• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.114-123
• /
• 1996

The major objective of the present paper is to estabilish analytical technique in order to closely understand and analyze the actual shearing process. First of all, isothermal and non-isothermal FE-simulation of the shearing process are carried out using finite element software DEFORM. Based on preliminary simulation using DEFORM, the finite element program to analyze two dimensional shearing process is developed. The ductile fracture criterion and the element kill method are also used to estimate if and where a fracture will occur and to investigate the features of the sheared surface in shearing process. It can be seen that the developed program combined with the ductile fracture criterion and element kill method has enabled the achievement of FE-simulation from initial stage to final stage of shearing process. The effects of punch-die clearance on shearing process are also investigated. In order to verify the effectiveness of the proposed technique the simulation results are compared with the known expermental data. It is found that the results of the present work are in close agreement with the published experimental results.

• Communications for Statistical Applications and Methods
• /
• 제28권3호
• /
• pp.251-265
• /
• 2021

This paper discusses the pricing of autocallable structured product with knock-in (KI) feature using the exit probability with the Brownian Bridge technique. The explicit pricing formula of autocallable ELS derived in the existing paper handles the part including the minimum of the Brownian motion using the inclusion-exclusion principle. This has the disadvantage that the pricing formula is complicate because of the probability with minimum value and the computational volume increases dramatically as the number of autocall chances increases. To solve this problem, we applied an efficient and robust simulation method called the Brownian Bridge technique, which provides the probability of touching the predetermined barrier when the initial and terminal values of the process following the Brownian motion in a certain interval are specified. We rewrite the existing pricing formula and provide a brief theoretical background and computational algorithm for the technique. We also provide several numerical examples computed in three different ways: explicit pricing formula, the Crude Monte Carlo simulation method and the Brownian Bridge technique.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.181-188
• /
• 2011

A simulation technique, which simulate dynamic motion and communication environments of ship in the lab, is needed in order to reduce the testing cost when we evaluate the transfer alignment performance of shipboard INS. Hardware-In-the-Loop Simulation(HILS) can be used as an effective test method for those system because it can provide flexible and realistic simulation environments, various test scenario, and repeated test environment in the lab without additional cost and person. This paper presents the methods for implementing the real time HILS environment for testing transfer alignment performance of shipboard INS. It includes real time executive for controlling realtime simulation and calculating the ship motion, communication method for interfacing between the systems, and coordinate transformation method for converting real ship coordinate attitude data to lab coordinate attitude data.

• 한국컴퓨터그래픽스학회논문지
• /
• 제2권1호
• /
• pp.48-60
• /
• 1996

이 논문은 실감나는 컴퓨터 그래픽 애니매이션을 하기위한 새로운 방법을 제시하는데, 이것은 forward dynamic simulation 과 비선형 방정식 해법을 사용한 것이다. 이 방법을 사용하여 시뮬래이션할 경우, 물리학적 기하학적 기구학적 제약을 쉽게 만족시킬 수 있다. 이러한 forward dynamic simulation 기법은 특히 비 자발적인 동작에 대하여 아주 실감나는 동작을 제공한다. 이러한 시뮬래이션 기법에 비선형 방정식 해법을 사용하여 컴퓨터 그래픽 애니매이션 기법을 만든다. 기본적인 방법은 동작 제어 기능을 추가하여 사용자가 애니매이션 하고자 하는 목적을 만족 시키는 것인데, 비선형 함수의 문제로 변환하여 최적값만 찾으면 되는 것이다. 이러한 forward dynamic simulation 을 사용한 애니매이션을 작동기를 가진 경우와, 작동기를 가지지 않은 경우로 나누어 두개의 제어방법을 제시하는데, 특히 선형 작동기(근육)를 가진 경우에 대하여 보다 현실에 가까운 제어법을 제시한다. 이상의 두 동작 제어에 관한 예를 "마술주사위" 와 "사람의 일어섬" 예로 보여준다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.245-250
• /
• 2004

The purpose of this study is to understand the classified advantages and weak points of each landscape predictable simulation methods & techniques and to examine the suitability of through or selecting the predictable method suitable for present skill range and on studying the case of resident district unit plan. Therefore, we examined and evaluated through the case study of two sites. The results are as follows. It was very available to process the skill of mapping and picture combining method together at once. But, there was a limitation that is not flexible in the range of error on accuracy, so it was necessary to practically use the equipment and to study the theory. Providing the standard suitable for regional landscape character in each evaluation standard was also necessary.

