• Wind and Structures
• /
• 제20권4호
• /
• pp.579-607
• /
• 2015

A Combination Random Flow Generation (CRFG) technique for obtaining the fluctuating inflow boundary conditions for Large Eddy Simulation (LES) is proposed. The CRFG technique was developed by combining the typical RFG technique with a novel calculation of k and ${\varepsilon}$ to estimate the length- and time-scales (l, ${\tau}$) of the target fluctuating turbulence field used as the inflow boundary conditions. Through comparatively analyzing the CRFG technique and other existing numerical/experimental results, the CRFG technique was verified for the generation of turbulent wind velocity fields with prescribed turbulent statistics. Using the turbulent velocity fluctuations generated by the CRFG technique, a series of LESs were conducted to investigate the wind flow around S-, R-, L- and U-shaped building models. As the pressures of the models were also measured in wind tunnel tests, the validity of the LES, and the effectiveness of the inflow boundary generated by the CRFG techniques were evaluated through comparing the simulation results to the wind tunnel measurements. The comparison showed that the LES accurately and reliably simulates the wind-induced pressure distributions on the building surfaces, which indirectly validates the CRFG technique in generating realistic fluctuating wind velocities for use in the LES. In addition to the pressure distribution, the LES results were investigated in terms of wind velocity profiles around the building models to reveal the wind flow dynamics around bluff bodies. The LES results quantitatively showed the decay of the bluff body influence when the flow moves away from the building model.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.55-59
• /
• 2017

The purpose of this study was to quantitatively evaluate image quality using intensity profile, coefficient of variation (COV), and peak signal to noise ratio (PSNR) with respect to noise reduction techniques in the ultrasound images. For that purpose, we compared with the median filter, Rudin-Osher-Fatemi (ROF), Anscombe and proposed patch group prior based denoising (PGPD) techniques. To evaluate image quality, the Shepp-Logan phantom and the ultrasound image were acquired using simulation and experiment, respectively. According to the results, the difference of intensity profile using PGPD technique is lowest compared with original Shepp-Logan phantom. In simulation, the measured COV was 0.249, 0.198, 0.198, 0.177, and 0.080 using noisy, median, ROF, Anscombe and PGPD technique, respectively. Also, in experimental image, the measured COV was 0.245, 0.230, 0.231, 0.242 and 0.187 using noisy, median, ROF, Anscombe and PGPD technique, respectively. Especially, when we used PGPD technique, the PSNR has highest value in both simulation and experiment. In this study, we performed simulation and experiment study to compare various denoising techniques in the ultrasound image. We can expect the PGPD technique to improve in medical diagnosis with excellent noise reduction.

• 대한원격탐사학회지
• /
• 제25권2호
• /
• pp.107-112
• /
• 2009

본 연구에서는 원형레일 기반의 지상 SAR 시스템에 대한 Forward Modeling 기법을 개발하였다. 이는 기존의 선형 레일을 이용하는 지상 SAR 시스템의 응용성 확대를 위해 원형레일 기반의 지상 SAR 시스템을 개발하고자 하는 연구의 일환으로 이루어졌다. Point targets를 대상으로 선형 레일을 따라 움직이는 안테나에 대한 시뮬레이션을 통해 얻어진 SAR raw signal 자료에 대하여 Deramp FFT 기법을 이용한 기존의 지상 Linear SAR 영상화 처리 알고리즘을 적용한 결과, 대상체에 대한 정확한 영상이 얻어지고 있어 본 연구에서 개발된 시뮬레이션 기술이 정확한 raw signal을 생성하고 있음을 확인하였다. 본 연구 결과는 현재 원형 레일을 플랫폼으로 하여 안테나를 이동시키며 얻어지는 지상 SAR 자료의 영상화 처리 알고리즘 개발 및 검증에 활용되고 있으며, 다양한 응용목적에 따른 최적의 지상 SAR 자료획득 및 운용체계의 설계를 위해서도 활용될 수 있을 것으로 기대된다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제2권1호
• /
• pp.48-60
• /
• 1996

