• 접착 및 계면
• /
• 제24권2호
• /
• pp.54-59
• /
• 2023

은 나노와이어 기반 투명전극은 우수한 전도도와 투과도, 유연성을 가지고 있어 ITO 기반의 유연전극을 대체할 수 있는 차세대 유연투명전극으로 각광받고 있다. 그러나 은 나노와이어 기반 투명전극 제작에 사용되는 은 나노와이어 용액에 대한 이해가 부족하여 전자소자 응용 시 소자의 비정상적인 작동이나 전극 필름의 박리 문제가 종종 발생하곤 한다. 본 연구에서는 은 나노와이어 용액에 대한 이해를 높이고자 은 나노와이어 용액에 사용되는 첨가제 중 하나인 hydroxypropyl methylcellulose 접착력 증진제에 대한 연구를 진행하였으며, 접착력 증진제를 첨가함에 따라 은 나노와이어 용액의 특성이 어떻게 변화되고 이러한 용액을 사용하여 제작된 은 나노와이어 필름의 특성이 어떻게 변화되는지 연구하였다. 용액의 특성으로는 극성성분의 표면장력과 분산 성분의 표면장력이 측정되었으며, 필름 특성으로는 표면 에너지와 표면 형상, 은 나노와이어 밀도, 면저항 등이 분석되었다.

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.473-478
• /
• 2007

공침법을 이용하여 질산은($AgNO_3$)을 수산화아파타이트(hydroxyapatite)에 흡착시켜 복합항균제를 제조하였다. 질산은의 농도, 온도, 압력, 숙성시간에 따른 흡착된 은이온양의 변화를 관찰하였고, 은-수산화아파타이트 흡착의 최적조건을 얻었다. 제조된 은-수산화아파타이트를 ICP-MS, SEM-EDAX, DSC, XRD를 이용하여 물리적 화학적 특성을 고찰하였다. 또한 제조된 은-수산화아파타이트는 진탕플라스크실험법(shake flask method, KS M-146-2003)을 이용하여 양성균인 황색포도상구균(staphylococcus aureus, ATCC 6538)과 음성균인 대장균(escherichia coli, ATCC 25922)의 항균성을 확인하였다.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.277-283
• /
• 2005

In order to prepare high molecular weight poly(methyl methacrylate) (PMMA)/silver nanocomposite microspheres, methyl methacrylate was suspension-polymerized in the presence of silver nanoparticles at low temperature with 2,2'-azobis(2,4-dimethylvaleronitrile) as an initiator. The rate of conversion was increased by increasing the initiator concentration. When silver nanoparticles were added, the rate of polymerization decreased slightly. High monomer conversion (about $85\%$) was obtained in spite of low polymerization temperature of $30^{\circ}C$. Under controlled conditions, PMMA/silver microspheres with various number-average degrees of polymerization (6,000-37,000) were prepared. Morphology studies revealed that except for normal suspension microspheres with a smooth surface, a golf ball-like appearance of the microspheres was observed, due to the migration and aggregation of the hydrophilic silver nanoparticles at the sublayer beneath the microsphere's surface.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.975-982
• /
• 2010

잉크젯으로 인쇄된 실버 도선의 레이저 소결에 관한 연구를 수행하였다. 요구적출(DOD) 방식의 잉크젯 프린터를 이용하여 서로 다른 두께의 유리와 PET 기판에 실버 나노 잉크를 이용한 미세 도선을 인쇄하였으며, 인쇄된 실버 도선에 집광된 레이저 빔을 조사하여 소결하였다. 레이저 강도와 조사 시간을 달리하여 소결된 실버 도선의 비저항을 측정하였으며, 오븐을 이용한 소결 처리 결과와 비교하였다. 단순화된 이론식으로부터 레이저 강도, 조사 시간, 표면 반사율 및 기판의 물성에 따른 온도 증가를 추산하였으며, 추산된 온도 증가와 레이저 소결에 의한 전기전도도 향상의 관계에 대하여 논의하였다.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.64-71
• /
• 2018

Currently, functional patterns are formed by screen printing on stretchable films, and they are applied to wearable and stretchable devices. In this study, three types of silver paste were prepared using three polyester binders with different Tg and molecular weights in order to impart elasticity to the conductive pattern itself. Rheological properties and DSC measurements were performed for each silver paste. Then, each silver paste was screen printing and cured by an IR dryer to evaluate adhesive strength, pencil hardness, resistance and surface shape change according to strain. As a result, it was found that the silver paste using a binder with a low Tg and a high molecular weight has the smallest resistance change depending on the strain. Namely, it was found that it is most preferable to use a binder with a low Tg and a high molecular weight as the stretchable electrode.

