• 한국안전학회지
• /
• 제24권2호
• /
• pp.76-82
• /
• 2009

The NIOSH lifting equation has been used as a dominant tool in evaluating the hazard levels of lifting tasks. Although it provides two different ways for each simple and complex lifting task, the NIOSH simple lifting equation is almost used for not only simple tasks but also complex tasks. However, most of lifting tasks in industries are in the form of complex lifting. Therefore some errors occur inevitably in the evaluation of complex lifting tasks. Among complex lifting tasks, a multi-stacking task is the most popular in lifting tasks. To compensate the error in the evaluation of multi-stacking tasks by using the NIOSH simple lifting equation, a set of calculations for finding LIs(Lifting Indices) was performed for the systematically varying multi-stacking tasks. Then a regression model which finds the equivalent height in simple lifting task for multi-stacking task was established. By using this model, multi-stacking tasks can be evaluated with less error. To validate this model, some real multi-stacking tasks were evaluated as examples.

• The Journal of Korean Physical Therapy
• /
• 제34권4호
• /
• pp.175-180
• /
• 2022

Purpose: Leg length discrepancy causes the posture deformation, gait asymmetry, and lower back pain. The purpose of this study is to investigate the correlation among functional leg length discrepancy (FLLD), muscle activity, muscle contraction onset time and vertical ground reaction force (vGRF) during simple lifting task. Methods: Thirty-nine subjects participated in this study. FLLD was measured from the umbilicus to medial malleolus of left and right leg using a tape. The subjects performed to lift a 10 kg box from the floor to chest. The muscle activity and muscle contraction onset time of rectus abdominis, erector spinae and rectus femoris was measured using EMG system and vGRF was measured by two force plate. Pearson correlation was used to fine out the correlation among FDDL, muscle activity, muscle contraction onset time and vGRF during simple lifting task. Results: Correlation between FLLD and difference of muscle activity of short-long side was very high (r>0.9) during simple lifting task. Correlation between FLLD and difference of muscle contraction onset time of short-long side was very high (r>0.9) during simple lifting task. And correlation between FLLD and difference of vGRF of short-long side was high (r>0.7) during simple lifting task. Conclusion: This study suggests that there is high correlation between FLLD and muscle activity, muscle contraction onset time, and ground reaction force during simple lifting task. Therefore, FLLD could negatively affect the postural balance.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.622-625
• /
• 2003

본 연구의 목적은 초고층 복합건물 공사에서 마감자재 양중횟수를 산정하는 약산식을 제안하는 것이다. 그것은 양중계획 시 효율적인 데이터로 활용될 것으로 기대된다. 마감자재 양중계획은 건물이 고층화 될 수록 더욱 더 중요해 진다. 양중횟수는 "패키기"라는 방식을 통하여 기존의 방식보다 더욱더 정확하게 산정할 수 일다. "패키지"는 마감자재별 특성을 고려하여 한번에 양중할 수 있는 마감자재별 양중형식을 고려한다는 것을 의미한다. 도출된 약산식은 기준층 바닥면적과 단위면적당 실갯수라는 두 요소를 변수로 하여 도출하였다.

• 대한인간공학회지
• /
• 제29권1호
• /
• pp.145-153
• /
• 2010

Activity of lifting has been a major issue in many research area related in manual materials handling tasks. However, the opposite activity of lifting, lowering, has received much less attention. It is known that 52% of all box-handling tasks were lowering in nature. The difference in stress between lifting and lowering activity is not well understood. A simple assumption that these two activities are very similar has been established and widely used. However, this simple assumption may be questionable. The objective of this study was to compare a lifting activity and a lowering activity based on the three different ergonomic approaches; (1) biomechanical, (2) physiological, (3) psychophysical approach. It was found that the stress of lowering activity was from 65% to 93%, from 87% to 97%, and from 87% to 96% according to the biomechanical, physiological, and psychophysical point of view, respectively. It is concluded from the result of this study that the stress of lowering activity is lower than that of the lifting activity. The maximum compressive force on the lumbro-sacral joint (L5/S1) was 158% and 108% respectively, for lifting and lowering activity of which the work load is the 58% of Action Limit. It is suggested that the NIOSH AL and RWL and biomechanical criteria should be reconsidered especially for the low frequency of lifting activities.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.176-182
• /
• 2005

American Conference of Governmental Industrial Hygienists (ACGIH) adopted the Lifting Threshold Limit Values ($TLVs^{(R)}$) in 2005 as a guideline for protecting the workers from work-related low back and shoulder disorders associated with repetitive lifting tasks. The TLVs consist of three tables with recommended weight limits for lifting tasks and their determination procedures are simple. The TLVs sans the material weight/the recommended values (LITLVs) were obtained from 45 lifting tasks in ship engine manufacturing factories. These values were compared and correlated with the Recommended Weight Limits (RWLs) and lifting indices (LIs) determined by the Revised Lifting Equation (LE) of the National Institute for Occupational Safety and Health (NIOSH). The average ratio, LITLVs/LIs, was 0.8 (LITLVs: $1.3{\pm}0.8$, LIs: $1.6{\pm}0.7$). Thus, the TLVs underestimated the risk than the LE. The LITLVs were highly correlated with LIs (r=0.82). The predicted value of LITLVs when LIs=1 wa 0.76. Using the predicted TLVs the higher risk ones of a large number of tasks can be screened to be further investigated.

