• 헤리티지:역사와 과학
• /
• 제46권3호
• /
• pp.230-250
• /
• 2013

동아대학교박물관에 소장된 <초충도수병(草蟲圖繡屛)>(이하 <수병>)은 보물 제595호로 지정되어 있으며 초충도 회화작품보다 더 정교하고 섬세한 사실적 표현과 다채한 입체적 구성으로 미술사 분야에서 그 가치가 높이 평가되어 왔다. 그러나 <수병>이 자수 작품임에도 불구하고 현재까지 섬유공예적 측면에서의 분석과 연구는 이루어지지 않았다. 본고에서는 <수병>의 바탕직물, 자수색사, 자수기법 등을 과학적 기기를 사용하여 조사 분석함으로써 <수병>의 문양소재와 섬유공예적 특징 및 <수병>이 섬유공예사에서 갖는 가치를 규명하였다. 연구 결과, <수병>은 8폭 병풍으로 이루어져 있으며 소재와 구도는 일반적인 초충도 회화작품과 유사하다. 각 폭의 주제문양은 제1폭에서부터 순서대로 오이, 맨드라미, 원추리, 여주, 패랭이, 수박, 가지, 들국화로 이루어져 있다. <수병>의 문양 중 여주는 현전하는 초충도 회화작품에서는 볼 수 없는 특별한 소재이다. 제8폭은 곤충, 파충류 등의 문양이 없이 들국화만 단독으로 시문하여 초충도의 전형적인 형식과 차별이 있다. <수병>의 직물은 지금까지 장식용 자수에서는 볼 수 없었던 검은색을 사용하여 다채한 색사를 강조하여 극대로 표현하고자 했음을 알 수 있다. 바탕직물은 5매 공단[무문단(無紋緞)]을 사용하였다. 자수사는 극히 미약하게 꼬임을 준 반푼사를 사용하였으며 꼬임의 방향은 우연이다. 한 가지 색의 단사를 사용하기도 하고 때로는 두 가지 색을 병사로 사용하거나 합연사한 혼합색을 사용하여 입체적으로 표현하였다. 색상은 열화되고 퇴색이 심하여 원래의 색은 알 수 없지만 가장 많이 사용된 색은 황색계열에서 녹색계열의 색이며 청색, 갈색, 자색 등이 비교적 잘 남아있다. 원추리, 패랭이, 딸기 등의 색은 현재 적황색으로 남아 있는데 초충도와 비교해 볼 때 원래는 주황색 또는 홍색이었을 것으로 추정된다. 자수의 기법은 대부분 표면평수를 사용하여 면을 채우고 있다. 이를 통해 색사의 낭비를 줄이고자 했던 옛 여인들의 알뜰한 지혜가 엿보인다. 평수는 면을 장식하는 비교적 간단한 자수법이지만 색사를 다양화하고 면을 분할하여, 수직, 수평, 사선평수를 배합하고 때로는 자릿수와 같이 서로 맞물리게 자수하여 다양한 질감과 양감을 표현하였다. 곤충의 몸통은 가장자리수와 이음수, 평수를 혼합하여 입체적으로 표현하고 있으며, 특히 가장자리수의 활용이 주목된다. 그 외 이음수로 잎맥 등을 입체감 있게 나타내고, 제7폭의 쇠뜨기는 표면솔잎수를 층층이 자수하여 사실적으로 표현하였다. 패랭이, 딸기, 오이 등에는 평수 위에 장식수를 더하여 세세한 묘사를 더했다. <수병>은 회화사, 문화사적으로도 가치가 크지만 한국 자수공예사에 있어서도 우수한 한국적 자수기법과 색채를 사용하여 신사임당 초충도의 모습을 가장 잘 표현하고 있는 점에서 큰 중요성을 지닌다고 할 수 있다.

