• The Plant Pathology Journal
• /
• v.22 no.3
• /
• pp.295-302
• /
• 2006

The present study addressed the efficacy of nanosized silica-silver for controlling plant pathogenic microorganisms. The nanosized silica-silver consisted of nano-silver combined with silica molecules and water soluble polymer, prepared by exposing a solution including silver salt, silicate and water soluble polymer to radioactive rays. The nanosized silica-silver showed antifungal activity against the tested phytopathogenic fungi at 3.0 ppm with varied degrees. In contrast, a number of beneficial bacteria or plant pathogenic bacteria were not significantly affected at 10 ppm level but completely inhibited by 100 ppm of nanosized silicasilver. Among the tested plant pathogenic fungi, the new product effectively controlled powdery mildews of pumpkin at 0.3 ppm in both field and greenhouse tests. The pathogens disappeared from the infected leaves 3 days after spray and the plants remained healthy thereafter. Our results suggested that the product developed in this study was effective in controlling various plant fungal diseases.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.161-166
• /
• 2009

Although the entrance of house has been identified as a hotspot for older adults' fall accidents, there was not any lift chair to prevent older adults' accidents. In this study, a lift chair was developed to reduce fall accidents that can occur when older adults put on or take off their shoes in the entrance. In order to develop the product, we considered two aspects. Firstly, we considered older adults' anthropometric data to determine the design specification of the product. Also we considered the environmental characteristics of space using the product. In order to overcome the limited spatial freedom and use the entrance space effectively, we took a simplified and folding type for the product.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.11-16
• /
• 2004

• Archives of design research
• /
• v.16 no.2
• /
• pp.151-160
• /
• 2003

Out of the OECD countries, Korea is showing the fastest growth of elderly population. Taking into account the rate of increase of the elderly and average lifespan, we can deduct that the future society will be an elderly society . Therefore, the market in Korea targeted to this group will quickly increase into a large market. Leading nations already into the elderly society , have actively pursued studies into silver generation product design and compared to these countries, Korea is far behind them. There is an immediate need for a detailed overall study on the design of products used daily by the elderly, This study has based its focused on the elderly society and silver generation products and was accompanied by thorough interview research method through questionnaires. The result showed that the Korean elderly were very aware about silver generation industry. However, they Pointed out that there are many Problems regarding silver generation products. Therefore, a need for a new design reflecting more of the lifestyle of the elderly is required. Also, there is an immediate need for development of more comfortable products and a well-structured system that enables easy access to these products.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.505-509
• /
• 2013

A low temperature ($65^{\circ}C$) thermal deposition process was developed for depositing a silver coating on thermally sensitive polymeric substrates. This low temperature deposition was achieved by chemical reduction of a silver alkylcarbamate complex with latent reducing agent. The effects of acetol as a latent reducing agent for the silver 2-ethylhexylcarbamate (Ag-EHCB) complex and their blend solutions were investigated in terms of reducing mechanism, and the size and shape of silver nanoparticles (Ag-NPs) as a function of reduced temperature and time, and PVP stabilizer concentration were determined. Low temperature deposition was achieved by combining chemical reduction with thermal heating at $65^{\circ}C$. A range of polymer film, sheet and molding product was coated with silver at thicknesses of 100 nm. The effect of process parameters and heat treatment on the properties of silver coatings was investigated.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.158-163
• /
• 1985

The anodic oxidations of the Silver(I) / Silver(II) / Silver(III) system have been studied in aq. 2M $AgNO_3$ solution with Platinum and Carbon electrodes. It has been found that $Ag_7O_8NO_3$ can be produced at relatively higher current density. Deposited black Oxy-salt were analyzed with several methods such as oxidizing power, X-ray powder diffraction patterns, thermal analysis, and reduction curves. It decomposed to AgO upon being suspended in boiling water. AgO compound obtained from $Ag_7O_8NO_3$ were purer and denser than Alfa-product AgO.

• Journal of Powder Materials
• /
• v.24 no.4
• /
• pp.315-320
• /
• 2017

There has been much interest in recycling electronic wastes in order to mitigate environmental problems and to recover the large amount of constituent metals. Silver recovery from electronic waste is extensively studied because of environmental and economic benefits and the use of silver in fabricating nanodevices. Hydrometallurgical processing is often used for silver recovery because it has the advantages of low cost and ease of control. Research on synthesis recovered silver into nanoparticles is needed for application to transistors and solar cells. In this study, silver is selectively recovered from the by-product of electrodes. Silver precursors are prepared using the dissolution characteristics of the leaching solution. In the liquid reduction process, silver nanoparticles are synthesized under various surfactant conditions and then analyzed. The purity of the recovered silver is 99.24%, and the average particle size of the silver nanoparticles is 68 nm.

• Corrosion Science and Technology
• /
• v.7 no.2
• /
• pp.130-133
• /
• 2008

Corrosion of silver by outgassed sulfur species from rubber has been investigated by means of quartz crystal microbalance technique (QCM) and cathodic reduction technique. Silver specimens were placed together with a rubber of predefined quantity in an enclosed environment. Corrosion progressed linearly with time and silver sulfide was found as the corrosion product during all the tests. No significant dependence on RH was observed, while the corrosion rate increased as temperature rose. Furthermore the corrosion rate increased logarithmically with the quantity of the rubber placed in the exposure environment. It may be suggested that the corrosion rate of silver is determined by the amount of outgassed sulfur species which is a function of temperature and the quantity of rubber contained in the exposure environment.

• Journal of Families and Better Life
• /
• v.27 no.2
• /
• pp.45-61
• /
• 2009

The purpose of this study was to develop an understanding of older consumers' lifestyle, and to provide the basic information for developing silver commodities and, in turn, to stimulate the silver industry which has received attention as a next-generation industry. The study divided elderly consumers into four lifestyle categories and analyzed the difference in demographic characteristics among these categories as well as differences in demand for silver products. Data were collected with questionnaire and analyzed with frequency analysis, factor analysis, K-means cluster analysis, one-way ANOVA, and a $x^2$ test using SPSS 15.0. Four different lifestyles categories were identified among elderly consumers : conservative and stability oriented (22 persons, 33.3% of the sample), progressive and relation oriented (22 persons, 15.0%), reality adapted (52 persons, 35.4%), and traditional (24 persons, 16.4%). The demand for silver products demands was significantly different among elderly consumers in the four different lifestyle groups.

• Journal of Radiation Industry
• /
• v.2 no.3
• /
• pp.149-154
• /
• 2008

The present study described an antimicrobial spray composition comprising nanosized silica-silver particles, in which nano-silver is bound to silica molecules and a water-soluble polymer, the nanosized silica-silver particles prepared by irradiating a solution comprising a silver salt, silicate and the water-soluble polymer with radiation rays. According to a surfactant addition, the compositions were not turbid and were colorless. Also samples (cotton fabrics and wallpaper) were treated with the compositions also did not cause any stains even after drying under sunshine and at $80^{\circ}C$. Our results suggested that the spray formulation product was of practical use to control indoor fungi.