• Sleep Medicine and Psychophysiology
• /
• v.17 no.2
• /
• pp.91-99
• /
• 2010

Objectives: Deficit schizophrenia (DS) constitutes a disease separate from non-deficit schizophrenia (NDS). The aim of the current study was to compare the quantitative EEG and low resolution electromagnetic tomography (LORETA) imaging between DS and NDS. Methods: This study was performed by 32 channels EEG for 42 schizophrenia patients who we categorized into DS and NDS using proxy instrument deficit syndrome (PDS). We performed the absolute power spectral analyses for delta, theta, alpha, low beta and high beta activities. We compared power spectrum between two groups using Independent t-test. Partial correlation test was performed with clinical parameters. Standardized LORETA (sLORETA) was used for comparison of cortical activity, and statistical nonparametric mapping (SnPM) was applied for the statistical analysis. Results: DS showed significantly increased delta and theta absolute power in fontal and parietal region compared with NDS (p<0.05). Power spectrum showed significant correlation with 'anergia' and 'hostility/suspiciousness' subscale of brief psychiatric rating scale (BPRS)(p<0.05). sLORETA found out the source region (anterior cingulate cortex/limbic part) that delta activity was significantly increased in DS (p=0.042). Conclusions: DS showed different cortical activity compared with NDS. Our results may suggest QEEG and LORETA could be the marker in differentiating between DS and NDS.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.5
• /
• pp.23-32
• /
• 2007

The goal of this study is to perform several bending tests on a shape memory alloy bar and to analyze the characteristics of the bending behavior. The other goal is to verify the seismic performance of an SMA bar bending application. Single and double bending tests were conducted with varying loading speeds and maximum displacement. The loading and the unloading stiffness were estimated from the force-displacement curves and the equivalent damping ratio of each test was also assessed. In single bending, the SMA bar showed the stiffness hardening after the displacement of 32 mm. It is assumed that this phenomenon is due to the stress-induced-martensite hardening. The increasing loading speed did not influence on the stiffness of the single bending SMA bar. The stiffness of the double bending bar is about 5 times of that of the single bending. This study introduced a seismic application of SMA bending bars as seismic restrainers for bridges and showed its practicality. SMA bars in bending are used for seismic restrainers in a three-span-simply-supported bridge. They showed the effectiveness to reduce the responses of the bridge and the applicability for a seismic restrainer. The significance of this study is to provide basic knowledge of SMA bending and its seismic applications.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.233-242
• /
• 1988

The uranium(VI) complexes with new unsaturated macrocyclic ligands of cryptand types and the neodymium(III) complexes with cryptand 222 and DBC ligands have been investigated polarographically in dimethylsulfoxide solvent. The reduction states, electron numbers involved in the reduction process, effects of the added acid on the polarograms of complexes, and the mechanisms of the reduction electrode reactions have been examined. The stability constants and mole-ratio of new complexes were also obtained by polarographic method. The reaction of ligands was controlled by the diffusion in the reduction with four electrons at a step, whereas the redox reaction with six electrons at three steps in $UO_2\;^{2+}$ complexes with macrocyclic ligands and the redox reaction with one electron at a step in $Nd^{3+}$ complexes with cryptand 222 and DBC have been observed. The imine ligands formed stable complexes with uranium(VI) above pH 7.0, and the neodymium(III) complexes with cryptand 222 and DBC ligands were stable above pH 4.0.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.290-296
• /
• 2009

The morphology and mechanical properties of epoxy/polyamide/MPD/2E4MZ-CN reactive blends with various amount of catalyst were investigated. The cure behaviors, mechanical strengths, and morphological changes of the epoxy blend systems were analyzed by using DSC, UTM, and SEM, respectively. The amount of catalyst ranged from 0 to 3 phr, and the cure reaction occurred at $170^{\circ}C$ for 30 min. The maximum peaks in heat flow during cure reactions appeared at slightly lower temperature with increasing catalyst content, indicating that the cure reactions start at lower temperature by adding catalyst and polyamide rarely hinders the cure reaction paths. The co-continuous morphology was found in epoxy/polyamide(20 phr) blends and by adding catalyst to the blends much clearer and uniform co-continuous phase was observed. The surface tension of the mechanical test specimen was increased due to the AP plasma surface treatment, and then adhesion strength was increased by over 20% by adding 2 phr of catalyst to the blends. When considering morphological tuning of the blends by means of catalyst incorporation, it is expected that the increased elongation and adhesion strength can be achieved in the structural adhesive systems.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.284-289
• /
• 2009