• 자원환경지질
• /
• 제56권2호
• /
• pp.125-138
• /
• 2023

수계 내 세슘(cesium: Cs)을 제거하기 위하여 개발된 대부분의 기존 Cs 흡착제들은 원재료 값이 고가라는 단점과, 해수와 같이 높은 이온 강도와 낮은 Cs 농도를 가지는 대규모의 오염수를 실질적으로 정화하는데 한계를 가지고 있었다. 본 연구에서는 석탄광산배수를 처리하는 과정에서 생성되는 슬러지(CMDS)에 Na와 S를 첨가하여 친환경적이고 높은 Cs 제거 효율을 가지는 Cs 흡착제를 개발하였다. Fe 및 Ca 함량이 풍부한 CMDS를 1차 소재로 사용하였고, 열처리 과정으로 Na와 S를 첨가하여 새로운 Cs 흡착제를 제조하였다(이하 본 연구에서 개발한 흡착제는 Na-S-CMDS라 명명함). Na-S-CMDS의 Cs 흡착능 및 흡착 기작을 평가하기 위해 실험실 규모의 실험과 흡착 동역학 및 등온 모델링 연구를 수행하였으며, XRF, XRD, SEM/EDS, XPS 등의 분석을 통해 Na-S-CMDS의 물리화학적, 광물학적 특성을 조사함으로써 Cs 흡착 기작을 규명하였다. 흡착 배치 실험 결과, Cs은 빠르게 Na-S-CMDS에 흡착되어 1시간 내 평형에 도달하였으며, 낮은 Cs 농도(0.5 mg/L) 조건에서도 높은 Cs 제거 효율(> 90.0%)을 보였다. 흡착 등온 모델링 결과, 단일 흡착을 가정하는 Langmuir 흡착 등온 모델에 대응되는 경향을 보였으며, 흡착 동역학 모델링 결과 흡착 경향이 유사 2차 속도(pseudo second order kinetic) 모델과 일치하는 경향을 보였고, 이러한 결과는 단순한 물리적 흡착보다 이온 교환과 같은 화학적 흡착이 우세함을 의미한다. 고농도의 Cs 용액으로 반응시킨 Na-S-CMDS의 XRF/XRD 분석 결과, Na-S-CMDS 내 Na 함량은 감소하고 흡착 전 존재하던 erdite (NaFeS₂·2(H₂O))가 관찰되지 않는 것을 통해, Na⁺과 Cs⁺ 사이에서 활발한 이온 교환 반응이 진행되었음을 알 수 있었다. XPS 분석 결과, Na-S-CMDS에서 Cs와 S 사이의 강한 결합 작용이 관찰되었으며, 이러한 Cs와 S(또는 S-복합체)내 결합에너지 감소도 Na-S-CMDS의 Cs 흡착능을 증가시키는 요인으로 판단되었다. 본 연구를 통해 기존에 폐기물로 처리되었던 석탄광산배수슬러지를 개량하여 제조한 Na-S-CMDS는 기존의 Cs 흡착제보다 제조 비용이 저렴하고, 해수 및 지하수와 같이 이온 강도는 높지만 Cs 농도가 낮은 대규모 오염 수계에서도 Cs 흡착능이 높게 유지되어, 현장에서 효과적인 Cs 흡착제로 사용할 수 있을 것으로 기대한다.

• 한국환경생태학회지
• /
• 제37권4호
• /
• pp.302-314
• /
• 2023

본 연구에서는 생물다양성협약(CBD) 글로벌 보전목표(K-M GBF)의 핵심이라고 할 수 있는 실천목표 3(30by30)에 대한 우리나라의 효과적 대응 방향을 모색하기 위한 것으로, OECM에 대한 글로벌 개념 고찰 및 전문가 인식조사를 통해 국가 차원의 체계적인 OECM 발굴방향을 모색하고자 하였다. 글로벌 표준을 준수하되 한국적 맥락을 반영한 국가 차원의 체계적인 OECM 발굴방향을 모색을 위해 본 연구에서는 ①OECM 관련 한국적 용어 사용, ②글로벌 표준을 반영한 결정인자(criteria) 도출, ③우리나라 잠재 OECM 후보 유형 도출, ④OECM 발굴‧보고 시 고려사항 등을 검토하였다. 