• Title/Summary/Keyword: Simplified Design Method

Search Result 698, Processing Time 0.027 seconds

Effect of Tai-Chi on Grip Power, Pain and Fear of Falling in Elderly Person (태극권이 노인의 악력, 통증과 낙상공포에 미치는 효과)

  • Oh, Chung-uk
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.5
    • /
    • pp.631-636
    • /
    • 2016
  • The purpose of this study was to test the effects of Tai Chi exercises on the grip power, pain and fear of falling in elderly persons. A quasi-experimental design was used. This study included 37 subjects who were living in C city. The subjects were divided into the experiment group (n=18) trained in the Tai Chi technique for 6 weeks and the control group (n=19). The experimental group practiced the 24 posture simplified form of Tai Chi for 6 weeks (5 times per day for 60 minutes each time). The effect of the treatment was measured by determining the grip power, pain and fear of falling before and after the 6 weeks of intervention. The experimental group showed a significant increase in grip power (P<0.001) and decrease in pain (P<0.001) compared to the control group. The fear of falling in the experimental group decreased significantly (P<0.002). Tai Chi exercises may be an effective intervention to prevent falling. The Tai Chi technique would therefore be a good method of improving the pain and body health index in elderly persons.

Design of Synchronous 256-bit OTP Memory (동기식 256-bit OTP 메모리 설계)

  • Li, Long-Zhen;Kim, Tae-Hoon;Shim, Oe-Yong;Park, Mu-Hun;Ha, Pan-Bong;Kim, Young-Hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.7
    • /
    • pp.1227-1234
    • /
    • 2008
  • In this paper is designed a 256-bit synchronous OTP(one-time programmable) memory required in application fields such as automobile appliance power ICs, display ICs, and CMOS image sensors. A 256-bit synchronous memory cell consists of NMOS capacitor as antifuse and access transistor without a high-voltage blocking transistor. A gate bias voltage circuit for the additional blocking transistor is removed since logic supply voltage VDD(=1.5V) and external program voltage VPPE(=5.5V) are used instead of conventional three supply voltages. And loading current of cell to be programmed increases according to RON(on resistance) of the antifuse and process variation in case of the voltage driving without current constraint in programming. Therefore, there is a problem that program voltage can be increased relatively due to resistive voltage drop on supply voltage VPP. And so loading current can be made to flow constantly by using the current driving method instead of the voltage driving counterpart in programming. Therefore, program voltage VPP can be lowered from 5.9V to 5.5V when measurement is done on the manufactured wafer. And the sens amplifier circuit is simplified by using the sens amplifier of clocked inverter type instead of the conventional current sent amplifier. The synchronous OTP of 256 bits is designed with Magnachip $0.13{\mu}m$ CMOS process. The layout area if $298.4{\times}314{\mu}m2$.

A Study on the Excavated Sab(a funeral fan) from Lime-filled Tomb and Lime-layered Tomb during the Joseon Dynasty (조선시대 회격·회곽묘 출토 삽(翣)에 대한 고찰)

