• Journal of Radiation Protection and Research
• /
• 제48권4호
• /
• pp.167-174
• /
• 2023

Background: A nondestructive test is commonly used to inspect the surface defects and internal structure of an object without any physical damage. X-rays generated from an electron accelerator or a tube are one of the methods used for nondestructive testing. The high penetration of X-rays through materials with low atomic numbers makes it difficult to discriminate between these materials using X-ray imaging. The interaction characteristics of neutrons with materials can supplement the limitations of X-ray imaging in material discrimination. Materials and Methods: The radiation image acquisition process for air-cargo security inspection equipment using X-rays and neutrons was simulated using a GEometry ANd Tracking (Geant4) simulation toolkit. Radiation images of phantoms composed of 13 materials were obtained, and the R-value, representing the attenuation ratio of neutrons and gamma rays in a material, was calculated from these images. Results and Discussion: The R-values were calculated from the simulated X-ray and neutron images for each phantom and compared with those obtained in the experiments. The R-values obtained from the experiments were higher than those obtained from the simulations. The difference can be due to the following two causes. The first reason is that there are various facilities or equipment in the experimental environment that scatter neutrons, unlike the simulation. The other is the difference in the neutron signal processing. In the simulation, the neutron signal is the sum of the number of neutrons entering the detector. However, in the experiment, the neutron signal was obtained by superimposing the intensities of the neutron signals. Neutron detectors also detect gamma rays, and the neutron signal cannot be clearly distinguished in the process of separating the two types of radiation. Despite these differences, the two results showed similar trends and the viability of using simulation-based radiation images, particularly in the field of security screening. With further research, the simulation-based radiation images can replace ones from experiments and be used in the related fields. Conclusion: The Korea Atomic Energy Research Institute has developed air-cargo security inspection equipment using neutrons and X-rays. Using this equipment, radiation images and R-values for various materials were obtained. The equipment was reconstructed, and the R-values were obtained for 13 materials using the Geant4 simulation toolkit. The R-values calculated by experiment and simulation show similar trends. Therefore, we confirmed the feasibility of using the simulation-based radiation image.

• 한국전기전자재료학회논문지
• /
• 제31권6호
• /
• pp.377-385
• /
• 2018

For the investigation of dopant profiles in implanted $Si_{1-x}Ge_x$, the implanted B and As profiles are measured using SIMS (secondary ion mass spectrometry). The fundamental ion-solid interactions of implantation in $Si_{1-x}Ge_x$ are discussed and explained using SRIM, UT-marlowe, and T-dyn programs. The annealed simulation profiles are also analyzed and compared with experimental data. In comparison with the SIMS data, the boron simulation results show 8% deviations of $R_p$ and 1.8% deviations of ${\Delta}R_p$ owing to relatively small lattice strain and relaxation on the sample surface. In comparison with the SIMS data, the simulation results show 4.7% deviations of $R_p$ and 8.1% deviations of ${\Delta}R_p$ in the arsenic implanted $Si_{0.2}Ge_{0.8}$ layer and 8.5% deviations of $R_p$ and 38% deviations of ${\Delta}R_p$ in the $Si_{0.5}Ge_{0.5}$ layer. An analytical method for obtaining the dopant profile is proposed and also compared with experimental and simulation data herein. For the high-speed CMOSFET (complementary metal oxide semiconductor field effect transistor) and HBT (heterojunction bipolar transistor), the study of dopant profiles in the $Si_{1-x}Ge_x$ layer becomes more important for accurate device scaling and fabrication technologies.

• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.83-98
• /
• 2017

Stress-strength reliability problems arise frequently in applied statistics and related fields. In the context of reliability, the stress-strength model describes the life of a component, which has a random strength X and is subjected to random stress Y. The component fails at the instant that the stress applied to it exceeds the strength and the component will function satisfactorily whenever X > Y. The problem of estimation the reliability parameter in a stress-strength model R = P[Y < X], when X and Y are two independent two-parameter Lindley random variables is considered in this paper. The maximum likelihood estimator (MLE) and Bayes estimator of R are obtained. Also, different confidence intervals of R are obtained. Simulation study is performed to compare the different proposed estimation methods. Example in real data is used as practical application of the proposed procedure.

• 한국주조공학회지
• /
• 제37권6호
• /
• pp.173-180
• /
• 2017

In this paper, the casting design of the integrated twin-scroll turbine housing with exhaust manifold using stainless steel is investigated. Due to the complexity in its geometry and the poor castability of stainless steel, it is more crucial to set up the appropriate casting design to avoid casting defects. Gas porosity and shrinkage formation with the changes of gating systems (one-/two-side), riser conditions and pouring temperatures are examined via casting simulation and virtual castings. Simulation results show that two-side gating system produced better quality casting than that of one-side gating system, minimizing the gas content of the castings and it is also verified by X-ray analysis for the virtual castings. For the changes of riser conditions and pouring temperatures in the two-side gating system, it is found that the change of the height of two risers plays an important role in obtaining the best quality by reducing shrinkage defects.

