• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.158-163
• /
• 2013

In this paper, thermal analysis of heatsink for 30 W class Chip-on-Board (COB) LED light source is performed by using SolidWorks Flow Simulation package. In order to increase the convection heat transfer, number of fin and shape of the heatsink is optimized. Furthermore, a copper spread is applied between the COB LED light source and the heatsink to mitigate the heat concentration on the heatsink. With the copper spread, the junction temperature between the COB LED light source and the heatsink is $50.9^{\circ}C$, which is $5.4^{\circ}C$ lower than the heatsink without the copper spread. Due to the improvement of the junction temperature, the light output is improved by 5.8% when the LED light source is stabilized. The temperature difference between the simulation and measured result of the heatsink with the copper spread is within $2^{\circ}C$, which verifies the validity of the thermal design method using a simulation package.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3334-3340
• /
• 2011

In this study, a computer simulation work has been performed for the carbon dioxide removal process using aqueous amine solution in the GTL (Gas To Liquids) process. 30wt% DEA(diethnaol amine) aqueous solution was utilized as a carbon dioxide remvoal agent and an absorber-stripper two-columns configuration was used. Kent-Eisenburg modeling equation built-in amine specicial package was used for the modeling of the carbon dioxide removal process. PRO/II with PROVISION 9.0, a commercial process simulator was used. Through this simulation study, heat and material balance was obtained and packing column diameter and column height were also estimated.

• Journal of The Korean Astronomical Society
• /
• v.52 no.5
• /
• pp.207-216
• /
• 2019

In this paper we introduce a software package, the Very long baseline interferometry Network SIMulator (VNSIM), which provides an integrated platform assisting radio astronomers to design Very Long Baseline Interferometry (VLBI) experiments and evaluate the network performance, with a user-friendly interface. Though VNSIM is primarily motivated by the East Asia VLBI Network, it can also be used for other VLBI networks and generic interferometers. The software package not only integrates the functionality of plotting (u, v) coverage, scheduling the observation, and displaying the dirty and CLEAN images, but also adds new features including sensitivity calculations for a given VLBI network. VNSIM provides flexible interactions on both command line and graphical user interface and offers friendly support for log reports and database management. Multi-processing acceleration is also supported, enabling users to handle large survey data. To facilitate future developments and updates, all simulation functions are encapsulated in separate Python modules, allowing independent invoking and testing. In order to verify the performance of VNSIM, we performed simulations and compared the results with other simulation tools, showing good agreement.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.55-63
• /
• 1994

FMS is two or more computer controlled units interconnected with automated workhandling equipment and supervised by an executive computer having random scheduling capabilities. The complex nature of a FMS, coupled with the need to maximize its performance, means that such a system can be effectly designed only by iterative computer simulation methods. At the operational level, simulation had a reduced role to evaluate the performance of planned FMS under a variety of operating strategies. This is probably due to the fact that few simulation models are able to access the current status data of the system. This study reviews the role of simulation for design/operation of FMS and suggests an interface scheme for incorporating a simulation package with a FMS operational database. This scheme can be used for reducing the performance gap between design and real operation of a FMS.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.395-402
• /
• 2005

This paper deals with modeling and computer simulation of a full multibody vehicle model for a driving simulator. The multibody vehicle model is based on the recursive formulation and a corresponding simulation code is generated automatically from AUTOCODE, which is a symbolic computation package developed by the authors using MAPLE. The paper describes a procedure for automatically generating a highly efficient simulation code for the full vehicle model, while incorporating realistically modeled components. The following issues have been accounted for in the procedure, including software design for representing a mechanical system in symbolic form as a set of computer data objects, a multibody formulation for systems with various types of connections between bodies, automatic manipulation of symbolic expressions in the multibody formulation, interface design for allowing users to describe unconventional force-and torque-producing components, and a method for accommodating external computer subroutines that may have already been developed. The effectiveness and efficiency of the proposed method have been demonstrated by the simulation code developed and implemented for driving simulation.

