• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.518-521
• /
• 2003

LCA (Life Cycle Assessment), that unifies the scale of various environmental impacts, and simulated annealing are applied to optimizing electrolysis of wastewater from PCB (Printed Circuit Board) production. The changes of environmental impact can be quantified with LCA and the total changes of environmental impacts can be expressed as a function of power consumed, Cu recycled, $Cl_2$, NOx and SOx discharged through restriction of feasible reactions. In a single-variate condition, the environmental optimum can be easily obtained through plotting and comparing each environmental impact value. In 8V potentiostatic electrolysis, the lowest environmental impact can be achieved after 90min. To optimize a multi-variate conditional system, simulated annealing can be applied and this can give the quick and near optimum in complex systems, where many input and output materials are involved, through experimentally measured values without a theoretical modeling.

• International Journal of Concrete Structures and Materials
• /
• 제5권1호
• /
• pp.19-28
• /
• 2011

This paper documents an experimental study of dynamic response of reinforced concrete beams following instantaneous removal of a bearing column. Four half-scale specimens representing two-span beam bridging across the removed column were tested. The test boundary conditions simulated rotational and longitudinal restraints imposed on a frame beam by the neighboring structural components. The gravity loads were simulated by attaching mass blocks on the beams at three locations. Dynamic loading effects due to sudden removal of a column were simulated by quickly releasing the supporting force at the middle of the specimens. The experimental study investigated the load-carrying capacity of beams restrained longitudinally at the boundaries and dynamic impact on forces. The tests confirmed the extra flexural strength provided by compressive arch action under dynamic loading. The tests also indicated that the dynamic amplification effects on forces were much lower than that assumed in the current design guideline for progressive collapse.

• 한국레이저가공학회지
• /
• 제2권2호
• /
• pp.8-17
• /
• 1999

This study includes a basic feature of laser surface alloying for enhancing the surface properties of materials. Effects of laser processing parameters such as beam power, beam size, scanning speed on the shape and composition of alloyed layer was simulated in case of moving beam conditions (2-dimensional numerical methods). Simulated results were compared with experiments, in which the plasma coating of 80% Ni ＋ 20% Cr deposited on the SS41 substrate was remelted with CO2 laser with Gaussian energy distribution. Simulation and experiments revealed that the shape (dimension)and composition of laser alloyed layer were strongly dependent upon the process parameters, especially interaction time (travel speed) as compared to beam diameter, beam power and absorptivity. The shape and composition of alloyed layervaried more or less exponentially with parameters.

• 소성∙가공
• /
• 제19권5호
• /
• pp.273-276
• /
• 2010

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• 분석과학
• /
• 제8권4호
• /
• pp.745-751
• /
• 1995

In this paper, several simulated devices were constructed for determining components of organic vapors emitting from decorative materials, daily use chemicals and from common behavior of human beings, such as smoking and cooking. The VOCs were preconcentrated on activated carbon and then desorbed by carbon disulphide. The results were obtained by GC/MS analysis and computer searching. It can be concluded that the categories of the sources and the components of organic vapors in indoor air are very complicated, and different sources of VOCs in indoor air have their own emission characteristics.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.579-579
• /
• 2003

I. Objectives The aim of this study was to evaluate and compare the effectiveness of sealer placement in simulated root canal extensions using the K file, ultrasonic file, lentulo spiral and EZ-Fill. II. Materials and Methods Forty resin blocks were attained from cutting Endo-training Bloc with diamond saw. In each parallelepiped block, the simulated root canal was made with ＃20, 08taper GT file. After each block was longitudinally split into two halves using mallet and chisel, a standardized groove of 4mm in length, located 2mmapart from the root apex, was prepared on one wall of two halves using the custom-made knife to simulate the canal extensions with various irregularities.(omitted)

• International journal of advanced smart convergence
• /
• 제10권1호
• /
• pp.159-165
• /
• 2021