먼저 OECM의 단순 번역어 사용이 아닌 이의 개념을 잘 반영한 '한국적 용어' 사용에 대한 공감대 형성이 있었으며, 가장 선호되는 용어이자 '자연과 조화로운 삶'이라는 생물다양성협약(CBD) 2050 비전과도 그 맥락을 같이하는 '자연공존지역(12명)'이 타당한 것으로 나타났다. 글로벌 표준을 반영한 주요 결정인자로는, 1단계 선별과정에서 OECM 핵심 특성을 반영한 4개 결정인자(1. 보호지역 여부, 2. 지리적 경계, 3. 거버넌스‧관리, 4. 생물다양성 가치)를 활용하고, 개별지역 심층진단을 수행하기 전에 관리‧관할기관 등과의 공감대형성(2단계) 과정을 거친 후 3단계(발굴‧보고단계)에서 2가지 결정인자(3-1 거버넌스와 관리의 효과성과 지속성, 4-1의 생물다양성 가치의 장기적 보전성과)를 추가하여 심층 진단을 수행하는 방향을 제시하였다. 본 연구에서 살펴본 28개 유형은 대체적으로 OECM 부합성이 높은 것으로 나타났으며(4.45~6.21점/7점, 평균 5.24점), 특히 자연환경국민신탁의 보전재산(6.21점) 및 보전협약지(6.07점)가 OECM 개념에 가장 잘 부합할 것으로 나타났다. 이어 세계자연유산 완충구역(5.77점), 사찰림(5.73점), 개발제한구역(5.63점), 비무장지대(5.60점), 생물권보전지역 완충구역(5.50점) 등이 잠재성이 높은 것으로 나타났다. 절대보전무인도서의 경우 보호지역에 부합한다는 응답(5.83/7점)이 OECM 부합성(5.52/7점) 보다 더 높게 나타나, 향후 절대보전무인도는 그 주변해역(1km)과 더불어 한국보호지역데이터베이스(KDPA)에 등재를 추진하는 것이 바람직할 것으로 판단된다. OECM 관련 글로벌 표준 검토 및 전문가 인식조사 결과를 토대로, 한국적 맥락의 OECM 발굴시 고려사항으로 10가지를 제시하였다. 향후 이러한 고려사항을 참고하여 단계적인 발굴사업을 통해 OECM을 목록화하고 기존 보호지역과의 연계를 통한 국가 차원의 현지-내 보전체계 정립을 위한 지속적인 연구가 필요할 것으로 판단된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 미술자료
• /
• 제96권
• /
• pp.18-53
• /
• 2019

최근 국립중앙박물관이 기증을 받아 "우리 강산을 그리다: 화가의 시선, 조선시대 실경산수화" 특별전(2019년)에서 처음으로 공개한 작품인 <경포대도>와 <총석정도>는 조선시대 회화사 이해에 있어 시사하는 바가 매우 지대하다. 두 작품이 1557년의 관동 유람을 계기로 그려진 병풍의 일부였음을 알 수 있어서 16세기 산수화에 대한 이해의 폭을 넓히는 데 획기적인 자료가 되기 때문이다. 이러한 중요성을 밝히기 위해서 본고에서는 <경포대도>와 <총석정도>에 담긴 경물의 내용을 살펴보고 제작시기와 양식상의 특징을 분석한 후, 다른 작품과의 비교를 통해서 이 작품에 담긴 회화사적인 의미에 대해서 살펴보았다. 이 작품의 제작 배경은 <총석정도>의 발문으로 알 수 있다. 본고에서 박충간(朴忠侃)(?~1601)으로 비정한 정상일로(商山逸老)가 1557년 봄에 홍연(洪淵)(?~?)