• Journal of the Korean GEO-environmental Society
• /
• v.16 no.6
• /
• pp.31-38
• /
• 2015

Recently, the participation on the development of the natural gas pipeline in Russia as well as the recent construction of the second Korean Antarctic research station, the Jangbogo station provide the research interests on the behavior of the permafrost ground. To investigate the effect of fines on the mechanical responses of frozen sands, unconfined compression tests were performed on the frozen sands with 0, 5, 10 and 15% of fine contents at -5, -10 and $-15^{\circ}C$. The poorly graded (SP) Joomunjin sand and kaolinite, silt with low plasticity (ML) were used for the preparation of the frozen soil specimens. The mechanical responses of the tested soils were investigated via unconfined compression tests in the temperature controlled laboratory and analyzed in terms of peak unconfined compressive strength and secant modulus at 50% of the peak strength. As the fine contents increase, the unfrozen water contents increase and thus the strength and stiffness of frozen soils decrease. The increment of the stiffness and strength due to the temperature decrease vary with the fine contents.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.83-96
• /
• 2012

The origins of beaches at Byeonsan Peninsular, as a pocket type, are classified to a sand barrier type and wave-cut type. The beaches had developed by the deposition of the silt and clay layers on the 10m height from sea level in the inner bay during climax era of postglacial transgression. At that time, some sands had blown toward the inland hills to form aeolian deposits. After postglacial sea-level stabilization, sometimes, there has been the negative budget of beach materials. Recently, beaches have been transformed by human impact such as construction of Saemangeum sea-wall, especially in the Byeonsan and Gosapo beaches being close to the sea-wall. So the speed of tidal currents become slower and comparatively depositoinal activity stronger. And the level of chemical weathering has been higher. In Byeonsan beach, the ratio of coarse sand decreased with higher ratio of finer materials and by beach erosion dissected runnels developed, running parallel to the coastline. In Gosapo beach, supply of suspended materials are increased through the Garyeok drainage gate, the sands tend to be finer.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.3
• /
• pp.41-55
• /
• 2016

The granulometric characteristics and chemical composition of the samples from the Bukpyeong myeon, Hainam gun, Jeollanam do were analyzed in this study. The samples were collected from the outcrop of coastal area where the height is about 30m. The burial age of the sediments also estimated by OSL(Optically Stimulated Luminescence) method. The origin and forming processes of the samples are not clear in this stage as limited number of evidences can be found. However it is suggested that the samples are not aeolian deposits originated from chinese loess by the chemical analysis. The mean diameter of samples were $5{\sim}6{\varphi}(silt)$ and are increased slightly downwards. The samples also well sorted. The samples have been heavily weathered by the chemical alteration index. The value of CIA increase downward rapidly at the upper part of outcrop, then stabilized afterwards. The vertical concentration changes ratio of cations varies; Si increases downwards while Fe, Ti, K and Mg decrease. There are fluctuation in concentration ratio of Na and Ca with increasing depth. The burial age of sample from upper part are estimated as $104.52{\pm}4.45ka\;BP$, while that of lower part are $136.10{\pm}6.52ka\;BP$, and they fall in to last part of MS6. The deposition rate for this site is found about 0.017mm/year. The uplift rate of the site is supposed to be 0.24~0.26m/ka with assumption of palaeo-sea level of +6m. However the origin of the sediment deposits should be explored and cleared.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.6
• /
• pp.123-132
• /
• 2019

This study is to estimate the spatial soil moisture using Terra MODIS (Moderate Resolution Imaging Spectroradiometer) satellite data and machine learning technique. Using the 3 years (2015~2017) data of MODIS 16 days composite NDVI (Normalized Difference Vegetation Index) and daily Land Surface Temperature (LST), ground measured precipitation and sunshine hour of KMA (Korea Meteorological Administration), the RDA (Rural Development Administration) 10 cm~30 cm average TDR (Time Domain Reflectometry) measured soil moisture at 78 locations was tested. For daily analysis, the missing values of MODIS LST by clouds were interpolated by conditional merging method using KMA surface temperature observation data, and the 16 days NDVI was linearly interpolated to 1 day interval. By applying the RNN-LSTM (Recurrent Neural Network-Long Short Term Memory) artificial neural network model, 70% of the total period was trained and the rest 30% period was verified. The results showed that the coefficient of determination ($R^2$), Root Mean Square Error (RMSE), and Nash-Sutcliffe Efficiency were 0.78, 2.76%, and 0.75 respectively. In average, the clay soil moisture was estimated well comparing with the other soil types of silt, loam, and sand. This is because the clay has the intrinsic physical property for having narrow range of soil moisture variation between field capacity and wilting point.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.481-481
• /
• 2016

