• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 춘계학술발표회
• /
• pp.191-200
• /
• 2003

Gunsan coastal area is one of region increasing pollution problems. One of the most important factors that cause eutrophication is nutrient materials containing nitrogen and phosphorus which stem from excreation of terrestial sources. At this study, the three-dimensional numerical hydrodynamic and ecosystem model, which was developed by Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the eutrophication. The residual currents, which were obtained by integrating the simulated tidal currents over 1 tidal cycle, showed the presence of a typical. Density driven currents were generated westward at surface and eastward at the bottom in Geum estuary area where the fresh waters are flowing into. The ecosystem model was calibrated with the data surveyed in the field of the study area in annual average. The simulated results of DIN were fairly good coincided with the observed values within relative error of 32.39%. correlation coefficient(r) of 0.99. In the case of DIP, the simulated results were fairly good coincided with the observed values within relative error of 24.26%, correlation coefficient (r) of 0.82. The simulations of DIN and DIP concentrations were performed using ecosystem model under the conditions of 20 ∼ 80% pollution load reductions from pollution sources. In study area, concentration of DIN and DIP were reduced to 20∼80% and under 10% in case of the 80% reduction of the input loads from fresh water respectively. But pollution loads from sediment had hardly affected DIN and DIP concentration. For the environment management of coastal areas, in case of Kunsan area, the most important pollution sources affecting eutrophication phenomenon were found to be the input loads from fresh water.

• 한국기후변화학회지
• /
• 제7권4호
• /
• pp.477-484
• /
• 2016

In general, $CH_4$ concentrations generated in combustion facilities are known to be ppm units. In most cases, $CH_4$ samples are collected in Tedlar bags and transported to laboratories for analysis. Considering this fact, in the present study, an attempt was made to find out how long samples can be stored in cases where they are kept in bags and transported as a preliminary study for sampling. According to the results of the experiment using simulated gases (1 ppm, 5 ppm, 10 ppm) in Tedlar bag, $CH_4$ was safe up to 240 hr which is the full time. In the case of simulated gases are containing 4 kind gases ($N_2$, $CO_2$, $CH_4$, and $N_2O$). Field samples (samples of obtained by collecting combustion facilities' exhaust gases) are known to contain highly reactive substances (for example NOx, SOx, and VOCs) and may affect each other. In the present study, one site sample was secured from each of a bituminous coal combustion facility and an LNG combustion facility and whether the concentrations of $CH_4$ gas would change over time (24 hr, 96 hr, 144 hr, 192 hr) was checked. Since site samples could not be analyzed on the day of collection, an experiment was started 24 hr after the time point of sampling to analyze the samples. As with the results of analysis of the simulated gas (240 hr), the results of analysis using the site sample indicated that it could be stored for the full study period 192 hr. Therefore, it was judged that if 192 hr would be taken after sampling before the sample would be analyzed, the concentration value should be reliable.

• 한국환경과학회지
• /
• 제22권8호
• /
• pp.1029-1041
• /
• 2013

In this study, eight episode days of high-concentration $PM_{10}$ occurrences in the Gimhae region between 2006 and 2011 were analyzed. Most of them appeared in winter and the highest concentration was observed around 12 LST. Furthermore, the wind direction, wind velocity, and temperature elements were compared with observed values to verify the WRF numerical simulation results used in this study, and they simulated well in accordance with the trend of the observed values. The wind was generally weak in the high-concentration episode days that were chosen through surface weather chart and the numerical simulation results for wind field, and the air pollutants were congested due to the effects of the resulting local winds, thereby causing a high concentration of air pollutants. Furthermore, the HYSPLIT model was performed with the WRF numerical simulation results as input data. As a result, they originated from China and flowed into Gimhae in all eight days, and the lowest concentration appeared on the days when recirculation occurred.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.87-95
• /
• 1996