The morphology and mechanical properties of epoxy/polyamide/MPD reactive blends with various amount of polyamide were investigated. The cure behaviors, mechanical strengths, and morphological changes of the epoxy blend systems were analyzed by using DSC, UTM, and SEM, respectively. The amount of high soluble polyamide in epoxy ranged from 0 to 30 phr, and the cure reaction occurred at $170^{\circ}$ for 30 min. The start and maximum exothermic temperature in heat flows during cure reactions appeared at almost same temperature, indicating that soluble polyamide could rarely hinder the cure reactions. From the SEM images, it was found that the size of separated-phase was very fine about 100-300 nm, and at 20 phr of polyamide the boundary of separated-phase was unclear and the phase revealed co-continuous. By AP plasma treatment of specimen surface, the adhesion strength was increased by 20% due to enhanced surface free energy. By blending 20 phr of polyamide with epoxy, the adhesion strength was increased by 50% due to co-continuous phase in morphology. By considering the surface treatment of specimen and morphological tuning of the blends, it can be expected that the improvement in toughness and excellent adhesion strength can be achieved in structural adhesive systems.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.690-698
• /
• 2015

Effects of roasting on physical (weight, volume, density and color) and chemical properties (total phenol, caffeine, chlorogenic acid and antioxidant properties) of three Arabica coffee beans (Brazil Bourbon, Indonesia Mandheling and Kenya Tatu) were investigated. A steady weight loss, volume increase, and bean density decrease were observed during the roasting process. The $L^*$, $a^*$, and $b^*$ values tended to decrease as the roasting temperature and time increased. Caffeine level was approximately 0.73% in green beans, and increased to 40-67% for darker roasts. Green beans contained the highest chlorogenic acid content, which decreased as the roasting temperature and time increased. The light- and medium-roasted coffee showed the highest total phenolol contents. The antioxidant activities were measured using DPPH and ABTS. The light-roasted coffee beans showed the highest antioxidant activities, and an approximately 36-51% loss in antioxidant activity was observed after further roasting. The flavor patterns of roasted coffee beans were analyzed using an electronic nose system based on gas chromatography. This analysis demonstrated that an electronic nose system can be applied to identify the green bean variety and the degree of roasting.

• Journal of Korean Biological Nursing Science
• /
• v.8 no.2
• /
• pp.61-72
• /
• 2006

Purpose: This study was to examine the frequency, distribution and characteristics of researches using biological measurement published from 2000 to 2004 in 10 major nursing journals in Korea, Design: Literature analysis. Method: Journals including papers using biological measurements, publishing year, research design and outcome variables were analyzed. Results: 1. Researches using biological measurement were 318(13.3%). 2. Researches using biological measurement in the Korean Academy of Nursing were highest(97papers, 17.5%) among the nursing journals. The proportion of papers using biological measurement to total number of papers was the highest in the Journal of Korean Biological Nursing Science as 77.3%(51papers). 3. The 233 papers(73.3%) were experimental researches among 318 papers using biological measurement which showed the highest proportion. 4. Patients were highest subjects of researches using biological measurement(197papers, 61.9%). 5. Blood test was most frequently used as physiological variables from 2001 to 2004. Conclusion: Researches using biological measurement of 10 Korean Nursing Journals in year 2000-year 2004 were very low. We need more researches using biological measurement to provide more objective evidence for nursing practice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1754-1759
• /
• 2008