• 대한조선학회논문집
• /
• 제39권4호
• /
• pp.1-10
• /
• 2002

초기쇄파의 수치모사에는 지금까지 경계적분법이 주로 쓰여왔고, 이 방법은 과도한 계산시간의 문제를 제외하고는 어느 정도 성공적이라고 할 수 있다. 본 논문에서는 쇄파실험을 수치모사하기 위한 새로운 수치기법을 보였다. 이 수치기법은 고차 스펙트럴/경계요소법과 경계적분법을 순차적으로 사용하며, 계산시간을 현저히 줄여준다. 조파 및 파 에너지 집중과정은 고차 스펙트럴/경계요소법에 의해 효율적으로 수치모사되고, 파의 전복과정만이 경계적분법에 의해 계산된다. 계산예에서 높은 입자속도와 가속도 등 쇄파의 두드러진 특성이 보여졌다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권2호
• /
• pp.119-130
• /
• 2019

Positron emission tomography (PET) is widely used imaging modality for effective and accurate functional testing and medical diagnosis using radioactive isotopes. However, PET has difficulties in acquiring images with high image quality due to constraints such as the amount of radioactive isotopes injected into the patient, the detection time, the characteristics of the detector, and the patient's motion. In order to overcome this problem, we have succeeded to improve the image quality by using the dynamic image reconstruction method based on singular value decomposition. However, there is still some question about the characteristics of the proposed technique. In this study, the characteristics of reconstruction method based on singular value decomposition was estimated over computational simulation. As a result, we confirmed that the singular value decomposition based reconstruction technique distinguishes the images well when the signal - to - noise ratio of the input image is more than 20 decibels and the feature vector angle is more than 60 degrees. In addition, the proposed methode to estimate the characteristics of reconstruction technique can be applied to other spatio-temporal feature based dynamic image reconstruction techniques. The deduced conclusion of this study can be useful guideline to apply medical image into SVD based dynamic image reconstruction technique to improve the accuracy of medical diagnosis.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
• /
• pp.427-432
• /
• 2004

최근 건설시장의 경쟁이 치열해지고, 건설생산성을 향상시키는 것이 기업의 경쟁력 확보라는 인식이 높아짐에 따라 건설업에서도 생산성과 효율성에 대한 관심의 풍요도가 증대되고 있다. 본 연구에서는 기존의 생산성 측정 방식을 활용한 사례조사를 통해 생산성을 측정하고 측정된 내용에 근거하여 작업개선사항을 제시하였다. 제안된 개선사항은 시뮬레이션(simulation)기법을 동해 검증하였다. 본 논문의 의의는 생산성 측정을 분석하는데 있어 시뮬레이션 기법이 현장여건을 모두 고려한 최적의 대안은 아니지만 현장관리자로 하여금 상황에 적합한 최적의 작업방식을 선택하게하고 생산량을 예측할 수 있는 방법을 제시했다는 점에 있다.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.73-84
• /
• 1994

Output analysis is one of the most important fields of simulation to achieve the accurate simulation results. This study shows how to analyze simulation output data in the steady state using Procrustes analysis technique which has not been used in the field of simulation yet. In this paper Procrustes analysis method is used to perform the analysis of simulation output efficiently and effectively by applying the improved version of the method. The experiments are conducted using M/M/1 queueing simulation model. The results obtained by Procrustes analysis method show better estimates for average waiting times and average queue lengths which are closer to true values and narrower confidence intervals than when replication-deletion method is used. Also it requires the smaller number of simulation runs.

• 한국경영과학회지
• /
• 제18권2호
• /
• pp.105-130
• /
• 1993

This study deals with finding a schedule for the movement of a material handling device (elevator) in a manufacturing plant. Two different algorithm (Traveling Salesman Technique and Greedy Algorithm) are used in the scheduling of the elevators using a simulation technique to determine the proper method of scheduling the elevator movement. Based on the simulation analysis, we have found that the Greedy algorithm serves better than the algorithm based on Traveling Salesman technique for scheduling the movement of a material handling device in the manufacturing plant.