과 함께 금강산(풍악산)과 관동 지역을 유람하고 유산록(遊山錄)을 작성하였으며 시간이 흐른 뒤 그중 몇몇 명승지를 그려 병풍을 만든 것을 알 수 있었다. 홍연은 자가 덕원(德遠)으로 1551년에 별시문과에 급제하고 1584년까지는 생존했던 인물이다. 박충간은 호가 남애(南崖)로서 1589년 정여립(鄭汝立)의 모역을 고변하여, 그 공으로 형조참판으로 승진되고 평난공신(平難功臣) 1등에 책록된 후 상산군(商山君)에 봉해진 인물이다. 이 글로 작품의 제작 시기를 1557년의 유람 후이자, 발문을 쓴 박충간이 50대 이상이 되는, 1571년 이후 곧 16세기 후반경으로 보았다. 산수나 나무 표현 등의 화풍을 기준으로도 16세기 후반의 시대 양식과 부합한다. 전술한 발문의 내용으로 <경포대도>와 <총석정도>가 병풍의 일부였던 것을 알수 있으며, 발문이 써 있는 <총석정도>가 마지막 폭이었을 것으로 생각된다. <경포대도>를 보면 구도면에서 조선 초기 안견파(安堅派) 산수화에서 볼 수 있는 편파(偏頗) 3단 구도의 요소를 찾을 수 있으나 실경(實景)을 대상으로 하여 그 배치와 화법이 현실화된 양상을 볼 수 있다. 시점(視點)에 있어서도 여러 경물간의 관계나 경관의 특징이 효과적으로 표현되도록 사선각(斜線角)의 부감시(俯瞰視), 정면시(正面視) 등을 활용하여 경포대의 넓은 영역을 효과적으로 표현하는 다각적(多角的)인 관점(觀點)을 보여준다. 산의 형태나 태점(苔點)의 사용은 1557년작 <의순관영조도(義順館迎詔圖)>(서울대학교 규장각한국학연구원 소장)와 매우 유사하다. 16세기 안견파의 특징인 짧은 선이나 점으로 질감을 내는 단선점준(短線點皴)과 구름 모양 운두준(雲頭皴)은 현장감 있게 변모되었다. 조선 초기 산수화의 전통적인 구도와 연결성을 찾을 수 있는 <경포대도>와 달리 <총석정도>는 그 구도가 매우 파격적이다. 화면에 중심축을 두고 돌기둥들이 첩첩이 도열하여 삼각형을 이루고 있는 데 근경(近景)의 돌기둥, 중앙의 사선봉(四仙峯), 절벽 위의 사선정(四仙亭)을 삼단계 정도의 깊이감으로 배치하여 화면에 공간감을 조성하였다. 중앙의 사선봉이 화면의 대부분을 차지하며 압도적인 비중을 점하고 있으나 수직적인 돌기둥들이 유기적인 관계를 형성하지 못하고 분질적(分節的), 평면적(平面的)인 양상으로 그려져 아직 입체적이고 자연스러운 공간감을 조성하는 데에는 이르지 못하고 있다. 기둥의 아랫부분은 희게 하고 윗부분은 어둡게 하여 고원(高遠)의 상승감을 고조시키는 효과가 있는데 각 기둥을 묘사하는 준법을 보면 기둥으로 설정된 면에 담묵을 바르고 그 위에 농묵의 가는 선들을 그어 총석의 질감과 쪼개짐을 묘사하였다. 붓끝을 사선으로 누르며 수직으로 내려 긋고 있어서 부벽준(斧劈皴)의 초기적 양상을 보인다. 일관되게 보이는 이러한 흑백의 대조, 수직적 준법의 구사는 앞으로 전개될 절파계(浙派係) 화풍의 유행을 예시해준다. 한편 기둥의 윤곽 및 균열문이 각각 다 달라서 실제의 특징을 살리려고 한 것을 알 수 있다. 기둥 위에 올라앉은 새들의 묘사, 파도와 흰 거품의 표현 등에서 반복적인 붓질을 찾을 수가 없고 매우 생생한 묘사력을 볼 수 있다. 이러한 <경포대도>와 <총석정도>의 경물 배치는 이후 변화를 보인다. <경포대도>는 아래쪽에 죽도(竹島)를 두고 경포호를 넘어 위쪽에 위치한 경포대 건물과 오대산 일대를 올려보는 구도였다. 