• Journal of Korea Port Economic Association
• /
• v.32 no.2
• /
• pp.137-156
• /
• 2016

This study analyzes the optimal service levels of exclusive container terminals in terms of the optimal berth occupancy rate and the ships' waiting ratios, based on the number of berths. We develop a simulation model using berth throughput data from pier P, Busan New Port, a representative port in Korea, and apply the simulation results to different numbers of berths. In addition to the above results, we analyze the financial data and costs of delayed ships and delayed cargoes for the past three years from the viewpoints of the terminal operation company (TOC), shipping companies, and shippers to identify the optimal service level for berth occupancy rates that generate the highest net profit. The results show that the optimal levels in the container terminal are a 63.4% berth occupancy rate and 10.6% ship waiting ratio in berth 4,66.0% and 9.6% in berth 5, and 69.0% and 8.5% in berth 6. However, the results of the 2013 study by the Ministry of Maritime Affairs and Fisheries showed significantly different optimal service levels: a 57.1% berth occupancy rate and 7.4% ship waiting ratio in berth 4; 63.4% and 6.6% in berth 5; and 66.6% and 5.6% in berth 6. This suggests that optimal service level could change depending on when the analysis is performed. In other words, factors affecting the optimal service levels include exchange rates, revenue, cost per TEU, inventory cost per TEU, and the oil price. Thus, optimal service levels can never be fixed. Therefore, the optimal service levels for container terminals need to be able to change relatively quickly, depending on factors such as fluctuations in the economy, the oil price, and exchange rates.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.159-179
• /
• 2022

Often a network becomes complex, and multiple entities would get in charge of managing part of the whole network. An example is a utility grid. While the entire grid would go under a single utility company's responsibility, the network is often split into multiple subsections. Subsequently, each subsection would be given as the responsibility area to the corresponding sub-organization in the utility company. The issue of how to make subsystems of adequate size and minimum number of interconnections between subsystems becomes more critical, especially in real-time simulations. Because the computation capability limit of a single computation unit, regardless of whether it is a high-speed conventional CPU core or an FPGA computational engine, it comes with a maximum limit that can be completed within a given amount of execution time. The issue becomes worsened in real time simulation, in which the computation needs to be in precise synchronization with the real-world clock. When the subject of the computation allows for a longer execution time, i.e., a larger time step size, a larger portion of the network can be put on a computation unit. This translates into a larger margin of the difference between the worst and the best. In other words, even though the worst (or the largest) computational burden is orders of magnitude larger than the best (or the smallest) computational burden, all the necessary computation can still be completed within the given amount of time. However, the requirement of real-time makes the margin much smaller. In other words, the difference between the worst and the best should be as small as possible in order to ensure the even distribution of the computational load. Besides, data exchange/communication is essential in parallel computation, affecting the overall performance. However, the exchange of data takes time. Therefore, the corresponding consideration needs to be with the computational load distribution among multiple calculation units. If it turns out in a satisfactory way, such distribution will raise the possibility of completing the necessary computation in a given amount of time, which might come down in the level of microsecond order. This paper presents an effective way to split a given electrical network, according to multiple criteria, for the purpose of distributing the entire computational load into a set of even (or close to even) sized computational loads. Based on the proposed system splitting method, heavy computation burdens of large-scale electrical networks can be distributed to multiple calculation units, such as an RTDS real time simulator, achieving either more efficient usage of the calculation units, a reduction of the necessary size of the simulation time step, or both.

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.97-105
• /
• 2006

Popular content stored within the Internet may be convenient to download via modern 3G connections, but costly due to a fee charged by telecommunication providers on the basis of the amount of data transferred. This paper presents a network in which several mobile devices, called the peers, cooperate to download their assigned portion of the content using a 3G connection in order to reduce the overall cost. Then, the peers exchange their assigned portion of the content with other peers via a wireless ad hoc network and the peers reconstruct the whole content using the exchanged portion. This paper focuses on the per-peer based distribution method, and presents the performance comparison with a similar method, called the per-packet distribution method. Both methods are designed to reduce packet collisions while content is exchanged. The simulation result indicates that the per-peer based method outperforms the per-packet based method, and approximately 90% of the telecommunication cost is saved with as few as 10 peers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2839-2846
• /
• 2014

New VHF band for use in VDE is determined by WRC-12 due to the overload of AIS VDL, and the system characteristics of the VDE is recommended as ITU-R M. 1842-1. CS-TDMA, a multiple access method of AIS class B, is recommended as that of the VDE. It is inefficient for CS-TDMA just applying the report interval used in AIS class B to transmit high speed data with higher payload in the aspect of efficiency. In this paper, a simulation is executed in order to determine adequate report interval according to the number of active ships that affects directly network traffic. To this end, the performance of CS-TDMA, which includes the number of received packets, reception success rate, channel utilization, and collision rate, is investigated via a simulation.

