• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.399-410
• /
• 2015

A 6.5 V/50 kA high-frequency switching power supply (HSPS) system composed of 10 power modules is developed to meet the requirements of copper-foil electrolysis. The power module is composed of a two-leg pulse width modulation (PWM) rectifier and a DC/DC converter. The DC/DC converter adopts two full-wave rectifiers in parallel to enhance the output. For the two-leg PWM rectifier, the ripple of the DC-link voltage is derived. A composite control method with a ripple filter is then proposed to effectively improve the performance of the rectifier. To meet the process demand of copper-foil electrolysis, the virtual impedance-based current-sharing control method with load current full feedforward is proposed for n-parallel DC/DC converters. The roles of load current feedforward and virtual impedance are analyzed, and the current-sharing control model of the HSPS system is derived. Virtual impedance is used to adjust the current-sharing impedance without changing the equivalent output impedance, which can effectively reduce current-sharing errors. Finally, simulation and experimental results verify the structure and control method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권2호
• /
• pp.87-95
• /
• 2010

The structural intensity analysis, which calculates the magnitude and direction of vibrational energy flow from vibratory velocity and internal force at any point of a structure, can give information on dominant transmission paths, positions of sources and sinks of vibration energy. This paper presents a numerical simulation system for structural intensity analysis and visualization to apply for ship structures based on the finite element method. The system consists of a general purpose finite element analysis program MSC/Nastran, its pre- and post-processors and an in-house program module to calculate structural intensity using the model data and its forced vibration analysis results. Using the system, the structural intensity analysis for a 4,100 TEU container carrier is carried out to visualize structural intensity fields on the global ship structure and to investigate dominant energy flow paths from harmonic excitation sources to superstructure at resonant hull girder and superstructure modes.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.695-703
• /
• 2014

In this paper, a fault detection scheme for DC-link voltage sensor and its fault tolerant control strategy for three-phase AC/DC/AC PWM converters are proposed, where the Luenberger observer is applied to estimate the DC-link voltage. The Luenberger observer is based on a converter model, which is derived from the voltage equations of a grid-side converter and the power balance on a DC link. A fault of the voltage sensor is detected by comparing the measured value of the DC-link voltage with the estimated one. When a sensor fault is detected, a fault tolerant control strategy is performed, where the estimated DC-link voltage is used for the feedback control. The estimation error from the observer is about 1.5 V, which is sufficiently accurate for feedback control. In addition, it is shown that the observer performance is robust to parameter variations of the converter. The validity of the proposed method has been verified by simulation and experimental results.

• 한국소음진동공학회논문집
• /
• 제26권1호
• /
• pp.39-48
• /
• 2016

The latest research has shown that the turbulence-induced noise is important in total characteristics of flow noise. Also, turbulence-induced noise have a significant influence for performance of sonar dome. In this paper, Flow analysis is performed on vicinity of the sonar dome model using Large Eddy Simulation method. Also, direct method that extracts perturbational sound pressure, FW-H method without turbulence-induced noise and permeable FW-H method that is able to calculate turbulence- induced noise were compared in order to show turbulence effect.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.427-438
• /
• 2019

It was important to estimate the full-scale operating performance including actual RPM and engine power of a ship since the operation efficiency during a voyage could be evaluated from the values. In the previous research, an entire voyage was simulated by following recorded speeds obtained from AIS and full-scale measurement data. Although reasonable tendencies were observed in the estimated speed, actual RPM, and engine power, it was impossible for them to be completely corresponded with the measured values due to the difference between actual operation and mathematical model. In this paper, alternative approaches to cope with the speed, actual RPM, and engine power were suggested by following the given speed, RPM, and power respectively. After entire voyages were simulated according to a given value, the effects of the value on the estimated performance were investigated. And, it was confirmed that the appropriate approach could be differently chosen according to the aim of the simulation or given value.

• 한국항행학회논문지
• /
• 제20권2호
• /
• pp.116-126
• /
• 2016

본 논문에서는 선내에서 수집되는 데이터를 이용하는 선박과 육상의 어플리케이션 서비스의 효율적인 데이터 통합관리를 위한 선박용 어플리케이션 시스템을 설계하고 모듈을 구현하였다. 선박용 어플리케이션 시스템은 선내 수집 데이터를 활용하는 선박과 육상의 서비스를 지원하고 개별 장비간 원활한 연동 서비스를 제공하기 위하여 IALA에서 논의되고 있는 데이터 공유 시스템 모델과 ISO 16425의 XML 구조를 적용하였으며, 시스템 운영을 위한 공통 모듈과 데이터 수집 및 통합관리를 위한 윈도우 서비스, 관리를 위한 웹서비스 모듈을 구현하였다.