이 논문은 실감나는 컴퓨터 그래픽 애니매이션을 하기위한 새로운 방법을 제시하는데, 이것은 forward dynamic simulation 과 비선형 방정식 해법을 사용한 것이다. 이 방법을 사용하여 시뮬래이션할 경우, 물리학적 기하학적 기구학적 제약을 쉽게 만족시킬 수 있다. 이러한 forward dynamic simulation 기법은 특히 비 자발적인 동작에 대하여 아주 실감나는 동작을 제공한다. 이러한 시뮬래이션 기법에 비선형 방정식 해법을 사용하여 컴퓨터 그래픽 애니매이션 기법을 만든다. 기본적인 방법은 동작 제어 기능을 추가하여 사용자가 애니매이션 하고자 하는 목적을 만족 시키는 것인데, 비선형 함수의 문제로 변환하여 최적값만 찾으면 되는 것이다. 이러한 forward dynamic simulation 을 사용한 애니매이션을 작동기를 가진 경우와, 작동기를 가지지 않은 경우로 나누어 두개의 제어방법을 제시하는데, 특히 선형 작동기(근육)를 가진 경우에 대하여 보다 현실에 가까운 제어법을 제시한다. 이상의 두 동작 제어에 관한 예를 "마술주사위" 와 "사람의 일어섬" 예로 보여준다.

• Journal of International Society for Simulation Surgery
• /
• 제1권2호
• /
• pp.67-70
• /
• 2014

3-D medical image reconstruction technique using computer simulation technology has been used in the knowledge of the anatomical features and the biomechanical characteristics with the advancement of computer hardware and software. Especially, the use of 3-D image reconstruction technique in orthopaedics demonstrates that this technique is useful to improve surgical technique as well as to help inform the knowledge of shoulder joint anatomy. The purpose of this article is to introduce the utilization of 3-D image technology in shoulder surgeries.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.408-413
• /
• 2011

In this paper, a real-coefficient approach to Adaptive Frequency Sampling (AFS) technique is developed for efficient equivalent circuit modeling of RF components. This proposed method is advantageous than the vector fitting technique and the conventional AFS method in terms of fewer samples leading to a lower order of a rational function on a given data and to a direct conversion to an equivalent circuit for PSPICE(Personal Simulation Program with Integrated Circuit Emphsis) simulation, respectively. To validate the proposed method, the distributed equivalent circuit of a presented multi-layered RF low-pass filter is obtained using the proposed real-coefficient AFS, and then comparisons with EM simulation and circuit simulation for the device under consideration are achieved.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.207-216
• /
• 1999

Too many big accidents have been occurring in Korea during '90. Those were accidents of Sung-Soo Bridge in 1994 and Sam-Poong Department Store in 1995. It was confirmed that the causes of the accident were unreliable construction or building. Therefore, in this study are to use technique of virtual reality(VR) simulation in order to prevent construction accidents. To set up the VR in safety construction, Date Base of variables, VR model and expert system are needed. This system is to build expert system, to visualize of the VR system and navigation, and to find out design errors of construction. Therefore, the purpose of this was to analyze accident type of construction, and apply VR system for simulation technique.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.125-136
• /
• 1998

To upgrade railway traffic density without any change of signal block length between stations on existing railway lines, a new signalling system of train control "the pattern control technique" is suggested. It needs very little change to computerize the cab signal using transponders. A computer simulation system is developed to experiment the new control method. The new signalling system shows much increase of the railway traffic efficiency. The train head-way time by the fixed signalling system and the new pattern control system is analyzed. The pattern control technique shows 35% increasement of trair operation under same condition of railway and trains.nd trains.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.291-301
• /
• 1999

Too many big accidents have been occurring in Korea during '90. Those were accidents of Sung-Soo Bridge in 1994 and Sam-Poong Department Store in 1995. It was confirmed that the causes of the accident were unreliable construction or building. Therefore, in this study are to use technique of virtual reality(VR) simulation in order to prevent construction accidents. To set up the VR in safety construction, Date Base of variables, VR model and expert system are needed. This system is to build expert system, to visualize of the VR system and navigation, and to find out design errors of construction. Therefore, the purpose of this was to analyze accident type of construction, and apply VR system for simulation technique.

• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.53-60
• /
• 1997

Results from a nonequilibrium molecular dynamics (NEMD) simulation are presented for an argon liquid subject to a shear flow. The segmented molecular dynamics method and the subtraction technique used in NEMD program to reduce the thermal fluctuation noise in data are studied with different shear rates. The standard deviation in the shear stress reduced from 0.030 to 0.004 by the segmented molecular dynamics method for 50 repeated segments. On the other hand, the standard deviation of the data remained the same when the subtraction technique was applied, where as the results of shear stress by constant value in a random way.