• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2946-2951
• /
• 2008

Combustion instability is a major issue in design of gas turbine combustors for efficient operation with low emissions. Combustion instability is induced by the interaction of the unsteady heat release of the combustion process and the change in the acoustic pressure in the combustion chamber. In an effort to develop a technique to predict self-excited combustion instability of gas turbine combustors, a new stability analysis method based on the transfer matrix method is developed. The method views the combustion system as a one-dimensional acoustic system with a side branch and describes the heat source as the input to the system. This approach makes it possible to use the advantages of not only the transfer matrix method but also well-established classic control theories. The approach is applied to a simple gas turbine combustion system to demonstrate the validity and effectiveness of the approach.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1449-1457
• /
• 2009

Combustion instability is a major issue in design of co-generation gas turbine combustors for efficient operation with low emissions. Combustion instability is induced by the interaction of the unsteady heat release of the combustion process and the change in the acoustic pressure in the combustion chamber. In an effort to develop a technique to predict self-excited combustion instability of co-generation gas turbine combustors, a new stability analysis method based on the transfer matrix method is developed. The method views the combustion system as a one-dimensional acoustic system with a side branch and describes the heat source as the input to the system. This approach makes it possible to use not only the advantages of the transfer matrix method but also well established classic control theories. The approach is applied to a simple co-generation gas turbine combustion system, which shows the validity and effectiveness of the approach.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.129-135
• /
• 1995

This study aims to compare the heat release calculated using the ensemble average of pressure data with the heat release calculated using the least squares method for pressure data. This paper propose a heat release computation method that can analyze the most correct, straight and simple method to analyse combustion phenomenon. In conclusion, we found that the least squares method of third-order was the best computational method for heat release calculation.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.414-417
• /
• 2011

Indium tin oxide (In:$SnO_2$) nanoparticles were synthesized employing a sol-gel combustion method followed by annealing. The TG, XRD, XPS and SEM results of the precursor powders and calcinated In:$SnO_2$ nanoparticles were investigated. Crystal structures were examined by powder XRD, and those results show shaper intensity peak at $25.6^{\circ}$ ($2{\theta}$) of $SnO_2$ by increased annealing temperature. A particle morphology and size was examined by SEM, and the size of the nanoparticles was found to be in the range of 20~30nm. In:$SnO_2$ films could controlled by nanoparticle material at various annealing temperature. The sol-gel combustion method was offered simple and effective route for the synthesis of In:$SnO_2$ nanoparticles.

• Journal of Korean Elementary Science Education
• /
• v.19 no.2
• /
• pp.15-27
• /
• 2000

The purpose of this study was to survey the thinking of children, preliminary elementary teachers and elementary teachers in relation to the experiment of candle's combustion in a bottle on the water, to develop some supplementary experiments for the correction of the misconception on this experiment and to propose a new teaching method for this subject-matter The results of this study can be summarized as follows. 1. Most of the answers are related to the simple observation as the extinguishing of candlelight and the water rising in the bottle after a candle's combustion. And it is appeared that all the groups are similarly short of the ability of experimental design to verify the cause and effect. 2. from the results of the developed supplementary experiments, it is concluded that the main cause of the water rising is not the combustion of oxygen, but the expansion of volume and the releasing of air in the bottle in the bottle by heat of candle's combustion. 3. Based on the above results, a new direction for the teaching method of this subject is proposed.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.615-618
• /
• 2010

An oxygen bomb combustion procedure were studied for determination of heavy metal in polymer materials such as polyvinyl chloride and polypropylene by ICP-AES. This method is proposed as a rapid and simple sample preparation for decomposition of polymer containing certified contents of the analytes by teflon coated oxygen bomb combustion using different absorbing solution. The recoveries of metal were found to be 30~102% from absorbed solution by ICP-AES method using polypropylene certified reference material(PP CRM-As, Ba, Cd, Hg, Pb, Zn). The recoveries of metal using PVC CRM(Cd, Hg, Pb) was found to be 45 ~101% with same procedures.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.5
• /
• pp.28-32
• /
• 2003

Europium-doped gadolinium oxide ($Gd_2O_3;Eu^{3+}$) phosphors have been prepared by combustion method using urea[H$_2$NCONH$_2$] or carbohydrazide[H$_2$NNHCONHNH$_2$] as fuel materials in a preheated furnace at 500$^{\circ}C$. The phosphors obtained were fired at 1200$^{\circ}C$ for 3 hours to get better luminescent properties. The combustion method used was found to be a simple and fast method for the preparation of fine-sized particles. The influence of the fuel/oxidant (urea or carbohydrazide/nitrate) mole ratio on the phosphor has been investigated and the optimum values for various parameters have been determined. By this method, phosphor that has better brightness and smaller size particles than that obtained by conventional method has been prepared.d has been prepared.

• Korean Journal of Materials Research
• /
• v.25 no.9
• /
• pp.492-496
• /
• 2015

Hydroxyapatite (HA), which is an important calcium phosphate mineral, has been applied in orthopedics, dentistry, and many other fields depending upon its morphology. HA can be synthesized with different morphologies through controlling the synthesis method and several parameters. Here, we synthesize various morphologies of HA using two simple methods: hydrothermal combustion and solution combustion. The phase purity of the synthesized HA is confirmed using X-ray diffractometry. It demonstrates that pure phased hydroxyapatite can be synthesized using both methods. The morphology of the synthesized powder is examined using scanning electron microscopy. The effects of pH and temperature on the final powder are also investigated. At $140^{\circ}C$, using the hydrothermal method, nano-micro HA rods with a hexagonal crystal structure can be synthesized, whereas using solution combustion method at $600^{\circ}C$, a dense cubic morphology can be synthesized, which exhibits monoclinic crystal structures.

• YAKHAK HOEJI
• /
• v.13 no.2_3
• /
• pp.84-87
• /
• 1969

Microanalysis of organic sulfur compounds by means of combining thin layer chromatography and oxygen combustion flask method was attempted. The following procedure was found to be very simple and to give accurate results. The mixture of sulfa drugs was separated with T.L.C., and it was burned in a flask filled with oxygen, and the gas formed was absorbed in a dilute solution of sodium hydroxide. The solution was neuralized with hydrochloric acid and heated in a water bath. The sulfate ion formed was then treated with barium chromate solution and its absorbancy at 370 m.mu. was measured.

• Journal of the Korean Society of Safety
• /
• v.8 no.3
• /
• pp.13-18
• /
• 1993

This paper an application method of crankshaft of four cylinder internal combustion engine for studying stress analysis of the shaft. For simple analysis, uniform sections of journal, pin and arm parts were assumed. Transfer Metrix Method was used, considering branched part and coordinate transformation part. Bending, twisting moment and stresses of crank shaft were investigated.