• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1505-1510
• /
• 2014

High-Pass (ETC ; Electronic Toll Collection) system is one of the basic elements, which adopts a wireless communication method using 5.8 GHz and can realize a part of ITS (Intelligent Traffic System). On the other hand, communication errors occur frequently in Hi-Pass system due to signal erros, multi-path reflection, and/or system-to-system interferences. To solve these problems, an EM (Electro-Magnetic) wave absorber can be used. To solve these Problems, we fabricated some samples in the different composition ratios of Carbon, Sendust, and CPE, and it was confirmed that the optimum composition ratio of Carbon : Sendust : CPE is 10 : 40 : 50 wt.%. The complex relative permittivity and complex relative permeability were derived by using the measured data. In addition, the optimum design parameters for the absorber were determined by simulation. Then the absorption abilities were calculated by changing the thickness of the EM wave absorbers. As a result, the optimum thickness of the developed EM wave absorber was 2.85 mm with absorption ability over 22.4 dB at 5.8 GHz. Futhermore, the EM wave absorber was fabricated based on the simulated and designed values. The measured values agreed well with the simulated ones. Therefore, it was clearly shown that the developed EM wave absorber in this paper is to be applied in actual situations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1927-1934
• /
• 2016

In this paper, we proposed a I-gate n-MOSFET (n-type Metal Oxide Semiconductors Field Effect Transistor) structure in order to mitigate a radiation-induced leakage current path in an isolation oxide interface of a silicon-based standard n-MOSFET. The proposed I-gate n-MOSFET structure was designed by using a layout modification technology in the standard 0.18um CMOS (Complementary Metal Oxide Semiconductor) process, this structure supplements the structural drawbacks of conventional radiation-tolerant electronic device using layout modification technology such as an ELT (Enclosed Layout Transistor) and a DGA (Dummy Gate-Assisted) n-MOSFET. Thus, in comparison with the conventional structures, it can ensure expandability of a circuit design in a semiconductor-chip fabrication. Also for verification of a radiation-tolerant characteristic, we carried out M&S (Modeling and Simulation) using TCAD 3D (Technology Computer Aided Design 3-dimension) tool. As a results, we had confirmed the radiation-tolerant characteristic of the I-gate n-MOSFET structure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.505-508
• /
• 2016

In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace lines with high power impulse injection. Our proposed method uses to trace lines with very small power high frequency signal injection. Simulation models for 3-phase power transformers, 3-phase wire lines, and customer loads are described to investigate the transmission characteristics of high frequency power line carrier. Distribution lines have only a limited ability to carry higher frequencies. Typically power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.943-954
• /
• 2003

The mobile telecommunication system has been growing exponentially after 1990s due to the high population in a city and the growth of mobile user. In this time, the current mobile system mainly concentrates on the voice communication. However, in the next generation, mobile users want to get very diverse services via mobile terminal such as the Internet access, web access, multimedia communication, and etc. For this reason, the next generation system, such as the UMTS (Universal Mobile Telecommunication Services) system, has to support the packet data service and it will play the major role in the system. By the way, since the Web service is based on TCP, most of the Internet traffic TCP traffic. Therefore, efficient transmission of TCP traffic will take very important role in the performance of packet data service. There are many researches about improving TCP performance over wireless network. In those schemes, the UMTS system adapts the link layer retransmission scheme. However, there are rarely studies about the exact performance of the link layer retransmission scheme in the face of dynamic changes of wireless environment over the UMTS system. The dynamic changes of wireless environment, such as wireless bandwidth, can degrade TCP performance directly. So, in this paper, we simulate and analyze the TCP performance in the UMTS system with dynamic wireless environments. Then, we propose a simple scheme for minimizing TCP performance degradation. As a result of simulation, we can find that when wireless environment is changed dynamically, the probability of TCP timeout is increased, and the TCP performance is degraded very much. In this situation, the proposed simple scheme shows good performance. It saves wireless resources and reduces the degradation of TCP performance without large overhead of the base station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2026-2034
• /
• 2015

Wireless sensor networks (WSNs) consist of a lot of sensor nodes having limited transmission range. So multi-hop transmission is used for communication among nodes but the multi-hop transmission degrade the end-to-end reliability. Multipath routing and opportunistic routing are typical approaches for guaranteeing end-to-end reliability in WSNs. The existing protocols improve the reliability effectively in small networks but they suffer from rapid performance degradation in large networks. In this paper, we propose the opportunistic multipath routing protocol for guaranteeing end-to-end reliability in large WSNs. Applying multipath routing and opportunistic routing simultaneously is very hard because their conflicting routing features. The proposed protocol applies these approaches simultaneously by section-based routing thereby enhancing end-to-end reliability. Additionally, the proposed protocol guarantees required reliability by the concept of section reliability. The section reliability over a certain level might satisfy required end-to-end reliability. Our simulation results show that the proposed protocol is more suitable for guaranteeing reliability than existing protocols in large-scale WSNs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.476-482
• /
• 2012