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.15-24
• /
• 2018

High Level Architecture(HLA) for modeling and simulation is an international technical standard to achieve simulation interoperability and reusability. Building federation through the interworking of federates is being used in various fields and is being used in KR(Key Resolve), UFG(Ulchi-Freedom Guardian) as a representative in domestic military. Currently, United States Department of Defense emphasizes the HLA compliance test, which confirms the compliance of Federate by using HLA. However, due to the limitations of testing tools, an HLA compliance test of DoD is not able to perform some of the functional tests on HLA/RTI services such as federation storage/recovery services and also exclude inspection of exchange data between federates. To solve these problems, this paper proposes an HLA compliance testing system of ROK suitable for domestic situations. This will enable effective HLA compliance testing and improve interoperability between federates.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.638-644
• /
• 2018

Relay systems have recently gained attentions because of its capability of cell coverage extension and the power gain as the one of key technologies for 5G. Relays can be exploited for small-cell base stations and the autonomous network, where communication devices communicate with each other cooperatively. Therefore, the relay technology is expected to enable the low power and large capacity communication. In order to maximize the benefits of using a limited number of relays, the efficient relay selection method is required. Especially, when two nodes exchange their data with each other via relay, the relay selection can maximize the average data rate by the spatial location of the relay. For this purpose, the average data rate is analyzed first according to the relay selection. In this paper, we analyzed the average data rate when two nodes exchange their data via dual-hop decode and forward relaying considering the interference by the concurrent transmission under Nakagami-m fading channel. The correctness of the analysis is verified by the Monte Carlo simulation. The results show that the concurrent transmission is superior to the non-concurrent transmission in the high required data rate region rather than in the low required data rate region.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.21-29
• /
• 2008

The High Level Architecture(HLA) specifies a framework for interoperation between heterogeneous simulators, and Run-Time Infrastructure(RTI) is a implementation of the HLA Interface Specification. The Data Distribution Management(DDM) services, one category of IEEE 1516 HLA/RTI management services, control filters for data transmission and reception of data volume among simulators. In this paper, we propose design concept of DDM and show its implementation for light-weighted RTI. The design concept of DDM is to minimize total amount of message that each federate and a federation process generate using the rate of RTI service execution. The design of our proposed DDM follows that a data transfer mechanism is differently applied as the rate of RTI service execution. A federate usually publishes or subscribes data when it starts. The federate constantly updates the data and modifies associated regions while it continues to advance its simulation time. Therefore, the proposed DDM design provides fast update or region modification in exchange of complex publish and subscribe services. We describe how to process the proposed DDM in IEEE 1516 HLA/RTI and experiment variable scenarios while modifying region, changing overlap ratio, and increasing data volume.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.521-526
• /
• 2012

More efficient and effective volume management of trade cargo is recently requested due to FTA with foreign country. Above all, the grain is the main cargo needed in Korean food life and was appointed as the core trade cargo during FTA. This study is aimed to forecast future demands of grain volumes which are handled at Incheon port because most of the grain volumes are traded at Incheon port in Korea. System Dynamics (SD) was used for forecasting as the methodology. Also, population, yearly grain consumption per a man, GDP, GRDP, exchange rate, and BDI were used as the factors that influence grain volumes. Simulation duration was from 2000 to 2020 and real data was used from 2000 to 2007. According to the simulation, 2020's grain volumes at Incheon port were forecasted to be about 2 million tons and grain volumes handled at Incheon port were continuously reduced. In order to measure accuracy of the simulation, this study implemented MAPE analysis. And after the implementation, the simulation was decided as a much more accurate model because MAPE value was calculated to be 6.3%. This study respectively examined factors using the sensitivity analysis. As a result, in terms of the effects on grain volume in Incheon Port, the population factor is most significant and exchange rate factor is the least.

• International journal of advanced smart convergence
• /
• v.5 no.1
• /
• pp.34-46
• /
• 2016

Networked Control System (NCS) has evolved in the past decade through the advances in communication technology. The problems involved in NCS are broadly classified into two categories namely network issues due to network and control performance due to system network. The network problems are related to bandwidth allocation, scheduling and network security, and the control problems deal with stability analysis and delay compensation. Various delays with variable length occur due to sharing a common network medium. Though most delays are very less and mostly neglected, the network induced delay is significant. It occurs when sensors, actuators, and controllers exchange data packet across the communication network. Networked induced delay arises from sensor to controller and controller to actuator. This paper presents an adaptive delay compensation process for efficient control. Though Smith predictor has been commonly used as dead time compensators, it is not adaptive to match with the stochastic behavior of network characteristics. Time delay adaptive compensation gives an effective control to solve dead time, and creates a virtual environment using the plant model and computed delay which is used to compensate the effect of delay. This approach is simulated using TrueTime simulator that is a Matlab Simulink based simulator facilitates co-simulation of controller task execution in real-time kernels, network transmissions and continuous plant dynamics for NCS. The simulation result is analyzed, and it is confirmed that this control provides good performance.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.49-56
• /
• 2010

Considering the flood problem in urban areas, it is important to estimate disaster risk using accurate numerical analysis for inundation. In this study, it is carried out to calculate inundation depth in Samcheok city which suffered from serious flood damage in 2002. The urban flood model was developed by cording Manning n, elevation, and building's rare on ArcGIS for reducing error on data exchange, and applied for estimating flood damage by grid. This paper describes the extraction of sewer lines and buildings area, estimates its influence on flood inundation extent, and integrated 1D/2D flow to simulate inundation depth in high-density building area. This paper shows an integrated urban flood modeling including rainfall-runoff, inundation simulation, and mathematical flood damage estimation, and will serve drainage design for reducing its damage.