하천퇴적물은 물의 순환과정에서 유역으로부터 유입되는 물질에 따라 조성이 변하게 된다. 특히 입자가 작은 토양과 유기성 물질들은 물순환과정에 이동성이 크게 나타나며, 인간에 의해 개발된 지역은 자연상태에 비해 이동하는 물질이 많이 나타나곤 한다. 본 연구에서는 하천에 건설된 보에 대한 퇴적물 조사를 실시함으로서 향후 수질관리에 필요한 기초 자료를 수집하고자 하였다. 본고에서는 금강과 낙동강에 건설된 보의 주요지점에 대한 퇴적물 조사를 실시하고 수질영향을 평가하였다. 조사는 홍수기전과 홍수기후로 구분하여 2회에 걸쳐 실시하였으며 물리적 성상과 화학적 항목에 대한 분석을 실시하였다. 입도분석 결과 금강 주요 10개 지점의 퇴적물 조성은 Sand, Silt와 Clay 성분이 혼합되어 있는 것으로 분석되었으며, 삼각좌표 분류법에 의한 토성은 대부분의 지점이 실트질양토(SiL)로 평가되었다. 완전연소가능량은 0.35~1.37로 전 지점에서 하천 호소 퇴적물 오염평가 기준의 유기물 함량기준 13%보다 높지 않은 것으로 나타났으며 홍수기 전 후에도 거의 유사하였다. 금강에서는 중금속뿐만 아니라 유기물 및 영양염류도 기준보다 낮게 나타났으며, 모든 항목에서 환경부예규인 하천 호소퇴적물 오염평가 기준보다 낮게 평가되었다. 하상 퇴적물이 수질에 미치는 영향을 평가하는 용출실험에서도 유기물 및 중금속 모두 수질에 미치는 영향은 거의 없는 것으로 평가되었다. 낙동강 주요 26지점의 입도분석 결과 퇴적물 조성은 대부분 Sand로 구성되어 삼각좌표 분류법에 의한 토성은 사토(S)로 평가되었다. 홍수기 전 후에 조사한 결과 완전연소가능량은 0.27~2.85으로 전 지점에서 하천 호소 퇴적물 오염평가 기준의 유기물 함량 기준보다 낮았으며 홍수기 전 후에도 거의 유사하였다. 화학적 성상 분석 결과 모든 항목에서 환경부예규인 하천 호소퇴적물 오염평가 기준보다 낮게 평가되었으며, 용출실험에서도 유기물 및 중금속 모두 수질에 영향을 거의 미치지 않는 것으로 평가되었다. 이번 조사는 4대강 건설 후 하상이 안정화 되지 않은 상태로 인해 지점간 특별한 경향성은 확인할 수 없었으며 보다 정확한 결과 도출을 위해서는 장기적인 조사를 통해 평가해야 할 것으로 판단되었다.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.153-165
• /
• 2019

A case study of monitoring and analysis of surface settlement induced by tunneling of Tabriz metro line 2 (TML2) is presented in this paper. The TML2 single tunnel has been excavated using earth pressure balanced TBM with a cutting-wheel diameter of 9.49 m since 2015. Presented measurements of surface settlements, were collected during the construction of western part of the project (between west depot and S02 station) where the tunnel was being excavated in sand and silt, below the water table and at an average axis depth of about 16 m. Settlement readings were back-analyzed using Gaussian formula, both in longitudinal and transversal directions, in order to estimate volume loss and settlement trough width factor. In addition to settlements, face support and tail grouting pressures were monitored, providing a comprehensive description of the EPB performance. Using the gap model, volume loss prediction was carried out. Also, COB empirical method for determination of the face pressure was employed in order to compare with field monitored data. Likewise, FE simulation was used in various sections employing the code Simulia ABAQUS, to investigate the efficiency of numerical modelling for the estimating of the tunneling induced-surface settlements under such a geotechnical condition. In this regard, the main aspects of a mechanized excavation were simulated. For the studied sections, numerical simulation is not capable of reproducing the high values of in-situ-measured surface settlements, applying Mohr-Coulomb constitutive law for soil. Based on results, for the mentioned case study, the range of estimated volume loss mostly varies from 0.2% to 0.7%, having an average value of 0.45%.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.36-43
• /
• 2012

Various methods are used to remediate soil contaminated with heavy metals or petroleum. In recent years, harsh physical and chemical remediation methods are being used to increase remediation efficiency, however, such processes could affect soil properties and degrade the ecological functions of the soil. Effects of soil washing, thermal desorption, and land farming, which are the most frequently used remediation methods, on the physicochemical properties of remediated soil were investigated in this study. For soils smaller than 2 mm, the soil texture were changed from sandy clay loam to sandy loam because of the decrease in the clay content after soil washing, and from loamy sand to sandy loam because of the decrease in the sand content and increase in silt content during thermal desorption, however, the soil texture remained unchanged after land farming process. The water-holding capacity, organic matter content, and total nitrogen concentration of the tested soil decreased after soil washing. A change in soil color and an increase in the available phosphate concentration were observed after thermal desorption. Exchangeable cations, total nitrogen, and available phosphate concentration were found to decrease after land farming; these components were probably used by microorganisms during as well as after the land farming process because microbial processes remain active even after land farming. A study of these changes can provide information useful for the reuse of remediated soil. However, it is insufficient to assess only soil physicochemical properties from the viewpoint of the reuse of remediated soil. Potential risks and ecological functions of remediated soil should also be considered to realize sustainable soil use.

