 4.9 HU, and 0.70 HU, respectively. Five air-filled holes with a diameter of 1.00 mm were used for assessment of spatial resolution and a low contrast object with a diameter of 6.4 mm was clearly discernible by both CT scanners. Both CT simulators exhibited comparable performance and are acceptable for clinical use.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.162-170
• /
• 2004

In these days, a vehicle simulator is developed by using a VR(Virtual Reality) system. A VR system must provide a vehicle simulator with a natural interaction, a sufficient immersion and realistic images. To achieve this, it is important to provide a fast and uniform rendering performance regardless of the complexity of virtual worlds or the level of simulation. In this paper, modeling methods which offer an improved rendering performance for complex VR applications as 3D road model have been implemented and verified. The key idea of the methods is to reduce a load of VR system by means of LOD(Level of Detail), alpha blending texture mapping, texture mip-mapping and bilboard. Hence, in 3D road model where a simulation is complex or a scene is very large, the methods can provide uniform and acceptable frame rates. The VR system which is constructed with the methods has been experimented under the various application environments. It is confirmed that the proposed methods are effective and adequate to the VR system which associates with a vehicle simulator.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.153-159
• /
• 1989

This paper describes the algorithms employed in the preprocessing stage of the timing simulator, TSIM1.0, which is based on the Waveform Relaxation Method (WRM) at the CELL-level. The preprocessing stage in TSIM1.0 (1)partitions a given circuit into DC connected blocks (DCB's) (2) forms strongly connected circuts (SCC's) and (3) orders CELL's Also, the efficient waveform management technique for the WRM is described, which allows the overwriting of the waveform management technique for the WRM is described. which allows the overwriting of the waveform information to save the storage requirements. With TSIM1.0, circuits containing up to 5000 MOSFET's can be analyzed within 1 hour computation time on the IBM PC/AT. The simulation results for several types of MOS digital circuits are given to verify the performance of TSIM1.0.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.5
• /
• pp.37-42
• /
• 2014

The objective of this study is the frequency of the noise source 170 dB level of impulsive sound attenuation performance by earplugs to identify, to analyze the frequency characteristics of a shape and pattern. The attenuation performance of the impulsive noise by the frequency levels on the Combat Arm and 3M Form types 1100 Earplugs were evaluated. In order to check the sound attenuation performance of the B&K head and torso simulator and sound attenuation performance of the ear simulator data was verified. Previous studies have most impact, even in the noise source and the impulse noise level is 140 dB, but this study is higher than that of the impulsive noise source features. The results of the impulse noise attenuation effect is frequency-dependent mean 28.58 dB.

• Structural Engineering and Mechanics
• /
• v.61 no.2
• /
• pp.267-274
• /
• 2017

In this study was investigated of possibility using the recorded micro tremor data on ground level as ambient vibration input excitation data for investigation and application Operational Modal Analysis (OMA) on the bench-scale earthquake simulator (The Quanser Shake Table) for model steel structures. As known OMA methods (such as EFDD, SSI and so on) are supposed to deal with the ambient responses. For this purpose, analytical and experimental modal analysis of a model steel structure for dynamic characteristics was evaluated. 3D Finite element model of the building was evaluated for the model steel structure based on the design drawing. Ambient excitation was provided by shake table from the recorded micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition is used for the output only modal identification. From this study, best correlation is found between mode shapes. Natural frequencies and analytical frequencies in average (only) 2.8% are differences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.3
• /
• pp.158-160
• /
• 2014

Recently, owing to the development of active array antenna techniques, various sector beams can be applied to the LTE systems with vertical sectorization. In this paper, we evaluate the system performance and suggest an optimum beam combination and parameters by using a system level simulator

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.57-68
• /
• 1999

The purpose of this study is to build a description technique and to make a simulator, which can simulate and verify the behavior of gate level digital system. To get the object code from the input description language, we build a translator. To do this, we used YACC of the UNIX parser generator. and made an intermediate code in the mid-process between translator and simulator to extend the range of application. For experimental models. we used the Full-Adder and Modulo-3 Counter.