Electronic devices used in the mobile environments fabricated under the plasma conditions in high vacuum system. Especially for the development of advanced electronic devices, high quality plasma as the process conditions are required. For this purpose, the variable conductance throttle valves for controllable plasma employed to the high vacuum system. In this study, we analyzed the effects of throttle valve applications on vacuum characteristics simulated to obtain the optimum design modelling for plasma conditions of high vacuum system. We used commercial simulator of vacuum system, VacSim(multi) on this study. Reliability of simulator verified by simulation of the commercially available models of high vacuum system. Simulated vacuum characteristics of the proposed modelling agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve schematized as the modelling of throttle valve for the constant process-pressure of below 10-3 torr. Simulation results plotted as pump down curve of chamber, variable valve conductance and conductance logic of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably in plasma process.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.79-85
• /
• 2005

수산화아파타이트 상용분말을 $1000{\sim}1350^{\circ}C$ 온도범위에서 2시간 동안 공기 중에서 하소한 다음, pH 7.4인 유사 생체용액에 넣고 $37^{\circ}C$에서 3일 또는 7일간 침적실험을 행하였다. 열분해에 따른 수산화아파타이트 분말의 용해 거동은 XRD, FTIR, TEM을 이용해 비교분석 하였다. $1200^{\circ}C$에서 하소된 수산화아파타이트 분말은 격자 내 $OH^-$ 이온들의 탈수로 인하여 OHAP(oxyhydroxyapatite, ($Ca_{10}(PO_4)_6O_x(OH)_{2-2x}$)로 전이하였다. $1350^{\circ}C$에서 수산화아파타이트 분말 일부가 ${\alpha}-TCP$(${\alpha}-tricalcium$ phosphate)와 TTCP (tetracalcium phosphate)로 열분해 되었다. 수산화아파타이트 분말의 열분해로 인해 생성된 ${\alpha}-TCP$, TTCP 및 비화학양론조성의 OHAP 조성들이 수산화아파타이트 분말의 표면용해를 진전시켰다.

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.55-61
• /
• 2016

Recently developed ferritic heat resistance steel, T24 was used to evaluate microstructure characteristics of simulated heat affected zone. Also, correlation between the prior austenite grain size and amount of $M_{23}C_6$ carbide dissolution was discussed. With the increasing of peak temperature, Grain size steadily increased up to $1050^{\circ}C$ and then rapidly increased at $1150^{\circ}C$. Of the peak temperature $950{\sim}1050^{\circ}C$, amounts of $M_{23}C_6$carbide dissolution are low. But Most of $M_{23}C_6$ carbide that is inhibited grain growth were dissolved above $1050^{\circ}C$ and decreased volume fraction of carbide. This indicates that grain growth may be achieved through dissolution of carbide in the base material. As of welding, due to very rapid heating rate, $M_{23}C_6$ carbide exists above equilibrium solution temperature that is $800^{\circ}C$, even at $1050^{\circ}C$. So, It was confirmed that close correlation between carbide dissolution in the base material and grain growth. Calculated grain size has a linear relationship with peak temperature, on the other hand, measured grain size discontinuously increased between $950{\sim}1050^{\circ}C$ and above $1050^{\circ}C$. Grain size of heat affected zone at $1350^{\circ}C$ peak temperature showed maximum 67um and minimum 4um. Also, The number of side showed 3 to 10.

• 환경생물
• /
• 제22권4호
• /
• pp.494-500
• /
• 2004

In order to investigate the effect on morphology of Rhizopus oryzae and production of lactic acid, various interface materials were used. Morphology of fungal showed sheet and flock when resin was added. The production of lactic acid was increased dramatically when interface materials were added. Furthermore, the effect of resin was more significant than that of others. It was assumed that interface materials could absorb substrate and microorganism together, so microorganism was not inhibited by substrate. The effect of static electric field on the interface culture was studied. When the exerting potential was 6.78 voltage, the biomass y was obviously higher than that of zero voltage. A simulated gas-solid interface system was developed to study the growth and two phases model for the growth of Rhizopus oryzae was build up that depended on the symmetric branching theory. An important parameter F was researched. The results indicated that the value of F had obvious difference at exponential and deceleration period, respectively.