• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.191-194
• /
• 1992

The tomb of the king Muryung, the 25th king of ancient Baegje dynasity in Korea, was proved to be constructed about 1500 years ago. The Physico-chemical characteristics were determined in order to investigate the pedogenic process for tomb soils. Clay and silt content inclosed down to 30~40cm soil depth. The increase of clay was 13.4% in the 10cm surface soil and the estimated time for 1% increase of clay in the profile was about 112 years. There were great changes in chemical properties in the 10cm surface soil, and considerable accumiration of salts and increase of catiom exchange capacity(CEC) down to 30cm depth. The alteration of primary minerals and formation of clay minerals were great in the 10cm surface soil and considerably reconized down to 50~60cm. The result suggested that the development of soil profile from the tomb parent material for the period was 10cm under the forest environment in Korea. The parent material of tomb soil was considered to be transported greyish green clored diorite from other place.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.129-134
• /
• 1997

Effect of soil moisture level on the growth of ginger plant was investigated through a pot experiment. The soil used for this study was collected from a newly reclaimed hillside land. The soil was a silty clay loam(19% sand, 57% of silt and 24% of clay), acidic in soil rection(pH 4.7, in $H_2O$) and low in organic matter content(1.2%). Soil moisture levels selected for the experiment were 10, 15, 20, 25, and 30% on weight basis. Under the soil moisture of 20-25%, the emergence ratio was 80-100%, 25 days alter planting. The performance of above ground parts was best under 20-25% of soil moisture. When the soil moisture content was far from 25%, high or low, the die out of above ground parts of ginger tended to increase. Under 20-25% of soil moisture the growth of roots was best and the occurrence of root rot was minimal.

• Journal of Aquaculture
• /
• v.8 no.2
• /
• pp.85-98
• /
• 1995

In Kunsan coastal areas, there are some plans to construct industrial zone and, it will affect physical and chemical parameters of marine environment of the area. As one of many environmental surveys on the aquacultural farm in Korean west coast, the survey on the bottom sediment characteristics of intertidal farm was conducted from May 1992 to April 1993. Dominant grain size was fine sand $(69-98\%)$ and the pH of sediment was ranged of $7.2\~9.1$. Especially the pH increased after embank was constructed. The water holding capacity was $11.1-28.1\%$ and showed high value in silt and clay area. The COD was 1.27 mg/g dry mud and increased after embank was constructed. The total organic matter content ranged of $0.84-8.11\%$ and the DO absorption was $0\~6.56 mg/g$ dry mud. The value of DO absorption showed low in winter and spring, but high in summer and fall. The total nitrogen and the sulfide were rang of $0\~402{\mu}g/g$ dry mud and $0\~122{\mu}g/g$ dry mud respectively. These values were high in summer and winter season, and higher in upper layer than that of lower layer in general.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.454-460
• /
• 2012

This study was conducted for determining the influence of Sediment Control Dam dredging on benthic macroinvertebrate communities in mountain stream of Gyeongsangbuk-do. The sediment control dams were surveyed before and after dredging from mountain streams of Yecheon, Yeongju and Bonghwa in Northern part of Gyeongsangbuk-do. Sampling was taken at upper and down from 3 experimental sites and 2 control sites during May to August 2011. The identified species before dredging were 56 belonged to 31 families, 11 orders, 6 classes and 4 phyla, but after dredging it has decreased to 51 species belonged to 27 families, 10 orders, 5 classes and 4 phyla. The microhabitat damage of benthic macroinvertebrates occurred at experimental sites after dredging of sediment control dams led to reduction of the number of species and individuals. Especially, upper stream of experimental sites showed the reduction of an average of 38% species. In general, species diversity indices and species richness indices decreased after dredging; however, dominance indices increased at experimental sites. In the upper stream of experimental sites, the microhabitat damaged and became pool due to dredging. Also, velocity of flow decreased and the river bed became simply due to the sedimentary matter being finer than sand and silt. As a result, composition of functional feeding groups and functional feeding groups were relatively simpler at upper stream and the degree of community differences was greater between upper and down stream. Also, Chironomidae spp., Ephemeridae spp., and Gomphidae spp. to prefer where slow velocity of flow and lentic increased in a greater rate, and the EPT/C index to indicate the balance of the community decreased.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.3
• /
• pp.13-19
• /
• 2016

The ultrasonic waves for monitoring concrete materials have been used to investigate the setting and hardening process of concrete. This paper presents the application of bender elements for monitoring the hardening properties of Controlled Low Strength Material (CLSM) and the characterization of shear waves in CLSM according to curing time. To ensure the early age properties and flow, the CLSM consists of CSA cement, sand, silt, water, fly ash, and accelerator. In addition, three different type specimens according to fine contents are mixed. A couple of bender elements are installed at the wall of measurement cell and the CLSM specimen are prepared at the measurement cell for 28 days. Experimental results show that the resonant frequency and shear wave velocities increase with an increase in the curing time, regardless of the fine contents. Up to ten hours, the amplitudes of shear waves also increase, and the resonant frequency and shear wave velocities at the same time increase as the fine contents increase. The shear wave measurement technique using the bender elements may be effectively used to evaluate the hardening properties of CLSM along the curing time.