이러한 배치는 경포대를 화면 아래쪽에 두고 위쪽의 바다를 향하는 18세기 이래의 전형적인 구성과 차이를 보인다. 바다 쪽에서 총석을 바라보며 그린 <총석정도> 역시 이후의 작품에서는 내륙에서 바다를 향하는 것으로 관점의 변화를 보인다. 이러한 변화는 정선(鄭敾)(1676~1759)과 김홍도(金弘道)(1745~1806 이후)의 작품이 제작된 이후, 두 사람의 구도를 따라 관동도의 유형이 정착되는 것과 관련이 있다. 하지만 사라진 듯 했던 16세기 <경포대도>의 구도가 조선 말기 <강릉 경포대도>에서와 같이 민간 회화에서 전승된 것도 확인해 볼 수 있다. 관동 지역의 명승도는 이른 시기부터 그려져 고려 김생(金生)(711~?)의 관동도(關東圖), 조선 초 안견(安堅)(15세기 활동)의 낙산사도(洛山寺圖) 등 여러 화가가 단폭이거나 여러 폭의 관동도를 병풍이나 첩 형태로 그렸던 것을 문헌으로 확인할 수 있다. 이처럼 기록은 많으나 이를 증명할 수 있는 작품이 없었는데 본고에서 고찰하는 이 두 점은 현존하는 관동도 중 연대가 가장 올라가는 예로 기록으로만 남아 있는 관동도(關東圖) 병풍(屛風)의 제작 양상을 알게 해주어 회화사적인 의미가 크다. 특히 발문의 내용에 따라 8폭 병풍일 것으로 생각되어 16세기 후반에 이미 관동팔경도(關東八景圖) 형식이 형성되었음을 알 수 있다. 그 성격에 있어서 현존하는 16세기 실경산수화의 예로 거론되는 작품들이 모두 실용적, 공적인 목적의 계회도나 기록화로 제작되어 실경산수화적 요소가 부분적으로 나타난 것과 달리 이 작품은 실제 경관을 대상으로 자연의 변화무쌍함과 아름다움을 담고자 하는 것이 일차적인 목적이었다는 점이 주목된다. 발문을 쓴 박충간은 유람할 때 지었던 감상시를 곁들여 자연의 진면목을 반추하는 태도를 보인다. 이 점은 기존에 알려진 실경산수화의 성격과 그 양상을 달리하는 것으로 순수 감상을 목적으로 한 본격적인 실경산수화의 예라는 점에서 그 중요성이 높다. 이처럼 <경포대도>와 <총석정도>의 두 작품은 유람의 결과를 시화(詩畫)로 제작하였다는 역사적 사실을 현존 작품으로 확인할 수 있는 가장 이른 예라는 점에서 그 의미가 지대하다. 또한 그간 확인할 수 없었던 16세기 실경 산수화의 다양한 형태와 구도 및 시점의 면모를 보여주어 한국 실경산수화에 대한 이해의 폭을 확장한 점에서도 그 중요성이 매우 크다.

• 한국작물학회지
• /
• 제17권
• /
• pp.45-78
• /
• 1974

본 시험은 유ㆍ무한형대두품종에 대한다수성품종의 유종 및 재배기술개선의 기초자료로서 건물생산 및 제 형질간의 상호관계를 밝힐 목적으로 파종기, 재식밀도 및 시비수준이 다른 조건에서 광교, 동북태 및 수계5001를 유한형품종으로 그리고 Shelby, SRF-300 및 Harosoy를 무한형품종으로 하여 1972년부터 2개년에 걸쳐 작물시험장(수원)에서 실시하였는데 그 결과를 요약하면 다음과 같다. 1. 개화기에 있어서의 건물중, CGR 및 LAI는 품종, 파종기, 시비수준을 막론하고 밀식할수록 증가하였고 개화기가 빠른 무한형품종들은 유한형품종보다 현저히 떨어졌으나 정엽전개기에는 오히려 유한형보다 무한형이 더 높거나 거의 같은 수준을 나타냈다. 2. 파종기별로 본 개화기의 건물중은 유ㆍ무한형 모두 5월 21일구와 6월 15일구가 거의 비슷하나 7월 10일구의 건물중은 낮았으며 시비수준이 높을수록 개화기에는 CGR을 비롯하여 건물중과 LAI도 높았다. 3. 