We have studied the effects of La concentration on the optical and electrical properties of lead lanthanum titanate (PLT) thin films by using sol-gel method. Both the optical and electrical properties are greatly affected by the La concentration. The refreactiv eindices of the films varied from 2.23 to 1.93 with varying La concentration in the range from 15 to 33 mol%. The dielectric constants of the films vary form 340 to 870 with varying La concentration in the range form 15 to 33 mol%. Hysteresis loop becomes slimmer with the increase of La concentration form 15 to 28mol% and little fatter again with the increase of La concentration form 28 to 33 mol%. Among the films investigated in this research, PLT(28) thin film shows the best dielectric properties for the application to the dielectrics of ULSI DRAM's. At the frequency of 100Hz, the dielectric constant and the loss tangent of PLT(28) thin films are 940 and 0.08 respectively. Its leakage current density at 1.5${\times}10^{5}$V/cm is 1${\times}10^{-6}A/cm^{2}$. The comparision between the simulated and the experimental curves for the switching transient characteristics shows that PLT (28) thin films behaves like normal dielectrics.

• 한국수자원학회논문집
• /
• 제46권11호
• /
• pp.1115-1128
• /
• 2013

본 연구의 목적은 충주호 유역을 대상으로 2차원 횡방향 평균 수리 및 수질모형인 CE-QUAL-W2를 이용하여 호소내 수온분포, 부유물질 및 부영양화 과정의 변화특성을 모의하고 모형의 적용성을 평가하는 것이다. 지형 및 단면자료 구축을 위해 충주호를 남한강 본류(branch 1)와 유입 경계부(branch 2~7)로 구분하여 격자를 구성하였다. 호소 수질모델링을 위한 주요 입력 자료로 기상자료, 호소의 수온과 탁도 초기조건, 하천의 유량과 수온, 수질 경계조건 자료를 구축하였다. 이후 실측된 수온, 부유물질(SS), 총질소(TN), 총인(TP), 조류(Chl-a)에 대하여 모형의 보정(2010) 및 검증(2008)을 수행하여 모형의 적용가능성을 평가하였다. 충주호의 수온은 4월부터 표층수온이 증가하여 7월초에 성층현상이 발생되고 12월에는 연직수온분포가 일정하게 유지되었다. 집중호우 발생 후에는 성층구조가 교란되어 수온약층이 약 10 m가량 하강하였다. SS는 수온과 동일한 패턴으로 집중호우 발생 후에 증가하다가 12월에 안정화되었으며, 2008년 7월에 발생된 중층밀도류의 분포 현상을 잘 재현하였다. TN, TP의 경우 농도의 범위를 잘 재현하였지만, 모형 내에서 질소성분의 침강속도 및 인의 흡착-침전과정이 적절히 모의되지 않아 오차가 발생하였다. Chl-a의 경우 2010년과 2008년 여름의 조류의 성장패턴을 잘 반영하였지만, 모형이 횡방향 평균 유속과 농도를 사용함에 따른 모형의 한계점이 나타났다.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1768-1774
• /
• 2008

PWR 정지화학 조건에서 모사실험하여 니켈페라이트 입자의 거동을 조사하였다. 농도가 Li 0.1 ppm, B 2000 ppm인 모사실험 용액의 온도는 $300^{\circ}C$에서 $0.625^{\circ}C/min$의 비율로 $150^{\circ}C$까지 감소시킨 후 일정 시간 동안 $150^{\circ}C$를 유지하였고 이때의 압력은 2500psi 이하로 유지하였다. 수소 농도 5, 15, 25 cc/kg $H_2O$ 일 때 온라인으로 입자 분포를 측정하였고 용해된 니켈 농도도 분석하였다. 실험결과 온도 감소 시 세 가지 수소 농도일 때 모두 총입자 수는 큰 변화가 없었다. 그러나 온도가 감소하고 일정하게 유지될 때 입자는 작아졌다. 입자 크기 분포 변화의 정도는 $H_2$ 15cc/kg $H_2O$ 일 때가 가장 크게 나타났다. 니켈 이온의 농도는 온도가 감소하고 수소 15 cc/kg $H_2O$ 일 때 증가하였다. 이 결과 니켈 페라이트는 온도 변화 시, 수소 15 cc/kg $H_2O$ 일 때 불안정 한 것으로 보여 진다.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.789-795
• /
• 2014