• Journal of the Korean Geographical Society
• /
• v.40 no.6 s.111
• /
• pp.716-729
• /
• 2005

In the Yeongpyeong River, one of the branches of Hantan River, there 4 fluvial terraces are identified. During the Quaternary, lava flow from Hantan River had gone 4.5km into upstream Part of the Yeongpyeong River and damed its entrance, and resultantly its lower basin had become a lava-damed paleolake. This study deals with fluvial terrace surface classification, stratigraphic analysis, deposits analysis, and OSL age dating in from Gungpyeongri to Seongdongri in lower reach of Yeongpyeong River, in order to identify Seomorphological Process of the terrace landforms relating to duration of lava-damed paleolake. Terrace surface T4, named Baekeuiri Formation, has been located under Jeongok lava layer to indicate pre-lava river bed. Terrace surfaces T3 and T2 are supposed to be formed during paleolake time, based on $3{\~}4m$ thick sand deposits including pebble and cobble layers, and clay and silt layers intersected with sand ones in nearly horizontal bedding. Terrace T1 is estimated to be formed as post-lake fluvial terrace after dissection of lava dam, based on the more fresh phase of deposits and very low height from present riverbed. The results of the OSL age dating for the T3 deposit layers indicate approximately $33{\~}40ka$, and still lake phase at that time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.169-175
• /
• 1992

The Maximum Dry Density (${\gamma}_{dmax}$) and the Optimum Moisture Content (${\omega}_{opt}$) of the soil samples are determined from the compaction curve plotted with the laboratory compaction test results. But in this study three reported tests, and tests on the silty clay and the sandy silt samples are reviewed through the interpolation methods using an equation of the Moisture-Density relations induced from Lagrange's Interpolation Formula without drawing the compaction curves. As the results of the study ${\gamma}_{dmax}$ and ${\omega}_{opt}$, were calculated rapidly and simply using the equation and approached to the results from the compaction curves, and also due to the differences of the ${\gamma}_{dmax}$ and ${\omega}_{opt}$, calculated from the equation between the compaction curves were within $0.01g/cm^3$(0.5%) and 0.4% respectively the method in this study be recommended as a simple method determining ${\gamma}_{dmax}$ and ${\omega}_{opt}$, during the laboratory compaction tests.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.535-543
• /
• 2016

This study has been carried out to evaluate the CBR characteristics and the correlations among every soil properties of National road in Yeongnam region. Total of 480 soil samples were collected from 41 administrative districts for more than 30 years. Their physical and mechanical properties such as natural water content, the Atterberg limit, No. 200 sieve passing, the compaction test and the CBR test results were involved. The soils in Yeongnam region, SM, SC, SP and CL by USCS have predominated approximately 79%. The test results show that average CBR values of gravel and sand range from 12.7% to 20.3% and those of silt and clay range from 4.8% to 7.1%. It means that average CBR values of fine grained soils are less than a half of coarse grained one. Natural water content, No. 200 sieve passing, optimum moisture content and maximum dry density of soils are well correlated with CBR values. Especially, it presents that No. 200 sieve passing is the best correlation factor with CBR value. If consider the partition off this region into 6 zones of classified by mother rock, the correlation between CBR value and every soil properties tends to increase. It is suggested that tables, figures and the regressions described in this paper may be available for designers and engineers to understand the characteristics of an embankment materials in Yeongnam region.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.333-341
• /
• 2014

Since distribution and preservation of cultural artifacts in the submarine sediments are directly affected by not only ocean currents and tides, but also their composition, it is very important to investigate geological characteristics of sediments and ocean-sediment interactions for maritime archaeological survey. Physical properties of submarine sediments, which are collected by grab sampler and vibro-corer, are analyzed in order to investigate effects of submarine environment on development of maritime archaeological survey techniques. Result of physical property analysis showed that bulk density, shear strength, and magnetic susceptibility increase with depth, while water contents and porosity decrease with depth. Since the magnetic susceptibility of bedrock is about 40 times that of submarine sediments, it might impact greatly on the response of magnetic survey. Physical properties of sediments with depth and sediment classification by Folk's ternary diagram indicate that submarine sediment mainly consists of silt, and cultural artifacts can not penetrate no deeper than 1.5 m in sediments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.127-140
• /
• 2015

A fault is one of the critical factors that may lead to a possible ground collapse occurring in construction site. A fault core, however, possibly acting as a failure plane in whole fault zone, is composed of fractured rock and gouge nonuniformly distributed and thus can be characterized by its wide range of shear strength which is generally acquired by experimental method for stability analysis. In this study, we performed direct shear test and grain size distribution analysis for 62 fault core samples cropped from 12 different spots located in the vicinity of Kyongju and Ulsan, Korea. As a result, the range of shear strength representing the characteristics of fault cores in the study regions is determined with regard to vertical stress using a regression analysis for experiment data. The weight ratio of gravels in the samples is proportional to the shear strength and that of silt and clay is in inverse proportion to the shear strength. For most samples, the coefficient of determination is over 0.7 despite of inhomogeneity of them and consequently we determined the lower limit and upper limit of the shear strength with regard to the weight ratio by setting the confidence interval of 95%.