• Journal of Korean Society on Water Environment
• /
• v.37 no.4
• /
• pp.286-295
• /
• 2021

The removal efficiency of road-deposited sediment (SDR) by road sweeping was analyzed by performing particle size analysis before and after road sweeping at four highways during May to December 2019. The SDR accounted for the largest proportion in the range of 250 to 850 ㎛ and the degree of its proportion had an effect on the particle size distribution curve. The particle size distribution of the collected sediments showed a similar distribution at all sites. Below 75 ㎛, the removal efficiency of SDR showed a constant value around 40%, but above 75 ㎛, it increased as the particle size increased. The removal efficiency was 82-90% (average 86%) for gravel, 66-93% (average 79%) for coarse sand, 35-92% (average 64%) for fine sand, 29-69% (average 44%) for very fine sand, 19-58% (average 40%) for silt loading, 10-59% (average 40%) for TSP, 13-57% (average 40%) for PM10, and 15-61% (average 38%) for PM2.5. SDR removal efficiency showed an average of 69% for the four highways. It was found that if the amount of SDR was less than 100 g/m², it was affected by the road surface condition and had a large regional deviation. As such, the amount of SDR and the removal efficiency increased. The fine particles, which have relatively low removal efficiency, contained a large amount of pollutants, which is an important factor in water and air pollution. Therefore, various measures to improve the removal efficiency of fine particles in SDR by road sweeping are needed.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.3
• /
• pp.231-238
• /
• 2021

BACKGROUND: Metal contamination of farmlands nearby abandoned mines is a serious environmental problem. This study was conducted to evaluate the efficiency of stabilizers on different type of the soils contaminated with metals. METHODS AND RESULTS: The texture of silt loam soil initially contaminated with heavy metal was artificially adjusted to loam and sandy loam by adding sand, and the soil organic matter content (1.5%) was also altered by adding peat to the soils at 3.5 and 8.0%. The soils were mixed with 3% (w/w) of each limestone, dolomite, and steel slag. For the soils with different textures, the bioavailability of As was found to be the lowest in sandy loam compared to others metals such as Cu, Pb, and Zn. The efficacy of limestone and dolomite was not significantly different compared to the soils having different organic matter contents, but the stabilization efficiency of steel slag increased as the soil organic matter content increased. Moreover, stabilizers showed inhibition effect on the uptake of metals to plant. CONCLUSION: The stabilizers were found as effective materials to immobilize metals in soil and to decrease plant uptake of metals. Studies are needed to deeply elucidate the interaction between influencing factors and various stabilizers.

• Geomechanics and Engineering
• /
• v.18 no.4
• /
• pp.407-415
• /
• 2019

A controlled low strength material (CLSM) is a highly flowable cementitious material used for trench backfilling. However, when applying vertical loads to backfilled trenches, shear failure or differential settlement may occur at the interface between the CLSM and natural soil. Hence, this study aims to evaluate the characteristics of the interface friction between the CLSM and soils based on curing time, gradation, and normal stress. The CLSM is composed of fly ash, calcium sulfoaluminate cement, sand, silt, water, and an accelerator. To investigate the engineering properties of the CLSM, flow and unconfined compressive strength tests are carried out. Poorly graded and well-graded sands are selected as the in-situ soil adjacent to the CLSM. The direct shear tests of the CLSM and soils are carried out under three normal stresses for four different curing times. The test results show that the shear strengths obtained within 1 day are higher than those obtained after 1 day. As the curing time increases, the maximum dilation of the poorly graded sand-CLSM specimens under lower normal stresses also generally increases. The maximum contraction increases with increasing normal stress, but it decreases with increasing curing time. The shear strengths of the well-graded sand-CLSM interface are greater than those of the poorly graded sand-CLSM interface. Moreover, the friction angle for the CLSM-soil interface decreases with increasing curing time, and the friction angles of the well-graded sand-CLSM interface are greater than those of the poorly graded sand-CLSM interface. The results suggest that the CLSM may be effectively used for trench backfilling owing to a better understanding of the interface shear strength and behavior between the CLSM and soils.