초산은 묽은 산에 의해 처리되어 얻어진 헤미셀룰로오스 가수분해액 중 가장 양이 많을 뿐만 아니라 중대한 에탄올 발효 저해물질이다. 그 가수분해액으로부터 초산을 선택적으로 제거하는데 최적인 분리시스템을 찾기 위하여 모사 헤미셀룰로오스 가수분해액으로 자일로스, 초산과 황산의 혼합물이 선택되었다. 이러한 목적을 이루기 위해 에멀젼형 액막법이 모사 헤미셀룰로오스 가수분해액으로부터 초산을 제거하는데 적용되었다. W/O 에멀젼의 주요 구성 성분들, 즉 아민계 추출제 종류, 계면활성제 조성, 첨가제 종류와 회수제의 종류 및 농도가 모사 헤미셀룰로오스 가수분해액에 있는 초산, 자일로스와 황산의 추출에 미치는 영향이 조사되었다. 특별한 실험 조건에서, 초산의 추출율은 95% 이상이었고, 자일로스의 손실은 미미하였는데, 이것은 현 에멀젼형 액막법이 경제성이 높은 공정이 될 수 있다는 것을 의미한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.43-48
• /
• 1998

Prior to launch, simulated radiances of the Ocean Scanning Multispectral Imager (OSMI) will be very useful to guess the real imagery of OSMI and to check the data processing system for OSMI. The data processing system for OSMI which is one sensor of Korea Mult i - Purpose Satellite (KOMPSAT) scheduled for launch in 1999 is being developed based on the SeaWiFS Data Analysis System (SeaDAS). Such a simulation should include the spectral bands, orbital and scanning characteristics of the OSMI and KOMPSAT spacecraft. The simulation is also very helpful for finding and preparing for problem areas before launch. This paper describes a method to create simulated radiances of the OSMI over the oceans. Our method for constructing a simulated OSMI imagery is to propagate a KOMPSAT orbit over a field of Coastal Zone Color Scanner (CZCS) pigment values and to use the values and atmospheric components to calculate total radiances. A modified Brouwer - Lyddane model with drag was used for the realistic orbit prediction, the CZCS pigment data were used to compute water - leaving radiances, and a variety of radiative transfer models were used to calculate atmospheric contributions to total radiances detected by OSMI. Imagery of the simulated OSMI total radiances for 6 nominal bands was obtained. As expected, water - leaving radiances were only a small fraction of total radiances and sun glint contaminations were observed near the solar declination. Therefore, atmospheric correction is very important in the calculation of pigment concentration from total radiances. Because the imagery near the sun's glitter pattern is virtually useless and must be discarded, more advanced mission planning will be required.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.245-252
• /
• 2010

For the purpose of evaluating to remove elemental mercury using SCR (Selective Catalytic Reduction) catalysts, the result of the concentration variation of elemental mercury in lab experiment and field measurement was compared. The effect of the elemental mercury oxidation on commercial catalysts was studied in simulated gas. Three species of SCR catalyst, $V_2O_5-TiO_2$ type, were selected. The elemental mercury reduced 30% without HCl gas in SCR operating condition. But the width of reduction increased 60% at 20 ppm HCl gas. According to the result of field measurement, reduction rate of elemental mercury at SCR outlet showed 60%. The total mercury concentration decreased about 20%. The results were similar to the lab test. The results of chemical analysis of test sample showed increase of mercury concentration but surface change was not observed.

• Bulletin of the Korean Chemical Society
• /
• 제32권11호
• /
• pp.3967-3972
• /
• 2011

A whole body physiologically based pharmacokinetic (PBPK) model was applied to investigate absorption, distribution, and physiologic variations on pharmacokinetics of imatinib in human body. Previously published pharmacokinetic data of the drug after intravenous (i.v.) infusion and oral administration were simulated by the PBPK model. Oral dose absorption kinetics were analyzed by adopting a compartmental absorption and transit model in gut section. Tissue/plasma partition coefficients of drug after i.v. infusion were also used for oral administration. Sensitivity analysis of the PBPK model was carried out by taking parameters that were commonly subject to variation in human. Drug concentration in adipose tissue was found to be higher than those in other tissues, suggesting that adipose tissue plays a role as a storage tissue for the drug. Variations of metabolism in liver, body weight, and blood/plasma partition coefficient were found to be important factors affecting the plasma concentration profile of drug in human body.