• 한국지진공학회논문집
• /
• 제5권4호
• /
• pp.17-26
• /
• 2001

한반도 남부에서 발생 가능한 강지진동의 최대 지반운동과 주파수에 따른 특성을 추계학적 모사법을 이용하여 간접적으로 추정하였다. 또한 추계학적 모사법에 적용할 진원과 지진파 감쇠에 관한 입력자료를 계산하였다. 응력강하($\Delta$$\sigma$)는 한반도 남부와 미국 동부 및 중국의 연구결과를 종합하여 100-bar로 추정하였다. 감쇠상수는 x는 1996년 9월부터 1997년 12월까지 발생한 지진 중 비교적 기록상태가 양호한 57개의 관측자료를 이용하여 계산하였으며 진원거리(R)에 대하여 0.00112+0.000224 R로 추정되었다. 이와 같은 응력강하($\Delta$$\sigma$)와 감쇠상수 x등의 입력자료를 추계학적 모사법에 적용한 결과를 바탕으로 진원거리에 따른 강진동 감쇠공식을 유도하였다.한 결과를 바탕으로 진원거리에 따른 강진동 감쇠공식을 유도하였다.

• 산업경영시스템학회지
• /
• 제24권66호
• /
• pp.19-26
• /
• 2001

I propose the control chart pattern to provide a more comprehensive scheme for detecting process X and R shifts using individual observations in start-up process. It is important to automate the identification of special disturbances to facilitate real-time manufacturing. This papers formulates X-R charts for interpretation by artificial neural networks. In this papers, which uses the backpropagation algorithm, two samples are fed into the trained neural network to provide outputs ranging from 0 to 1. Simulation results sow that the performance of the proposed control chart using the neural network(NNCC) is quite promising. Using these NN charts, guidelines are given for detecting and classifying process X and R shifts.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.244-250
• /
• 2015

We propose a simulation technique to estimate the reduction effect of the pressure/flow pulsation by analysis of the pulsation variables and notch shape of the valve plate of a swash-plate-type variable piston pump. First, using SimulationX$^{(R)}$, we perform a theoretical kinematic analysis according to the variable swash-plate angle and rotational velocity in order to design a single-piston pump. In designing the notch shape of the valve plate of the swash-plate-type variable piston pump as one of the pulsation variables, we investigate the effect of the pulsation by comparing two notch types (circular type and V type). Then, we extend our analysis to a nine-piston pump model. This paper not only confirms the effect of the pressure/flow pulsation according to pulsation variables but can also be applied to the development of a SimulationX$^{(R)}$-based simulation technique for notch-shape optimization for a swash-plate-type variable piston pump.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.175-181
• /
• 2007

Molecular dynamics simulation (MD) of $(62-x)CaO{\cdot}38Al_{2}O_{3}{\cdot}xBaO$ glasses has been carried out using empirical potentials with the covalent term. The simulations closely reproduce the total neutron correlation functions of glass with 5 mol% BaO and physical properties of these glasses such as elastic constants. For these glasses, aluminum is tetrahedrally coordinated by oxygen, but there is a part of five-fold and six-fold coordination of aluminum. There are no major changes to the mid-range structure of glass, as barium is substituted for calcium. To predict the barium coordination number, we have used the bond valence (BV) theory and also compared the results of simulation with Bond valence. The coordination number for oxygen around barium atoms is close to 8 and the average distance of barium and oxygen is nearly 2.80 A. The viscosity of these glasses increases with the content of barium oxide substituted for calcium oxide.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 추계학술대회 논문집
• /
• pp.73-77
• /
• 2002

이 논문은 빠른 ASIP(application specific instruction processor) 시뮬레이션을 위한 재적응성을 가진 컴파일드 시뮬레이션 기법에 대해 이야기 한다. 다양한 응용분야에서의 설계 요구사항을 충족시키는 ASIP의 빠른 개발을 위해서, 건전한 설계 방법론 및 고성능의 시뮬레이터가 필요하다. 본 논문에서는 HiX$R^2$라는 ADL(architecture description language)을 이용하여 인스트럭션 수준에서 컴파일드 시뮬레이터를 자동 생성하였다. 컴파일드 시뮬레이션은 시뮬레이션 수행 시 반복되는 인스트럭션 페칭 및 디코딩 부분을 시뮬레이션 런-타임 이전에 미리 수행함으로서 일반적으로 사용되는 인터프리티브 시뮬레이션에 비하여 큰 성능향상을 얻을 수 있다. HiX$R^2$에 기반 한 컴파일드 시뮬레이션은 ARM9 프로세서와 CalmRISC32 프로세서 예제들로 수행하였고, 결과로서 인터프리티브 방식에 비해 150배 이상의 성능향상이 있었다.

• 정보학연구
• /
• 제5권4호
• /
• pp.129-137
• /
• 2002

본 논문에서는 컴퓨터 통신 네트워크의 데이터 안전을 위해서 다항식을 인수분해 하는 데 어려움이 있는 공개키 다항식 배낭 암호시스템 알고리즘을 제안하였다. 제안된 공개키 다항식 배낭 암호시스템은 먼저, 초증가 벡터 P를 변환하여 다항식 벡터 Q(x,y,z)를 형성하고, 다항식 g(x,y,z)를 선택한다. 이러한 두개의 다항식 Q(x,y,z)와 g(x,y,z)를 공개키로 한다. 공개키 다항식 Q(x,y,z), g(x,y,z)와 난수 $\alpha$를 사용하여 평문을 암호화하여 암호문 R(x,y,z)을 수신자에게 보낸다. 수신자는 암호문 R(x,y,z)을 g(x,y,z)=0의 근, x, y와 z 그리고 비밀키 벡터의 초증가성을 사용하여 평문을 구하게 된다. 따라서 해독과정에서 3변수 다항식 g(x,y,z)=0의 인수분해의 어려움 때문에 안전성을 갖는 공개키 다항식 배낭 암호시스템으로 된다. 제안된 공개키 다항식 배낭 암호시스템의 타당성을 컴퓨터 시뮬레이션을 통하여 입증하였다.