엽면적지수(LAI)는 동일군내에서 품종간차이도 상당히 컸으나 무한형품종은 파종기, 재식밀도 및 시비수준을 막론하고 유한형품종보다 떨어지는데도 종실수량은 별로 떨어지지 않았다. 4. 조식 및 증비의 경우에는 밀식을 하면 정엽전개기 이후에 엽과 엽병부분의 낙하가 많으나 소식인 경우 또는 만파(7월 10일)에서는 엽과 엽병의 낙하가 적은 경향이 뚜렷하였다. 5. 식물체부분별로 보면 경중비율은 밀식할수록 높아지고 반면 엽중비율은 소식할수록 높아졌으며 만파할수록 경중과 엽병비율은 떨어지고 엽중비율은 높아지는 경향이었다. 6. 정엽전개기에 있어서 유한형품종은 맥중비율이 5월 21일구에서 25내외, 6월 15일구에서 8%내외, 7월 10일구에서는 9%내외이어서 매우 적은 반면 무한형품종은 5월 21일구에서 6%내외, 6월 15일구에서 14%내외, 그리고 7월 10일구에서는 21%내외로 매우 컸다. 7. 광교는 다비조건에서 도복된 후에도 황화낙엽이 적고 생육이 회복되나 SRF-300은 생육이 회복되지 않았다. 8. 종실수량은 5월 21일구가 가장 높았으나 6월 15일구와 별로 차이가 없고 7월 10일구는 감소가 컸는데 유한형품종들은 만파에 의한 감소정도가 비교적 적고 무한형품종은 그 정도가 컸었다. 9. 재식밀도의 적정수준은 수량면으로 보았을 때 5월 21일구에서는 a당 1,250∼2500개체, 6월 15일구에서는 2,500개체, 그리고 7월 10일구에서는 3,333개체수준이었다. 10. 전품종에 있어서 정엽전개기의 건물중과 LAI 그리고 맥비만기의 건물중은 수량과 높은 상관을 나타냈고 유한형품종에 있어서 최고의 수량을 기대할 수 있는 건물중의 적정선은 개화기때에 a당 25kg, 정엽전개기때에 50kg내외였으며 무한형품종에 있어서는 맥비만기의 LAI는 4∼5, 그리고 맥비만기의 건물중은 a당 80kg내외이었다. 11. 밀식을 하면 경장은 커지고 경태와 분지 및 절수는 적어져서 주경비율이 높아지고 절간장이 길어졌다. 경중, 절수, 맥수 및 종실수량의 주경비율은 밀식할수록 그리고 만파한 것이 높았으며 무한형이 유한형보다 높았다. 12. 밀식 또는 만파의 경우에는 맥수나 종실수량의 주경비율이 높아서 주경의존도가 높은 품종이 유리한 것으로 보였다. 13. 개화기와 정엽전개기의 LAI는 유ㆍ무한형 모두 단위면적당 총절수, 건물중 및 건경중과 높은 상관을 보였고 개화기의 LAI는 유한형의 경장 및 a당 맥수와의 상관에는 유의차가 없었으나 무한형의 경장 및 a당맥수와는 고도의 유의상관을 보였다. 14. 건물중은 LAI외에 CGR, 경장 그리고 a당 절수, 맥수 및 건경중과 높은 상관을 보였으나 경태와는 유의적인 상관이 없었다. 15. 도복지수는 LAI, 건물중, 경장 및 건경중과 높은 유의상관이 있었고 경태와는 무한형품조에 있어서 고도의 부의 상관을 보였으나 유한형품종에서는 유의상관이 없었으며 유한형품종에서는 수량과 고도의 정의 상관을 보였다. 또한 도복지수는 주경의 평균절간장과 고도의 정의 상관이 있었다. 16. 100립중은 밀식 및 만파 그리고 무비조건에서 떨어지는 경향이었고 주경보다 분지의 100립중이 낮았다. 17. 단백질함량은 어떤 재배조건에서도 변화가 거의 없으나 지방함량은 만파할 때 감소하는 경향이 뚜렷하였다.