• 마이크로전자및패키징학회지
• /
• 제18권4호
• /
• pp.63-70
• /
• 2011

Anorthite forming glass frits in amounts up to 25 vol% of the silver powder were added to improve the adhesion between the conductor pattern formed by thick film photoimageable process and the low temperature co-fired ceramics (LTCC) substrate. The sheet resistance of the conductor pattern was raised from 0.13 ${\Omega}/{\square}$ to 2.25 ${\Omega}/{\square}$ as the volume percentage of glass frit increased up to 25 vol%. The adhesion strength was improved with this glass frit increase, but it decreased when the glass content exceeded 20 vol% which are possibly attributed to the liquid pool effect and the reduced fracture toughness in the interface between conductor and LTCC layer. The shrinkage of the width of the conductor pattern decreased with the addition of glass contents.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.464-471
• /
• 2017

A metal mesh TCE film is fabricated using a series of processes such as UV imprinting of a transparent trench pattern (with a width of $2-5{\mu}m$) onto a PET film, filling it with silver paste, wiping of the surface, and heat-curing the silver paste. In this work nanosized (40-50 nm) silver particles are synthesized and mixed with submicron (250-300 nm)-sized silver particles to prepare silver paste for the fabrication of metal mesh-type TCE films. The filling of these silver pastes into the patterned trench layer is examined using a specially designed filling machine and the rheological testing of the silver pastes. The wiping of the trench layer surface to remove any residual silver paste or particles is tested with various mixture solvents, and ethyl cellosolve acetate (ECA):DI water = 90:10 wt% is found to give the best result. The silver paste with 40-50 nm Ag:250-300 nm Ag in a 10:90 wt% mixture gives the highest electrical conductance. The metal mesh TCE film obtained with this silver paste in an optimized process exhibits a light transmittance of 90.4% and haze at 1.2%, which is suitable for TSP application.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.122-127
• /
• 2006

Fundamental studies were carried out for an effective removal and recovery of silver from waste photo-developing solution by solvent extraction. The organic solvents examined for silver-extraction were ALIQUAT 336, D2EHPA, KELEX 100, and TBP. ALIQUAT 336, which is an anionic exchanger, was found to be efficient for the extraction of silver and the reason for this was considered to be due to the chloride ion contained in its structure. The extent of silver extraction was examined to increase with the concentration of ALIQUAT 336 until it reached 0.6 M and no more extraction was observed above this concentration. The extraction of silver by ALIQUAT 336 was found to reach its pseudo-equilibrium within a few minutes after the reaction started and additional slight increase in silver extraction was observed until 30 minutes of reaction time. The observed differences in silver extraction for artificial and actual waste solutions were considered to be based upon the different ionic form of silver-containing species in these solutions.

• 한국표면공학회지
• /
• 제40권1호
• /
• pp.6-10
• /
• 2007

For low-emissivity application on window glass, coalescence of thin film silver islands is crucial for high transmittance in the visible and high reflectance in the infrared. It is well known that the underlayer affects the growth mode. In this work, the effect of the underlayer on the growth of silver films deposited by filtered cathodic vacuum arc is discussed. While a nominal 0.1 nm niobium underlayer has promoted the coalescence of silver islands, a 0.2 nm layer did not show these features. From a thermodynamic approach, Nb seeding less one monolayer is considered to reduce the surface energy between the silver atoms and $Nb/TiO_2$ surface, resulting the change of its growth from 3D islands to 2D-layer modes. If the seed layer exceeds one monolayer, however, a rougher surface is formed because the surface energy of Nb itself is superior to that of $Nb-TiO_2$. The onset of silver layer on the roughened Nb surface is required more silver.

• 신재생에너지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2012

The screen printing has been widely used to form silver electrodes in solar cell device due to their simplicity of process. However, the wavy and irregular surface which is believed to be originated from a screen mask mesh and thixotropic characteristics of paste on screen printing process is well-known to give a negative effect on solar cell efficiency. The dispensing method that the silver paste is extruded through micro nozzle under a moderate pressure and coated on substrate can form the silver electrode without any wavy surface. In this study, we optimize the composition of silver paste and develop paste blending condition based on the thixotropic behavior of paste. The optimized paste shows a large thixotropic loop area which is related to an aspect ratio of electrode line and has the viscosity of 40 $Pa{\cdot}s$ at 40 s-1. The electrode line we finally obtainis 67.2 ${\mu}m$ in width and has an aspect ratio of 0.277.