  • Yi, Seung Hae;An, Bo Yeon
    • Korean Journal of Heritage: History & Science
    • /
    • v.41 no.2
    • /
    • pp.43-59
    • /
    • 2008
  • Sap(?, a funeral fan) is a funeral ceremonial object used in association with a Confucian ceremonial custom, which was crafted by making a wooden frame, attaching a white cloth or a thick paper onto it, drawing pictures on it, and making a holder for a handle. According to Liji(Records of Rites), Sap was used since the Zhou Dynasty, and these Chinese Sap examples are no big different than the Korean Sap examples, which were described in Joseon Wangjo Sillok(Annals of the Joseon Dynasty), Gukjo Oryeui(the Five Rites of the State), and Sarye Pyeollam(Handbook on Four Rituals). This study explored Sap excavated in lime-filled tombs and lime-layered tombs of aristocrats dating back to Joseon, as well as their historical records to examine Sap's characteristics according to their examples, manufacturing methods, and use time. The number and designs of Sap varied according to the deceased' social status aristocrats used mainly one pair of 亞-shaped Bulsap, and a pair of Hwasap with a cloud design depicted on it. A Sap was wrapped twice with Chojuji paper or Jeojuji paper, and for the third time with Yeonchangji paper. Then, it was covered with a white ramie, a hemp, a cotton, a silk satin, etc. Bobul(an axe shape and 亞-shape design) was drawn on both sides of Sap, and a rising current of cloud was drawn at the peripheral area mainly with red or scarlet pigments. Sap, which were excavated from aristocrats'lime-filled and lime-layered tombs, are the type of Sap which were separated from its handle. These excavated Sap are those whose long handles were burnt during the death carriage procession, leaving Sap, which later were erected on both sides of the coffin. The manufacturing process of excavated relics can be inferred by examining them. The excavated relics are classified into those with three points and those with two points according to the number of point. Of the three-point type(Type I), there is the kind of relic that was woven into something like a basket by using a whole wood plate or cutting bamboo into flat shapes. The three-point Sap was concentrated comparatively in the early half of Joseon, and was manufactured with various methods compared with its rather unified overall shape. In the meantime, the two-point Sap was manufactured with a relatively formatted method; its body was manufactured in the form of a rectangle or a reverse trapezoid, and then its upper parts with two points hanging from them were connected, and the top surface was made into a curve(Type II) or a straight line(Type III) differentiating it from the three-point type. This manufacturing method, compared with that of the three-point type, is simple, but is not greatly different from the three-point type manufacturing method. In particular, the method of crafting the top surface into a straight line has been used until today. Of the examined 30 Sap examples, those whose production years were made known from the buried persons'death years inscribed on the tomb stones, were reexamined, indicating that type I was concentrated in the first half of the $16^{th}$ century. Type II spanned from the second half of the $16^{th}$ century to the second half of the $17^{th}$ century, and type III spanned from the first half of the $17^{th}$ century to the first half of the $18^{th}$ century. The shape of Sap is deemed to have changed from type I to type II and again from type II to type III In the $17^{th}$ century, which was a time of change, types II and III coexisted. Of the three types of Sap, types II and III re similar because they have two points; thus a noteworthy transit time is thought to have been the middle of the $16^{th}$ century. Type I compared with types II and III is thought to have required more efforts and skills in the production process, and as time passed, the shape and manufacturing methods of Sap are presumed to have been further simplified according to the principle of economy. The simplification of funeral ceremonies is presumed to have been furthered after Imjinwaeran(Japanese invasion of Joseon, 1592~1598), given that as shown in the Annals of King Seonjo, state funerals were suspended several times. In the case of Sap, simplification began from the second half of the $16^{th}$ century, and even in the $18^{th}$ century, rather than separately crafting Sap, Sap was directly drawn on the coffin cover and the coffin. However, in this simplification of form, regulations on the use of Sap specified in Liji were observed, and thus the ceremony was rationally simplified.

A Study on the Fatigue Strength of the Welded Joints in Steel Structures(II) (강구조물(鋼構造物)의 용접연결부(鎔接連結部)의 피로강도(疲勞强度)에 관한 연구(研究)(II))

  • Park, Je Seon;Chung, Yeong Wha;Chang, Dong Il
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.6 no.1
    • /
    • pp.1-11
    • /
    • 1986
  • Welded connectors of the cover plates, the transverse stiffeners of the plate girders, and the gusset plates of the plates girders or box girders, were selected as studying objects. A simplified method of drawing the S-N curves in these welded joints by a computer program without the direct fatigue tests was established. The plots on the S-N curve using the values from the practical fatigue tests were compared with the results from the method of the computer programming. The results of these studies are as follows. It appeared that the fatigue life by calculation method was a little less than the practical fatigue life from the actual tests. The latter values included both life $N_c$ of occurrence of initial crack $a_i$ and the life $N_p$ of propagation of critical crack. On the other hand, the former values included only the life $N_p$. Therefore, these results should be considered as justifiable ones. Since the difference between the two results was not significant, the results by calculation method should be in the conservation side when the safety of the structures was considered. Consequently, the results by calculation method should be applicable to the fracture fatigue design of structure. For reference, the same fatigue tests were performed with the specimens of 3 pieces in each case made of the low-strength steel, SS 41. The results went unexpected showing that the fatigue strength was lower in the case of low-strength steel. That is, in the case of the cover plate, the fatigue strength became slowly higher than the case of high-strength steel, SWS 50. That was observed when the maximum testing stress was higher than $14kg/mm^2$. In addition, in the case of the transverse stiffener, the fatique strength became rapidly higher than the case of SWS 50. That was observed when the maximum testing stress was lower than $31kg/mm^2$. It was thought that more such fatigue tests should be performed for more reliable results.