• Journal of the Korea Society for Simulation
• /
• v.5 no.1
• /
• pp.53-66
• /
• 1996

Container handling facilities in Korean ports have increased rapidly according to Korean industrialization and the worldwide containerization. Over 98% of total containers handles in Korean ports are handled in Puan ports. This paper presents the estimation method of annual container handling capacity of container terminals by the computer simulation models. Simulation models are developed utilizing SIMAN IV simulation package. Annual handling capacity of real container terminals such as BCTOC and PECT was estimated by the proposed simulation models. Also, Annual handling capaicty of planned or expected terminals in Puan port was estimated. The comparisons between container forecast demand and estimated handling capacity of Pusan port from 1996 through 2001 were made. It showed that Pusan port will have over two million TEU handling capacity shortage during that period and will face enormous port congestion. Lastly, mid term and long-term capacity expansion plansof container terminals in korean ports were discussed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.845-851
• /
• 1986

This Paper presents micro-computer simulation programs for a pneumatic control system. The simulation programs have been written in BASIC language which is suitable for 6502CPU with 48KB memory and consist of 11 programs which describe the time response and frequency response of the pneumatic actuation system. This simulation package is stored in 51/4 inch floppy diskette. The user requires no simulation expertise on the part of designer. As the result of using this simulation programs for the pneumatic control system with stabilizing tank, it has shown that the response time of the system using air as working medium takes more time to be settled but relatively stable rather than the system using helium.

• IE interfaces
• /
• v.20 no.1
• /
• pp.21-32
• /
• 2007

This paper deals with the simulation model for A-Mart logistic center design and operations. In developed simulation model, receiving docks, conveyor sorter, conveyor system, shipping docks, material handling devices and manual sorting stations are considered. Three types of cargo such as transfer center cargo, distribution center cargo and supermarket cargo are considered. The simulation model and process animation are developed using the simulation package ARENA. Among various design and operation alternatives consisting of the number of workers of receiving dock, allocation of receiving docks by cargo types, conveyor sorter velocity, the number of folk-lift, the number of manual sorting operators and overall layout, the best alternatives of each subsystem are selected by simulation analysis. The major performance measures such as sorter throughput, utilization of operators at each station, receiving docks utilization and folk-lift utilization are considered for the alternative evaluation.

• Journal of the Korean Home Economics Association
• /
• v.30 no.4
• /
• pp.1-13
• /
• 1992

A computer simulation method for textile designs was developed using a generic-purpose graphics program, LUMENA and its results were applied for costume design simulation. Its design performance was comparable with those using specialized design package programs which are in general very expensive. Three areas of textile design, print pattern design, weaving design, and knitting design, were covered. In the print pattern design simulation, a gird network library was constructed by using basic methods of repeat, and a pattern library by scanning existing print patterns. Through the modification and synthesis of library patterns, many new print patterns could be obtained. In the weaving design simulation, a thread library and a draw-down library were constructed. Using them, simulations of woven textile structures were carried out. In the knitting design simulation, a stitch library and a detail library were made from various types of knit stitch and detail drawings of knit costume, respectively. They were used to make structural knitting patterns and jacquard knitting designs. Using those simulated textile designs, costume design simulation was carried out.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.7-15
• /
• 2012

Semiconductor packages are increasingly moving toward miniaturization, lighter and multi-functions for mobile application, which requires highly integrated multi-stack package. To meet the industrial demand, the package and silicon chip become thinner, and ultra-thin packages will show serious reliability problems such as warpage, crack and other failures. These problems are mainly caused by the mismatch of various package materials and geometric dimensions. In this study we perform the numerical analysis of the warpage deformation and thermal stress of 4-layer stacked FBGA package after EMC molding and reflow process, respectively. After EMC molding and reflow process, the package exhibits the different warpage characteristics due to the temperature-dependent material properties. Key material properties which affect the warpage of package are investigated such as the elastic moduli and CTEs of EMC and PCB. It is found that CTE of EMC material is the dominant factor which controls the warpage. The results of RSM optimization of the material properties demonstrate that warpage can be reduced by $28{\mu}m$. As the silicon die becomes thinner, the maximum stress of each die is increased. In particular, the stress of the top die is substantially increased at the outer edge of the die. This stress concentration will lead to the failure of the package. Therefore, proper selection of package material and structural design are essential for the ultra-thin die packages.