• 설비공학논문집
• /
• 제29권10호
• /
• pp.515-529
• /
• 2017

EnergyPlus, which is widely used in various fields, provides Simple Window Model, a window model that can be used practically. However, the results of building load using the model are different from those of the standard model. The main cause of the deviation by Simple Window Model was analyzed to be due to the assumption that all windows were considered as single layer. The purpose of this study is to propose a window model that improves the cause of deviation by Simple Window Model and can be easily calculated from the algebraic relations. The proposed window model solved the heat balance equation algebraically by using seven window characteristic coefficients. The coefficient relationships consisted of the heat transmission coefficient and solar heat gain coefficient as input parameters make practical use and calculation possible. As a result of comparing the deviation between each window model by implementing the dynamic analysis method, the proposed window model showed that the deviation of the total heating/cooling energy consumption was reduced to 1/3 compared to Simple Window Model for one year. Although the maximum energy consumption did not show any significant improvement, the indoor temperature evaluation showed significantly reduced deviation.

• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.235-244
• /
• 2004

There have been a lot of approaches to evaluate and predict transmission control protocol (TCP) performance in a numerical way. Especially, under the recent advance in wireless transmission technology, the issue of TCP performance over wireless links has come to surface. It is because TCP responds to all packet losses by invoking congestion control and avoidance algorithms, resulting in degraded end-to-end performance in wireless and lossy systems. By several previous works, although it has been already proved that overall TCP performance is largely dependent on its loss recovery performance, there have been few works to try to analyze TCP loss recovery performance with thoroughness. In this paper, therefore, we focus on analyzing TCP's loss recovery performance and have developed a simple model that facilitates to capture the TCP sender's behaviors during loss recovery period. Based on the developed model, we can derive the conditions that packet losses may be recovered without retransmission timeout (RTO). Especially, we have found that TCP Reno can retransmit three packet losses by fast retransmits in a specific situation. In addition, we have proved that successive three packet losses and more than four packet losses in a window always invoke RTO easily, which is not considered or approximated in the previous works. Through probabilistic works with the conditions derived, the loss recovery performance of TCP Reno can be quantified in terms of the number of packet losses in a window.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.543-543
• /
• 2000

A new method for HRV(heart rate variability) detection from the R-wave signal, based on the IPFM(integral pulse frequency modulation) model and its similarity to pulse position modulation, is presented. The proposed method exert lowpass filtering with a Kaiser window. In this paper, The proposed method presents a powerful, but simple, tool for investigation of HRV. It also guarantees real-time behavior. simplicity in design, and phase linearity. Even without the basic assumption of IPFM model. the new algorithm can still be used on-line and with higher performance. It is thoroughly proved that lowpass filtering is an ideal method for PSD(Power Spectrum Density) analysis of HRV.

• Journal of Communications and Networks
• /
• 제12권1호
• /
• pp.43-51
• /
• 2010

IEEE 802.11 defines distributed coordination function (DCF), which is characterized by CSMA/CA and binary exponential backoff (BEB) algorithm. Most modifications on DCF so far have focused on updating of the contention window (CW) size depending on the outcome of own frame transmission without considering freezing periods experienced in the backoff interval. We propose two simple but novel schemes which effectively utilize the number of freezing periods sensed during the current backoff interval. The proposed schemes can be applied to DCF and its family, such as double increment double decrement (DIDD). Saturation throughput of the proposed schemes is analyzed by means of Bianchi's Markovian model. Computer simulation validates the accuracy of the analysis. Numerical results based on IEEE 802.11b show that up to about 20% improvement of saturation throughput can be achieved by combining the proposed scheme with conventional schemes when applied to the basic access procedure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3233-3235
• /
• 2000

A new method for HRV(heart rate variability} detection from the R-wave signal, based on the IPFM (integral pulse frequency modulation) model and its similarity to pulse position modulation, is presented. The proposed method exert lowpass filtering with a Kaiser window. In this paper, The proposed method presents a powerful, but simple, tool for investigation of HRV. It also guarantees real-time behavior, simplicity in design, and phase linearity. Even without the basic assumption of IPFM model, the new algorithm can still be used on-line and with higher performance. It is thoroughly proved that lowpass filtering is an ideal method for PSD (Power Spectrum Density) analysis of HRV.

• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.748-751
• /
• 2013

본 논문은 유한 차분 시간 영역(FDTD: Finite-Difference Time-Domain)법을 이용하여 간단한 건물 구조의 광대역 복사성 펄스 결합에 관한 연구를 수행하였다. 이를 위해 건물을 콘크리트와 유리로 구성하였으며, 각 물질의 전기적 특성을 수치적으로 모델링하였다. 본 논문에서는 본 연구팀에서 개발한 분산 FDTD 알고리즘을 이용하여 건물의 전자파 특성 해석을 수행하고, 건물 구조에 따른 차폐 효과를 50 MHz~1 GHz 대역에서 분석하였다.