• Tuberculosis and Respiratory Diseases
• /
• 제42권6호
• /
• pp.846-854
• /
• 1995

연구배경: Cyfra 21-1은 상피종양세포의 세포질에 존재하는 cytokeratin 19의 분절로서 상피종양세포의 파괴시 혈중내로 유리되므로 그 혈중 농도를 측정하여 종양표지자로 이용할 수 있는 것으로 알려져 있다. 이에 저자들은 폐암, 폐결핵, 기타폐질환 및 정상대조군 환자들의 혈청내 Cyfra 21-1, SCC 항원 및 CEA의 농도를 측정하여 폐암의 종양표지자로서 Cyfra 21-1과 SCC 항원 및 CEA의 진단적 효용성을 비교 관찰하고자 하였다. 또한 편평상피세포암에서 Cyfra 21-1과 평상펴셰포암의 특이 종양표지자로 알려진 SCC 항원과의 진단적 민감도와 특이도의 차이를 비교하고 그 병기 진행에 따른 Cyfra 21-1의 혈중농도의 증가 여부를 관찰하고자 하였다. 방법: 1992년 12월부터 1993년 6월까지 서울중앙병원에 입원하여 조직생검으로 초진단된 원발성 폐암 79예(편평상피세포암 41예, 선암 18예, 기타의 미분화 비소세포양 14예, 소세포암 6예)와 폐결핵 32예, 기타폐질환 23예, 정상대조군 23예를 대상으로 하였다. Cyfra 21-1과 ELSA2-CEA를 사용하였고, SCC 항원은 방사계수측정 kit인 ABBOTT SCC RIABEAD를 사용하였다. 결과: 1) Cyfra 21-1의 혈중농도는폐암군이 평균({\pm}표준편차) $18.38{\pm}3.65\;ng/mL$로서 비교군 $1.16{\pm}0.53\;ng/mL$보다 유의하게 높았다(p<0.0001). SCC 항원은 폐암군에서 $3.53{\pm}6.06\;ng/mL$로서 비교군 $1.19{\pm}0.5\;ng/mL$보다 유의하게 높았다(p<0.01). CEA는 폐암군에서 $35.03{\pm}13.9\;ng/mL$로서 비교군 $2.89{\pm}1.01\;ng/mL$ 보다 유의하게 높았다(p<0.0001). 2) 폐암군내에서는 Cyfra 21-1의 혈중농도가 편평상 피세포암군에서 $31.52{\pm}40.13\;ng/mL$로서 선암군 $2.41{\pm}1.34\;ng/mL$(p<0.0001) 및 소세포암군 $2.15{\pm}2.05\;ng/mL$(p=0.007) 보다 유의하게 높았다. SCC 항원의 혈중농도는 편평상피세포암군에서 $5.1{\pm}7.68\;ng/mL$로서 선암군 $1.36{\pm}0.69\;ng/mL$(p=0.009) 및 소세포암군 $1.1{\pm}0.24\;ng/mL$(p=0.024)보다 유의하게 높았다. 3) 편평상피세포암군에서 폐암의 병기 진행에 따른 Cyfra 21-1의 혈중농도의 증가는 없었다. 4) Cyfra 21-1의 진단양성 기준치를 3.3 ng/mL로 하였을때 편평상피세포암의 민감도가 83%로 선암의 22%, 소세포암의 17%보다 높게 산출되었다. SCC 항원의 민감도가 편평상피세포암에서 39%, 선암에서 11%, 소세포암에서 0% 이었다. CEA의 민감도가 편평상피세포암에서 20%, 선암에서 39%, 소세포암에서 33%이었다. 5) ROC 곡선 분석상 폐암의 진단에서 Cyfra 21-1의 민감도와 특이도가 SCC 항원 및 CEA 보다 우수한 것으로 나타났다. 결론: Cyfra 21-1은 폐임에서 SCC 항원 및 CEA에 비하여 민감도 및 특이도가 높은 종양표지자이며, 특히 편평상피세포암에서 그 민감도와 특이도가 높아 편평상피세포암의 특이 종양표지자로 알려진 SCC 항원보다 우수한 종양표지자로 사료되었다.

