• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• 제13권1호
• /
• pp.48-53
• /
• 2017

We diagnosed the defect using the data obtained from the nuclear power plant simulator. In this paper, we diagnosed faults in the nuclear power plant system for discovery instead of the traditional single-component or device unit. We created the six fault scenarios and used a fault simulator to obtain the fault data. It was extracted pattern from acquired failure data. Neural network model was trained and simple pattern matching algorithm was applied. We presented a simulation result and confirmed that the applied algorithm works correctly.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제14권5호
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제60권5호
• /
• pp.1017-1022
• /
• 2011

This paper describes the improvement of the calculation by using $6{\sigma}$ method on steam turbine simulator in a nuclear power plant. The simulator is essential to not only verification and validation of control logic but also making sure of control constants in upgrading the long time used control system into the new one. And the dynamic model is a key point in that simulator. The model used during the retrofit period of the turbine controller in Kori Nuclear Power Plant makes difference in calculating generator output and control valve positions. That is because such operating data as the main steam pressure, the main steam temperature and control valve positions of Yongkwang #3 are different from those of Kori #4. Therefore, the model parameters must be tuned by using actual operating data for the high fidelity of simulator in calculating the dynamic characteristic of the model. This paper describes that the $6{\sigma}$ method is used in improvement of precision of generator output calculation in the steam turbine model of the simulator.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.375-383
• /
• 2011

This paper describes a real-time hardware simulator for a grid-tied Permanent Magnet Synchronous Generator (PMSG) wind power system, which consists of an anemometer, a data logger, a motor-generator set with vector drive, and a back-to-back power converter with a digital signal processor (DSP) controller. The anemometer measures real wind speed, and the data is sent to the data logger to calculate the turbine torque. The calculated torque is sent to the vector drive for the induction motor after it is scaled down to the rated simulator power. The motor generates the mechanical power for the PMSG, and the generated electrical power is connected to the grid through a back-to-back converter. The generator-side converter in a back-to-back converter operates in current control mode to track the maximum power point at the given wind speed. The grid-side converter operates to control the direct current link voltage and to correct the power factor. The developed simulator can be used to analyze various mechanical and electrical characteristics of a grid-tied PMSG wind power system. It can also be utilized to educate students or engineers on the operation of grid-tied PMSG wind power system.

• Journal of the Korean Institute of Intelligent Systems
• /
• 제23권3호
• /
• pp.220-225
• /
• 2013

Accidents between ships occur frequently at the traffic congestion area. Once a maritime accidents occur, it is likely to end up with critical damaged accidents. This paper develop a simulator for assessing quantitative risk based on statical maritime traffic data and realtime traffic distribution. Ship's passage risk assessment simulator consist of import of division of passage data, traffic distribution analysis and passage risk assessment analysis. Maritime traffic data of WANDO waterway apply to simulator for calculation of quantitative risk rate of waterway.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.3-7
• /
• 2005

Recently, vehicle simulators are widely used to evaluate driver s responses and driver assistance systems. It needs much effort to construct the virtual driving environment for a vehicle simulator. In this study, it is described how to make effectively the roads and the driving environment for a vehicle simulator. GIS (Geographic Information System) is used to construct the roads and the environment effectively. Because the GIS is the integrated system of geographical data, it contains useful data to make virtual driving environment. First, boundaries and centerlines of roads are extracted from the GIS. From boundaries, the road width is calculated. Using centerlines, mesh models of roads are constructed. The final graphic model of roads is constructed by mapping road images to those mesh models considering the number of lanes and the kind of surface. Data of buildings from the GIS are extracted. Each shape and height of building is determined considering the kind of building to construct the final graphic model of buildings. Then, the graphic model of roadside trees is constructed to decide their locations. Finally, the driving environment for driving simulator is constructed by converting the three graphic models with the graphic format of Direct-X and by joining the three graphic models.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.659-665
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported. This paper presents a Train Communication Network simulator(TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. TCN of fieldbus was adopted as international standardization IEC 61375 in 1999. It has been operating on G7 train in korea. This paper developed TCNS(Train Communication Network simulator) as a simulator for performance evaluation. We can verify TCNS for preventing many kinds of occurring problems between the devices in data-communication. This study was developed TCNS as a simulator for the performance evaluation. We analyzed correlation between token, transmission data per paket and transmission speed of bus, through the TCNS, also analyzed result according to error rate of TCN. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.518-521
• /
• 1993

AS THE POWER SYSTEM BECOMES LARGER AND MORE COMPLICATED, THE NUMBER OF UNEXPLAINABLE FAULTS IS INCREASING. IN ORDER TO EXPLAIN THESE FAULTS, NUMEROUS AND VARIOUS DATA ARE NEEDED. BUT THESE DATA ARE NOT READILY AVAILABLE FROM THE FIELD TEST, SO SHOULD BE OBTAINED FROM THE SIMULATOR WHICH CAN SIMULATE THE POWER SYSTEM EXACTLY AND EASILY. IN THIS PAPER, A DIGITAL SIMULATOR WHICH IS APPROPRIATE FOR THIS PURPOSE IS DEVELOPED. THIS SIMULATOR IS DIVIDED INTO THREE PARTS : DIGITAL SIMULATION PART, D/A CONVERSION AND CONTROL PART AND AMPLIFIER PART. AND, THE FUNCTION OF THE SIMULATOR AND THE FUTURE RESEARCH AREA ARE DISCUSSED.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.948-953
• /
• 2004

For stable walking of various biped walking robots(BWR), we need to know the kinematics, dynamics and the Zero Moment of Point(ZMP) which are not easy to analyze analytically. In this reason, we developed a simulation program for BWRs composed of 4 degree-of-freedom upper-part body and 12 degree-of-freedom lower-part of the body. To operate the motion simulator for analyzing the kinematics and dynamics of BWES, inputs for the distance between legs, base angle, choice of walking type, gaits, and walking velocity are necessary. As a result, if stability condition is satisfied by the simulation, angle data for each actuator are generated automatically, and the data are transmitted to BWRS and then, they are actuated by the motion data. Finally, we validate the performance of the proposed motion simulator by applying it to a constructed small sized BWR.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.120-122
• /
• 2004

This paper describes the digital relay simulator by use of DSP for digital relay test. The simulator software has EMTP simulation data file conversion. user define simulation data generation. data analysis engine. etc. The simulator hardware design uses 32bit floating point DSP architecture to achivev flexibility and high speed operation.