In this paper, we analyze and compare several co-channel interference mitigation algorithms for WBAN application in 2.4 GHz ISM frequency bands. ML (Maximum Likelihood), OC (Optimal Combining) and MMSE (Minimum Mean Square Error) has been considered for the possible techniques for interference cancellation in view of the trade off between the performance and the complexity of implementation. Based on the channel model of IEEE 802.15.6 standard, simulation results show that ML and OC attains the lower BER performance than that of MMSE if we assume the perfect channel estimation. But, ML and OC have the additional requirement of implementation for his own and other users's channel estimation process, hence, besides the BER performance, the complexity of implementation and the sensitivity to channel estimation error should be considered since it requires the simple and small sized equipment for WBAN system application. In addition, the gap of detection BER performance between ML, OC and MMSE is much decreased under the imperfect channel estimation if we adopt real channel estimation process, therefore, in order to apply to WBAN system, the trade off between the BER performance and complexity of implemetation should be seriously considered to decide the best co-channel interference cancellation for WBAN system application.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.63-72
• /
• 2007

This paper introduces a load-balancing algorithm focusing on distributing web requests evenly into the web cluster servers. The load-balancing algorithms based on conventional periodic load-information update mechanism are not suitable for dynamic page applications, which are common in Cyber Foraging services, due to the problems caused by periodic synchronized load-information updating and the difficulties of work load estimation caused by embedded executing scripts of dynamic pages. Update-on-Finish algorithm solves this problem by using non-periodic load-update mechanism, and the web switch knows the servers' real load information only after their reporting and then distributes new loads according to the new load-information table, however it results in much communication overhead. Our proposed mechanism improve update-on-finish algorithm by using K-Percents-Finish mechanism and thus largely reduce the communication overhead. Furthermore, we consider the different capabilities of servers with a threshold Ti value and propose a load-balancing algorithm for servers with various capabilities. Simulation results show that the proposed K-Percents-Finish Reporting mechanism can at least reduce 50% communication overhead than update-on-finish approach while sustaining better load balancing performance than periodic mechanisms in related work.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.51-56
• /
• 2009

Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.155-187
• /
• 1992

The Korean economy has sustained high growth rate for almost three decades, that have been associated with the rapid expansion of manufacturing industries. In the beginning stage of development, the high growth of the Korean economy has been based on improvements in productivity obtained by the economies of scale. In that period, the improvements in productivity could be secured by the economies of scale in the export-oriented industries which are the labor- and material-intensive industries. In the latter half of the 1980s, the Korean economy went through rapid transition. Now Korea is at another juncture in its development process, where economic restructuring is critical to sustain high growth. However, economic restructuring in the 1990s call for much more concerted effort than before, since changes in internal and external conditions have profoundly altered the environment for economic development. If Korea is to sustain high growth in the 1990s, it has to promote balanced economic and social development in coordination with the smooth facilitation of industrial restructuring. There are no inherent conflicts among the issues involved, so they can be resolved by restructuring the economy to facilitate, in a global context, the development of knowledge- and technology-intensive activities and to ensure that the benefts of growth are reflected of qualitative improvements in national living standards. In this paper, we examined a scenario of structural changes using a mid- and long-term multisector model, in order to understand the conditions needed for realizing the growth potential. This examination explains the important features of the development course and policy directions that will help sustain high growth in the 1990s.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.325-340
• /
• 2001

This research is to construct more useful Geo-spatial data by building spatial data to three dimensional and utilize the database effectively for development of application, maintenance and management program, and application technology, which is on going based on “Haeundae three dimensional database construction project”. Furthermore, the acquisition of geographic information data and the technological improvement of effective construction would be the important factors to judge the qualitative reputation of GIS. Above all, studies to create accurate data and overcome the error limitation are much more important than any other thing. Final form of Spatial Data to materialize efficient GIS(Geographic Information System) must be three dimensional spatial data which has attribute data, actual concept and numerical value of real world. In connection to that, development is on the move to improve building technique of useful spatial data and digitalize the entire country in cryberspace. $\ulcorner the cyber country lrcorner$is designed to mange the entire country systematically. This simulation would be able to cover administration of government institution, public service, corporate business and even the public life in the cyeberspace though the computer. Materialization of efficient GIS and establishment of condition as technically strong nation through the early realization of $\ulcorner the cyber country lrcorner$will provide a great opportunity to open up the global market with exportation of advanced technology.