To produce plastic parts that have fine pattern through conventional injection molding, a lot of difficulties follow. Therefore, rapid heating and cooling methods are good candidates for manufacturing injection-molded parts with micro/nano patterns. In this study, we adopted the E-Mold patent technology. The mold for E-Mold technology has a separate heated core with micro heaters. It is very important to optimize the lay-out of the heaters in heated core because it influences both control and distribution of mold temperature. We developed a optimization method of heating line lay-out by using commercial softwares and compared the output with the experimental results. We used Pro-Engineer Wildfire 2.0 for the mold design, ICEMCFD for mesh generation, and FLUENT for heat transfer simulation. The simulation results showed the temperature profile from $60^{\circ}C$ to $120^{\circ}C$ or $180^{\circ}C$ during heating and cooling process which were compared with the injection molding experiments. We concluded that the simulation could well explain the experimental results. It was shown that the E-Mold optimization design for heater lay-out could be available through the simulation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.731-732
• /
• 2007

This paper presents the final configuration of test field and test items for the application of IEC 60364-4-44 in Korea. IEC 60364-4-44 provides rules for the protection against the effects of conducted and radiated disturbances on electrical installations. Especially this standard deals with the protection of low voltage facility against the ground fault in the high voltage side of power distribution system. Many countries define the regulations on the use of electrical facilities based on their own power system and technical references which are considered to be suitable for them. The background of circuit of IEC 60364-4-44 is based on the ungrounded system as most of European countries. However, domestic electric power distribution system is based on multi-grounding system different from European system. Therefore, it is necessary to evaluate or prove the effect of the IEC 60364-4-44 for introducing and applying it to the domestic grounding system as a national standard. The authors with KEA(Korea Electric Association) carried out a project on the application of IEC 60364-4-44 to Korean electrical installations of buildings sponsored by Korean ministry of commerce, industry and energy for three years(2004.4.1$\sim$2007.3.31). The test field is established in K.E.R.I.(Korea Electrotechnology Research Institute), which is the purpose of evaluating the formula to calculate touch voltage and stress voltage in the IEC standards. This paper presents some considerations and final configuration of test field to evaluate and introduce the IEC 60364-4-44 applicable to domestic rule for the protection against ground fault.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.3
• /
• pp.26-36
• /
• 2005

Objectives: Maier symptoms of allergic rhinitis are nasal obstructions, sneezing and watery rhinorrhea. When exposed to certain allergens, the IgE covered mast cells degranulate and release inflammatory mediators and cytokines which result in a local inflammatory reaction. In many recent studies, molecular biological methods have been used to investigate the role of cytokines in pathogenesis and new therapeutic targets of allergic rhinitis. This experimental study was done to reveal the effects of the Bojungikgi-tang on the allergic rhinitis. We have studied effect of mice on OVA-induced production of IL-4, IL-5, $INF-{\gamma}$ by murine splenocytes and effect of OVA-induced Total IgE and OVA-specific IgE Meterial and Metheds: 21 BALB/c rats were divided into three groups: normal group, control group, experimental group. To induce the allergic rhinitis in control group and experimental group, rats were sentitized intraperitioneally with 0.1% ovalbumin solution 3 times at intervals of 2 weeks. Then intranasal sensitization was performed by diffusing 0.1% ovalbumin solution 3 times at intervals of 2 days for a week. After that time, rats in experimental group were oral administration treated by the Bojuogikgi-tang fer 28 days. We observed changes of IL-4, IL-5, $INF-{\gamma}$, Total IgE and OVA-specific IgE. We used independent-test statistically. Results: 1. In IL-4 study, Bojungikgi-tang treated group didn't show significant differences. 2. In IL-5 study, Bojungikgi-tang treated group shows significant differences. 3. In $INF-{\gamma}$ study, Bojungikgi-tang treated group shows significant differences. 4. In Total IgE, Bojungikgi-tang treated group shows significant differences. 5. In OVA-specific IgE, Bojungikgi-tang treated group didn't show significant differences. According to this result, Bojungikgi-tang was concluded to be effective on lowering the total IgE. Through this. Bojungikgi tang seems to reduce the symptoms of allergic rhinitis. More studies are required to know exact mechanism of Bojungikgi tang to show the anti allergenic effect.