• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.38-43
• /
• 2015

본 논문에서는 소프트웨어로 검증된 GPS 신호생성 알고리즘을 FPGA 기반으로 구현함으로써 RF레벨에서 다중 위성신호를 실시간으로 생성 가능한 GPS 신호생성기에 대해 기술한다. 탑재된 신호생성 알고리즘은 궤도 및 환경 오차 모델을 반영하고 수신기 위치를 기반으로 위성 신호를 모의한다. GPS 신호생성기 하드웨어는 16개의 위성 신호를 실시간으로 생성할 수 있는 디지털보드와 IF Data를 RF 신호로 변환해주는 아날로그보드로 구성되어 있다. Windows 기반의 신호생성 시뮬레이터를 제어하는 소프트웨어를 통해 항법신호뿐만 아니라 기만신호, 재밍신호를 생성이 가능하며 GIS 화면위에서 수신기의 경로를 편집할 수 있는 시나리오 구성 기능이 제공된다. GPS 신호생성기는 성능은 상용수신기를 이용해 검증하였다. GPS 신호생성기를 이용한 응용 예로써 실내측위 시스템을 구성하고 시험하였으며 실내측위 시스템의 정확도를 개선하는 것은 추가적인 연구를 진행하고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1299-1303
• /
• 1995

The detection and measurement of partial discharge activity prevalent in the solid insulating systems of high-voltage generator stator windings has, for many years, been a recognized method of assessing the insulation condition of such systems. Partial discharge activity occurs at sites of degradation within, or at the surface of, stator's insulation systems under high voltage stressing. However, partial discharge pulses suffer from attenuation and distortion when transmitted along windings, because of the complex L-C network between windings. The mode of transmission varies with the signal frequency and is dependant on the geometrical configurations of windings. This paper reports the investigated results of the signal propagation characteristics along the windings when both sinusoidal signals and simulated partial discharge pulses are injected at the various positions of stator windings within the 25 MVA, 11 kV hydro generator. The on-line identification technique of partial discharge location in generator windings is also proposed in this study.

• 한국통신학회논문지
• /
• 제22권3호
• /
• pp.506-514
• /
• 1997

In this paper, we implement digital circuit of despreading delay lock loop for GPS receiver. The designed system consists of Epoch signal generator, two 13bit correlators which correlates the received C/A code and the locally generated C/A code in the receiver, the C/A code generator which generates C/A code of selected satellite, and the direct digital clock synthesizer which generates the clock of the C/A code generator to control the phase and clock rate, the clock controller, and the clock divider. The designed circuit has the function of the acquisition and tracking by the autocorrelation characteristics of Gold code. The controller generates each other control signals according to the correlation value. The designed circuit is simulated to verify the logic functional performance. By using the simulator STR-2770 that generates the virtual GPS signal, the deigned FPGA chip is verified the circuit performance.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.70-73
• /
• 2010

A magnetic phase is partly produced in a steam generator tube due to stress and heat, because steam generator tubes are exposed to high temperature, high pressure and radioactivity conditions. This adversely affects the safety of steam generator tubes. However, it is difficult to detect it using conventional eddy current methods. Therefore, a new type of probe is needed to separate the signals from the defects and magnetic phases. In this study, a new U-type yoke, which contained two types of coils, a magnetizing coil and detecting coil, was designed. In addition, the signal induced by the magnetic phase and defect in an Inconel 600 plate were simulated.

• 전기전자학회논문지
• /
• 제9권2호
• /
• pp.136-142
• /
• 2005

본 논문에서는 3차원 레이다 시험용 타이밍신호 발생기를 개발하였다. 개발된 발생기는 모의표적신호에 고각 정보를 모의할 수 있는 기능을 갖추었고, 내부에 구상변조 기능을 가지고 있어 80MHz까지의 변조된 신호를 발생할 수 있다. 또한 기저대역신호를 외부에서 입력받아 중간주파수로 변환하는 과정을 보드 내에서 처리가 가능하므로 다양한 시험환경을 쉽게 구현할 수 있고 별도의 파형합성기가 필요 없어 저렴한 비용으로 레이다 시험장비 구성이 가능하다. 아울러 운용프로그램에 따라 쉽게 파라미터를 변경할 수 있는 충분한 메모리를 내장하고 있어 시험환경을 변경할 필요가 있을 때 시간 및 비용을 절감할 수 있다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.563-567
• /
• 2016

In this paper, the chaos-based secure scheme for power line communication is proposed for the first time. A digitalized chaotic generator based Lorenz system is utilized for generating nonlinear dynamic chaotic signal for masking the information signal instead of reported analog chaotic generators. A simple method of encryption and decryption is also given. In order to confirm the feasibility of the proposed scheme, the system is simulated using a simplified encryption/decryption method in Proteus. The gained results from simulation demonstrated that by using the chaos-based security method, the data can be encrypted and easily transmitted through the power line network efficiently.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.26-30
• /
• 2006

For the purpose of developing capacitive humidity sensor having interdigital electrodes, interdigital electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thickness. For the development of ASIC, switched capacitor signal processing circuits for capacitive humidity sensor were designed and simulated by Cadence using $0.25{\mu}m$ CMOS process parameters. The signal processing circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control. The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is $0.4%R.H./^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of $3%R.H.{\sim}98%R.H.$. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigital electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.88-91
• /
• 2011

Steam generator tubes (SGTs) in nuclear power plants (NPPs) are a boundary between the primary side generating heat by nuclear fission and the secondary side generating electric power by a turbine. The water inside the SGT is high temperature and high pressure. Therefore, defects and magnetic phases (MPs) are partly produced in non-magnetic SGT by high stresses and temperatures. This causes trouble regarding the safety of SGTs but it is difficult to detect the MP using the conventional eddy current technique (ECT). In particular, a circumferential defect (CD) and circumferential magnetic phase (CMP) cannot detected by ECT. Consequently, a new method is needed to detect CDs and CMPs in SGT. A new U-type yoke with two types of coils was designed and the reactance signal by the CMPs and CDs in the SGT material was simulated.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권5호
• /
• pp.622-628
• /
• 1999

This paper presented to design a robust turbo-generator control system using {{{{ { H}_{$\infty$ } }}}} control synthesis for improving small-signal stability. Application study of{{{{ { H}_{$\infty$ } }}}} control synthesis is more appropriate in this system since a turbo-generator system is usually operated under circumstance of unmeasurable modelling uncertainty and external disturbance. The{{{{ { H}_{$\infty$ } }}}} control theory was briefly reviewed for good understanding and the reasonable approach. The design results are simulated for a case study and to check the system performance in comparison with currently operating Lead/Lag filtered PSS performance.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.965-971
• /
• 1999

This paper presented to design the power system stabilizer(PSS) for a turbo-generator system using LQG/LTR control synthesis for improving small-signal stability. Application study of LGG/LTR control synthesis is more appropriate in this system since a turbo-generator system is usually operated under circumstance of unmeasurable uncertainties and external disturbance. The LQG/LTR control theory was briefly reviewed for good understanding and the reasonable design approach. The design results are simulated for a case study and to check the system performance in comparison with currently operating lead-lag filtered PSS performance.