• 헤리티지:역사와 과학
• /
• 제41권2호
• /
• pp.43-59
• /
• 2008

삽(?)은 유교 예법에 따른 상장례(喪葬禮) 도구로 나무로 틀을 만들고 그 위에 백포(白布)나 두꺼운 종이를 붙여 그림을 그린 후, 자루를 달아 들 수 있도록 한 것이다. "례기(禮記)"에 따르면 삽은 주대(周代)부터 사용되었던 것으로 기록되어 있는데, 우리나라의 "조선왕조실록(朝鮮王朝實錄)"이나 "국조오례의(國朝五禮儀)", "사례편람(四禮便覽)"에 나타난 삽의 용례와 크게 차이가 나지 않는다. 본고에서는 현존하는 조선시대 사대부가의 회격 회곽묘에서 발견되는 삽의 발굴 사례 및 문헌 기록을 통해 그 용례와 제작방식, 시기에 따른 유물의 특징에 대해 고찰하고자 한다. 삽은 신분에 따라 사용하는 개수와 그리는 문양이 다른데, 사대부가에서는 주로 '아(亞)'형의 불삽 1쌍과 구름 문양을 그린 화삽 1쌍을 사용하였다. 삽의 크기는 너비가 2자[척(尺)], 높이 2자[척(尺] 4치[촌(寸)]로 만들었는데 초주지나, 저주지로 두 번 싸고, 세 번째는 연창지로 쌌다. 그리고 나서 백저포, 마포, 무명, 공단 등으로 덮었다. 그 양면에 보불을 그리고 구름 변아(邊兒)에 운기를 그리는데 대개 주사 또는 진사를 사용하였다. 사대부가 회격 회곽묘에서 출토되는 삽은 광중에 부장된 것으로, 삽자루와 분리된 형태이다. 즉, 출토되는 삽은 발인행렬시 삽을 매달았던 5자 길이의 삽자루는 태워 없애고, 관의 좌우에 세워 넣은 것이다. 출토 유물의 검토를 통해서도 제작과정을 유추할 수 있다. 출토된 유물은 각(角)의 개수에 따라 각이 3개 달린 것과 2개 달린 것으로 대별된다. 먼저 각이 3개 달린 것(유형 I) 중에는 나무 통판을 사용하거나 대나무를 납작하게 갈라, 바구니처럼 엮은 것도 있다. 각이 3개인 삽은 비교적 조선 전기에 집중되어 있으며, 전체적인 형태에 비해 그 제작방식이 다양한 편으로 생각된다. 반면 각이 2개 달린 삽의 경우에는 비교적 정형화된 제작방식이 보인다. 직사각형이나 역사다리꼴로 몸통부분을 만든 후, 2개의 각이 달린 삽의 윗부분을 연결한 형태이다. 다만 상단면을 곡선(유형 II) 또는 직선(유형 III)으로 처리하는 것이 다르다. 이러한 제작방식은 각이 3개 달린 것에 비해 간단하며, 제작기법 상의 차이는 크지 않다. 특히 상단면을 직선으로 처리하는 방식은 오늘날까지도 사용되고 있다. 분석에 사용된 30건 중 묘주의 몰년, 즉 삽의 제작 연대가 명확한 것만 선택하여 분석한 결과, 유형 I은 16세기 전반에 집중되어 있음을 알 수 있다. 이어 유형 II는 16세기 후반부터 17세기 후반, 유형 III은 17세기 전반부터 18세기 전반까지 고르게 분포하고 있다. 요컨대 삽의 형태는 유형 I에서 유형 II로, 다시 유형 II에서 유형 III으로 변화하고 있는 것으로 생각된다. 17세기는 변화의 시기로 유형 II III이 혼재되어 있다. 유형을 크게 3가지로 구분하였으나 유형 II III은 각이 2개인 측면에서 그 형태가 유사하다고 볼 때 주목할 만한 전환기는 16세기 중반이라고 볼 수 있다. 아마도 유형 I은 유형 II III에 비해 제작 과정상 공이 더 많이 들어갈 것으로 생각되며, 후대로 내려올수록 경제성의 원리에 따라 삽의 형태 및 제작방법도 간소해진 것으로 보인다. 상장례의 간소화 경향은 "선조실록(宣祖實錄)"에 예장(禮葬)이 몇 차례 중지되는 사건들을 통해 임진왜란 이후에 가속화된 변화로 볼 수 있다. 삽의 경우 이미 16세기 후반부터 간소화되고 있었으며, 심지어 18세기에는 삽을 따로 제작하지 않고 구의(柩衣) 및 관(棺)에 직접 그리는 현상까지 초래하였다. 그러나 형태적으로 단순화 되는 과정에도 "례기(禮記)"의 삽 사용 규정은 지켜지고 있어, 그 의례의 형식은 합리적으로 간소화되었음을 알 수 있다.