• Kyungpook Mathematical Journal
• /
• 제48권1호
• /
• pp.143-154
• /
• 2008

Lomp [9] has studied finitely generated projective modules over semilocal rings. He obtained the following: finitely generated projective modules over semilocal rings are semilocal. We shall give necessary and sufficient conditions for finitely generated modules to be semilocal modules. By using a lifting property, we also give characterizations of right perfect (semiperfect) rings. Our main results can be summarized as follows: (1) Let M be a finitely generated module. Then M has finite hollow dimension if and only if M is weakly supplemented if and only if M is semilocal. (2) A ring R is right perfect if and only if every flat right R-module is lifting and every right R-module has a flat cover if and only if every quasi-projective right R-module is lifting. (3) A ring R is semiperfect if and only if every finitely generated flat right R-module is lifting if and only if RR satisfies the lifting property for simple factor modules.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.43-50
• /
• 2006

The purpose of this study was to investigate applicability of NIOSH lifting equation(NLE) to analysis of workload for patient transferring. In principle, the NLE is not applied to analyzing workload of patient transferring, because 1) the task is generally performed by two or more persons; 2) unlike ordinary objects, human body of patients is basically unstable load with their location of the center of mass significantly varying during lifting activity; and 3) the task is done in a restricted work space. This study was conducted through comparison of NIOSH lifting indexes(LIs) and L5/S1 compressive forces by 3DSSPP for patient transferring tasks performed by 2~6 persons. The results showed that LIs are linearly correlated with L5/S1 compressive forces with correlation coefficient of 0.92, which resulted in a significant simple linear regression equation for LIs and L5/S1 compressive forces. Consequently, it was concluded that the NLE is applicable to transferring patient only with slight modification. Based on the results, instead of 1.0 originally used by NIOSH, the LI of 1.5 was proposed as a gauge to estimate whether or not the task needs corrective action to reduce risk for developing lifting-related low back pain.

• 한국지능시스템학회논문지
• /
• 제25권3호
• /
• pp.223-228
• /
• 2015

본 논문에서는 어떤 물체를 들어 올려서 전달하는 인간의 작업을 대신 수행하기 위한 인간형 로봇 팔의 어깨 및 팔꿈치 관절의 토오크 특성을 분석하고자 한다. 이러한 목적을 달성하기 위하여 인간의 일상적인 물체의 리프팅 행동을 고려하고, 단순한 구조의 어깨와 팔꿈치 관절을 갖는 인간형 로봇 팔 모델을 사용하여 어떤 물체를 다양한 경로로 이송하는 시뮬레이션을 수행한다. 이러한 시뮬레이션을 통하여 인간형 로봇 팔을 이용한 물체의 이송 작업에 있어서 요구되는 어깨 및 팔꿈치 관절의 토오크 패턴 및 범위를 사전에 파악할 수 있음을 보인다. 결과적으로, 이러한 어깨 및 팔꿈치 관절의 토오크 분석은 효과적인 로봇 팔 메커니즘 설계에 유용하게 활용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1015-1018
• /
• 2002

We show how any discrete wavelet transform or two band subband filtering with finite filters can be decomposed onto a finite sequence of simple filtering steps, which we call lifting steps but that are also known as ladder structures, We present a self-contained derivations, building the decomposition from the basic principles such as the Euclidean algorithm, with a focus on a applying it to wavelet filtering. This factorization provides an alternative for the lattice factorization, with the advantage that it can also be used in the bi-orthogonal, i.e, non-unitary case. Lifting leads to a speed-up when compared to the standard implementation. We show that this lifting scheme can be applied in image compression efficiently

• 한국해양공학회지
• /
• 제14권1호
• /
• pp.17-22
• /
• 2000

This study focuses on a simple analytical approach to calculate crane lifting forces for a sunken ship. The method takes into account the relation of lifting forces acting in wire rope slings to the inclination of the vessel including the effect of lug positions. The importance of the sunken ship salvage is explained from the statistics of ship casualties during last 15 years. Euler angles are introduced to represent the inclination of a sunken ship in developing the static force and moment equations,. Three dimensional examples with one redundant degree of freedom for a GT1500 oil tanker are analyzed and the results show that the information obtained by the method could be useful to salvors to conduct salvage work.