  • PDF

Dynamic Characteristic Analysis Procedure of Helicopter-mounted Electronic Equipment (헬기 탑재용 전자장비의 동특성 분석 절차)

  • Lee, Jong-Hak;Kwon, Byunghyun;Park, No-Cheol;Park, Young-Pil
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.23 no.8
    • /
    • pp.759-769
    • /
    • 2013
  • Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

A Study of Feasibility of Dipole-dipole Electric Method to Metallic Ore-deposit Exploration in Korea (국내 금속광 탐사를 위한 쌍극자-쌍극자 전기탐사의 적용성 연구)

  • Min, Dong-Joo;Jung, Hyun-Key;Park, Sam-Gyu;Chon, Hyo-Taek;Kwak, Na-Eun
    • Geophysics and Geophysical Exploration
    • /
    • v.11 no.3
    • /
    • pp.250-262
    • /
    • 2008
  • In order to assess the feasibility of the dipole-dipole electric method to the investigation of metallic ore deposit, both field data simulation and inversion are carried out for several simplified ore deposit models. Our interest is in a vein-type model, because most of the ore deposits (more than 70%) exist in a vein type in Korea. Based on the fact that the width of the vein-type ore deposits ranges from tens of centimeters to 2m, we change the width and the material property of the vein, and we use 40m-electrode spacing for our test. For the vein-type model with too small width, the low resistivity zone is not detected, even though the resistivity of the vein amounts to 1/300 of that of the surrounding rock. Considering a wide electrode interval and cell size used in the inversion, it is natural that the size of the low resistivity zone is overestimated. We also perform field data simulation and inversion for a vein-type model with surrounding hydrothermal alteration zones, which is a typical structure in an epithermal ore deposits. In the model, the material properties are assumed on the basis of resistivity values directly observed in a mine originated from an epithermal ore deposits. From this simulation, we can also note that the high resistivity value of the vein does not affect the results when the width of the vein is narrow. This indicates that our main target should be surrounding hydrothermal alteration zones rather than veins in field survey. From these results, we can summarize that when the vein is placed at the deep part and the difference of resistivity values between the vein and the surrounding rock is not large enough, we cannot detect low resistivity zone and interpret the subsurface structures incorrectly using the electric method performed at the surface. Although this work is a little simple, it can be used as references for field survey design and field data Interpretation. If we perform field data simulation and inversion for a number of models and provide some references, they will be helpful in real field survey and interpretation.

An analysis of horizontal deformation of a pile in soil using a beam-on-spring model for the prediction of the eigenfrequency of the offshore wind turbine (해상풍력터빈의 고유진동수 예측을 위한 지반에 인입된 파일의 탄성지지보 모델 기반 수평 거동 해석)

  • Ryue, Jungsoo;Baik, Kyungmin;Kim, Tae-Ryong
    • The Journal of the Acoustical Society of Korea
    • /
    • v.35 no.4
    • /
    • pp.261-271
    • /
    • 2016
  • In the prediction of response of a pile in soil, numerical approaches such as a finite element method are generally applied due to complicate nonlinear behaviors of soils. However, the numerical methods based on the finite elements require heavy efforts in pile and soil modelling and also take long computing time. So their usage is limited especially in the early design stage in which principal dimensions and properties are not specified and tend to vary. On the contrary, theoretical approaches adopting linear approximations for soils are relatively simple and easy to model and take short computing time. Therefore, if they are validated to be reliable, they would be applicable in predicting responses of a pile in soil, particularly in early design stage. In case of wind turbines regarded in this study, it is required to assess their natural frequencies in early stages, and in this simulation the supporting pile inserted in soil could be replaced with a simplified elastic boundary condition at the bottom end of the wind turbine tower. To do this, analysis for a pile in soil is performed in this study to extract the spring constants at the top end of the pile. The pile in soil can be modelled as a beam on elastic spring by assuming that the soils deform within an elastic range. In this study, it is attempted to predict pile deformations and influence factors for lateral loads by means of the beam-on-spring model. As two example supporting structures for wind turbines, mono pile and suction pile models with different diameters are examined by evaluating their influence factors and validated by comparing them with those reported in literature. In addition, the deflection profiles along the depth and spring constants at the top end of the piles are compared to assess their supporting features.

A Study on Modern People's Consciousness and Wearing Practice of Korean Costumes (우리나라 옷에 대한 현대인(現代人)의 의식(意識)과 춘용실태(春用實態)에 관(關)한 연구(硏究) - 서울 지역(地域)을 중심(中心)으로 -)