• 해양환경안전학회지
• /
• 제20권1호
• /
• pp.86-95
• /
• 2014

조선소의 생산성은 제한된 자원을 얼마나 효율적이고 체계적으로 관리하고 사용하는가에 달려있다. 최근 들어 조선소에서는 생산관리 시스템을 고도화하기 위해 시뮬레이션 기법을 적용한 연구가 활발히 진행되고 있다. 본 논문에서는 시뮬레이션 기법을 생산관리에 적용한 조선소의 시뮬레이션 기반 생산 개념을 연구하였다. 이는 조선소 현장에서 경험과 직관에 의한 의사결정을 지양하고, 정량적이고 구체적인 데이터에 기반을 둔 개선방안을 확립할 수 있게 한다. 본 논문에서는 조선소의 생산 계획 중 선표 계획 영역에 대한 시뮬레이션 적용 연구를 수행하였으며, 이를 위해 조선소의 생산 계획 프로세스와 시스템을 분석하고 상용 시뮬레이션 소프트웨어를 이용한 시뮬레이션 시스템의 설계를 수행하였다. 이러한 시뮬레이션 시스템은 현재 조선소 생산관리 시스템의 운용환경을 고려하여 웹 환경에서 운용가능한 구조를 갖고 있으며, 이를 통해 조선소에서는 보다 손쉽게 생산 계획을 시뮬레이션하고 결과를 분석함으로써 보다 신뢰도 높은 생산 계획을 수립할 수 있을 것으로 기대한다.

• 농업과학연구
• /
• 제46권4호
• /
• pp.813-825
• /
• 2019

This paper investigated the effects of a government production and shipment stabilization policy and the improvement plan for vegetables in Korea. In this study, a simulation focused on the changes in farm income for Chinese cabbages & radishes using scenarios. The result shows an increase in farm income according to the government policy. In the short-term, demand and supply are fixed, and the policy effect is positive due to the price support effect of the project. However, for mid- to long-term, the price decreases due to the expansion of supply by business beneficiaries, which is likely to be adversely affected by an unstable supply and demand. This increases the burden of government and local government subsidies. This phenomenon is expected to be amplified as the ratio of production and shipbuilding stabilization programs and items expand. When expanding items and adjusting and setting the percentage of participation in the project, it is desirable to set and operate the appropriate business ratio taking into consideration the demand. To improve the effectiveness of the policy, the following remedies were suggested. First, national supply and demand guidelines should be set up, and the autonomous supply and demand control of the producers should be guided by the different preservation according to the implementation of the supply and demand control obligation. As for detailed equipment, it is necessary to establish the reproduction price for each item, set the base price for each wholesale market, increase the incentive for the producers to participate, and fund a business budget to secure business stability.

• 해양환경안전학회지
• /
• 제27권4호
• /
• pp.538-549
• /
• 2021

본 연구에서는 Froude 수 1.0으로 운항하는 길이 약 10m 급 소형 고속선박의 에너지 효율 설계를 위해 선미부에 트림 탭을 부착하였고, 선저 면과의 각도에 따른 항주자세와 저항성능의 변화를 살펴보았다. 성능 해석은 CFD 해석을 통해 수행되었으며, 축척에 의한 영향을 보기 위해 모형선과 실선에 대해 각각 해석을 수행 후 두 결과로부터 예측된 실선의 성능을 비교하였다. 나선에 대한 해석 결과는 두 결과가 전반적으로 유사하였고, 트림 탭이 부착된 경우 선저 면과의 각도가 동일할 때 자세 변화량이 달라 전 저항의 차이로 이어졌지만 자세에 따른 저항 변화 경향은 유사하였다. 이로부터 축척 효과가 있더라도 저항 저감 경향으로부터 최적 항주자세를 찾을 수 있으나, 트림 탭에 의한 자세 변화와 실선 주위 유동의 특성을 알기 위해서는 실선에 대한 직접적인 해석이 필요함을 알 수 있다.

• Wind and Structures
• /
• 제19권1호
• /
• pp.1-14
• /
• 2014

Rail-mounted cranes can be easily damaged by a sudden gust of wind while working at a running speed, due to the large mass and high barycenter positions. In current designs, working rail-mounted cranes mainly depend on wheel braking torques to resist large wind load. Regular brakes, however, cannot satisfactorily stop the crane, which induces safety issues of cranes and hence leads to frequent crane accidents, especially in sudden gusts of wind. Therefore, it is necessary and important to study the braking performance of working rail mounted cranes under wind load. In this study, a simplified mechanical model was built to simulate the working rail mounted gantry crane, and dynamic analysis of the model was carried out to deduce braking performance equations that reflect the qualitative relations among braking time, braking distance, wind load, and braking torque. It was shown that, under constant braking torque, there existed inflection points on the curves of braking time and distance versus windforce. Both the braking time and the distance increased sharply when wind load exceeded the inflection point value, referred to as the threshold windforce. The braking performance of a 300 ton shipbuilding gantry crane was modeled and analyzed using multibody dynamics software ADAMS. The simulation results were fitted by quadratic curves to show the changes of braking time and distance versus windforce under various mount of braking torques. The threshold windforce could be obtained theoretically by taking derivative of fitted curves. Based on the fitted functional relationship between threshold windforce and braking torque, theoretical basis are provided to ensure a safe and rational design for crane wind-resistant braking systems.