• Investigative Magnetic Resonance Imaging
• /
• 제19권4호
• /
• pp.212-217
• /
• 2015

Purpose: For a single time-point hyperpolarized $^{13}C$ magnetic resonance spectroscopy imaging (MRSI) of animal models, scan-time window after injecting substrates is critical in terms of signal-to-noise ratio (SNR) of downstream metabolites. Pre-scans of time-resolved magnetic resonance spectroscopy (MRS) can be performed to determine the scan-time window. In this study, based on two-site exchange model, protocol-specific simulation approaches were developed for $^{13}C$ MRSI and the optimal scan-time window was determined to maximize the SNR of downstream metabolites. Materials and Methods: The arterial input function and conversion rate constant from injected substrates (pyruvate) to downstream metabolite (lactate) were precalibrated, based on pre-scans of time-resolved MRS. MRSI was simulated using two-site exchange model with considerations of scan parameters of MRSI. Optimal scan-time window for mapping lactate was chosen from simulated lactate intensity maps. The performance was validated by multiple in vivo experiments of BALB/C nude mice with MDA-MB-231 breast tumor cells. As a comparison, MRSI were performed with other scan-time windows simply chosen from the lactate signal intensities of pre-scan time-resolved MRS. Results: The optimal scan timing for our animal models was determined by simulation, and was found to be 15 s after injection of the pyruvate. Compared to the simple approach, we observed that the lactate peak signal to noise ratio (PSNR) was increased by 230%. Conclusion: Optimal scan timing to measure downstream metabolites using hyperpolarized $^{13}C$ MRSI can be determined by the proposed protocol-specific simulation approaches.

• 산업공학
• /
• 제13권2호
• /
• pp.281-287
• /
• 2000

We studied a model house system on cyberspace using JAVA and VRML in this paper. In the system, users can not only browse the model house using a web browser but also choose options that they want to install in the final house and the chosen options are combined with the figure of the model house on the terminal window in real time. In addition, the information of the chosen options are transferred to a database on a server machine at the construction company and the company can use the information for the customer management. The developed system can be used by a simple EC system since it includes duplex information paths.

• KIEAE Journal
• /
• 제11권1호
• /
• pp.47-55
• /
• 2011

Daylight is highly beneficial for improving the indoor environmental quality and reducing building energy consumption, daylighting applications are scarcely considered, especially during the Rural standard house models design process, because of lack of previous studies on elderly-light environment and complex simulation process. Therefore, daylighting process were performed using ECOTECT, which has various advantage such as easy user interface and simple simulation processes. Moreover, dynamic daylight simulation were performed using whether data. Static simulation are performed to compute static metrics such as daylight factor, whereas dynamic simulation are performed for dynamic metrics such as daylight autonomy and useful daylight illuminance using annual weather data On the basis of daylight autonomy and useful daylight illuminance analysis result, variations in annual daylight performances. A parametric and regression analysis of the window-to-wall ratio and visible transmittance showed that daylight factor, daylight autonomy increased with window-to-wall ratio and visible transmittance. It can be concluded that this new daylight criteria. useful daylight illuminance, will enable architect to obtain better fenestration design.

• 대한전자공학회논문지TC
• /
• 제44권6호
• /
• pp.24-30
• /
• 2007

본 논문에서는 다중경로 임펄스 전파 채널 환경에서 중 저속통신에 적합한 저전력, 저복잡도의 IR-UWB 수신기를 제안하였다. 제안된 수신기는 자승기 및 적분기를 사용하여 복잡한 Rake 구조를 사용하지 않고서도 다중경로 환경 하에서 분산된 임펄스 신호의 에너지를 효과적으로 합산하였다. 또한 임펄스 신호의 검출을 위하여 1-bit Sampler를 사용하여 기존의 고속 병렬 ADC를 대체하였으며 이 과정에서 Sample Rate을 낮추고 BER 손실을 줄이기 위하여 Sampler의 입력으로 수신 신호의 저주파 성분인 포락선을 사용하였고, 샘플 획득 후 디지털 상관기 회로를 추가하였다. 그리고 수신되는 임펄스 마다 심벌 결정구간을 설정하여 이 구간 내에서 임펄스 심벌을 판단하는 구간동기 개념을 사용하였으며, 이로써 임펄스 신호의 동기 조건을 완화시키어 간단한 디지털 동기회로 만으로 정밀한 PLL을 대체할 뿐 아니라 다중 경로 및 timing error 등의 내 외부 환경의 변화에 효과적으로 대응하였다. 제안된 수신기는 IEEE 802.15.4a에서 제안된 채널 모델을 활용하여 그 성능을 모의 검증하였고 FPGA로 구현하여 실제 환경에서 그 성능을 입증하였다.