  • Hwang, Chun-Sub
    • Journal of the Korean Society of Costume
    • /
    • v.1
    • /
    • pp.119-129
    • /
    • 1977
  • It is significant for developing the future for us to know our present age. In order to preserve our Korean costume as a fola clothes retaining our distinguished independent characterisitics and to help design the tomorrow of our Korean costume playing a role as a racial to develop the world clothing culture, a survey was conducted to investigate modern people's conscious-ness and wearing practumes of Korean costume by questionaire and interviewing methods. The results of the survey were analyzed as follows: (1) At present, Korean costumes were purchased as customtailored(64.0%) and as ready-made(17.8%) and most of them were not made at individual homes. The laundry and ironing of them were carried out at laundry shops(68.8%). Considering our present economic, social and cultural aspects, sowing, laundryand ironing will not be carried out at homes again in the future and ready made costumes seen to be produced in a large scale in the future. Garment makers and laundry shop operators should be trained how to make our Korean costumes retain our traditional beauty in the course of their production and laundry and the makers of ready-made costumes must make research how to efficiently produce ideal ready-made costumes by adopting the synchro system in their wrk odisivion. (2) The age group wearing Korean costumes most frequently was the aged people over 60 (their wearing rate; 45%-50%) and the group wearing them most frequently next io the aged people over 60, was housewives(their wearing rate; 15%-20%). Excludign aged people and housewives, other respondentsdid not wear Korean costumes very frequently. Men's wearing rate was lower their wearing rate was the younger their ages were and the less their monthly incomes were. Korean costumes were used for holiday and festival(60%), wedding and funeral ceremonies (52%), visiting and working(22%), casual wear(12.8%) and home wear(9.2%). The use of Korean costumes as casual and home wears, was lower than the use for holday, festival, visiting and working, Under our present circumstances in which our Korean people use both Western style clothes and Korean costumer, our Korean costume has lostits position as a basic and necessary requiement in Korean people's daily life and become a ceremonical and fancy costume. It is natural that the times and life change everything in our daily life. Our costume has to be made as good ceremonial and fancy clothes satisfying modern sensibility according to its new role. In order for us to get close with our clothes, a keen study must be carried out to cleat the color, material, style, function and harmony of the Korean costume matching the of the times. (3) The 47.8% of the respondents answered that they were proud of our Korean costume as our folk clothes, 47.6% replied that thought them just common and 1.1% responded that they were ashamed of it. Most of them were affirmative in feeling pride with our Korean costume. (4) Considering the functional aspect of Korean costumes, their strong points were symetric beauty, rhythmical beauty, unity feeling, harmonical beauty and detailed decorations. Their common shortcomings were lack of individuality and inadequateness for active life. The shortcomings of woman costumes were suppressing breast, making resperation difficult and in adequnteness in summer time. The main reason not to wear our Korean costumes, was due to the fact that they are incomvenient for active life. As a measure to eliminate such shortcomings, 1) the suspension system of skirt to remove the suppression of breast should be generally adopted. 2) they should be simplified in their structure to make them convenient for active life and adepuate in wearing them in hot weather in an extent to which the traditional beauty of the costume may not be lostand 3) a new technique must be explored for showing individuality by wearing method and new arrangment of colors and decorations. (5) The reasons desiring to wear Korean costumes were classifide as follows: A. Korean costumes are our traditional clothes(43.4%). B. Korean costumes are noble and beautiful(26.8%). C. They are accustomed to wear Korean costumes by habit(19.5%). D. Korean costumes are necessary for attending ceremoneis(9.5%). E. Miscellaneous reasons(0.8%). Classifying these reasons into age groups, the high age group over 40 wore them because they were easy to wear by habit and the low age group of 10-30 never thought that they were east to wear by habit. Considering that even those who were accustomed to wear Korean costumes showed a low wearing rate and that the young generation were accustomed to wear Western style clothes rather than Korean costumes, the wearing rate of Korean costumes will be reduced in the future if such trend continues. It is urgent for us to make our best efforts in order to enhance the interest of young generation in Korean costumes and not to make them lose the strong points of Korean costume in the future. (6) Conicering the plan of the respondents on what kind of clothes they were going to wear in the future, among the age group over 50, those who wanted to wear only Korean costumes were 24.8%(men) and 35.1%(women), those who wanted to wear 49.7%(men) and 47.4(women), those who wanted to wear chiefly Western style clothes were 20.7% (men) and 14.4%(women) and those who wanted to wear only Western style clothes, were 2.4% (men) and 2.1%(women). This shows that the general tendency to wear only or chiefly Korean costumes is more prevalent than that to wear only Western style. Among the age group under 50, the tendency to wear Western style clothes was conspicuous and most of the respondent answered that they would wear chiefly Western style clothes and Korean costumes occasionally. Only 5.4% of the respondent answered that they would wear only Western style clothes and this shows that meny respondents still wonted to wear Korean costumes. Those who wanted their descendants to wear what they desire, were 50.1%(men) and 68.8% (women) and those who wanted their descendants to wear Koran costumes occasionally, were 85.8%(men) and 86.3%(women). This shows that most of respondents wanted their descendants to wear Korean costumes. In order to realize, it is necessory for us to make ourdescendants recognize the preciousness of our traditional culture and modify our Korean costumes according to their taste so that they may like wearing them.

  • PDF