• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.314-324
• /
• 2010

The purpose of this study is to obtain the dyed-fabrics of the elaborate patterns using the natural dye powders extracted from Galla Rhois, Sophorae Flos Immaturus, Clove, Sappan Wood, Madder, Log Wood and Japanese Green Alder. Specific informations on the separation and powder-making of each colorant were disclosed. Appropriate printing paste preparation and printing conditions including the viscosity and mordant concentration in the printing paste were investigated. The dyeability and colorfastness of the screen-printed silk fabrics with the colorant powders were discussed in terms of practical applicability. The deodorization and antimicrobial activities of the silk fabrics screen-printed with natural dyes were also assessed.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.15-22
• /
• 1999

일반적으로 빌드업 다층 인쇄회로기판은 에칭, 도금등의 습식공정에 의해 제작이 이루어지므로 많은 장비와 많은 시간이 필요하게 된다. 이러한 습식공정은 양산에는 적합하지만 개발단계에서는 그리 적합하지 않은 방법이다. 본 연구에서는 스크린 인쇄기술을 도입하여 빌드업 다층 인쇄회로기판을 제작하여 보았다. 절연성 재료로는 광경화성수지 또는 열경화성수지를 사용하였으며 전도성 재료로는 전도성 페이스트를 사용하였다. 층간의 전기적 연결을 담당하는 비아와 회로를 형성하기 위해 스크린 인쇄공정을 통해 전도성 페이스트를 인쇄 하였다. 이러한 방법을 통해 제품의 개발 단계에서 기존의 빌드업 다층 인쇄회로기판 제작 공정과 비교하여 좀더 효율적인 방법을 제시하였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2010년도 제3회 국제학회
• /
• pp.72-73
• /
• 2010

• 전기학회논문지P
• /
• 제62권2호
• /
• pp.95-97
• /
• 2013

$CaTiO_3$ thin films using silk screen printing technology were fabricated and their humidity sensitive characteristics have been investigated. The specimens were sintered at $1000^{\circ}C$, $1050^{\circ}C$, $1100^{\circ}C$ for 1 hour and the best humidity sensitivity was shown in the specimens sintered at $1000^{\circ}C$. The humidity sensitivity decreased with increasing measuring frequencies and was stable at different abient temperatures. Hysteresis of impedance variation with increasing and decreasing relative humidity were negligible.

• 전기학회논문지
• /
• 제63권9호
• /
• pp.1227-1232
• /
• 2014

The purpose of this paper is to establish the optimum fabricating condition of specimens using silk screen printing, and to develop humidity sensor which has good humidity sensing properties. The specimens are fabricated under the condition of 90[wt%] $SnO_2$-10[wt%] $TiO_2$, and their microstructure, crystalline structure, humidity sensing properties are examined. From the microstructure analyses, porosity is best at 700[$^{\circ}C$]. From the crystalline structure analyses, intensity of peak becomes strong according to increasing heat treatment temperature. From the humidity sensing properties analyses, an overall results of capacitance changes, linearity and hysteresis for the specimens is best at 600[$^{\circ}C$] and 700[$^{\circ}C$]. Capacitance of specimens increases according to decreasing measurement frequency, and to increasing relative humidity.

• 대한가정학회지
• /
• 제38권9호
• /
• pp.119-130
• /
• 2000

The purpose of this study was to confirm the possibility of screen printing with Natural dyes. The coloring matter such as sappan wood was used in order to obtain the colorant powder through the processes of extraction, low pressure concentration and the spray dry. After the screen printing on silk and cotton fabrics with colorant, K/S value changes of color and color fastness were measured. The main resets were as follows : 1. The viscosity of printing thickeners of sappan wood powder was about 15,200 cps, and the highest K/S value of the fabrics printed with sappan wood was obtained at 90$\pm$2$\^{C}$ of steaming temperature and 80 minutes of steaming time. 2. For the fabrics printed with sampan wood, adding of urea was not effective, since the more the concentration of urea increased, the more K/S values decreased. 3. For the natural dyes printing, the more the concentration of colorants increased, the more K/S values increased. In general, the K/S values of the printed fabrics were higher when treated with mordants rather than without mordants. Specifically, the λmax sappan wood was 520∼570 nm, and the K/S value was highest when treated with Cu mordant and lowest when treated with Sn. 4. Generally, the color fastness was relatively fair.

• 접착 및 계면
• /
• 제18권1호
• /
• pp.25-32
• /
• 2017

본 연구는 디스플레이 모듈 접합 공정에 적용하기 위해 자외선 경화형 아크릴계 점착제(PSA)에 실리카 나노 입자를 함량별로 첨가하여 실크 스크린 인쇄성 평가를 실시하였고, 유변학적 성질이 인쇄성 및 점착력에 미치는 영향을 고찰하고자 하였다. 점착제(PSA) 중합을 위한 기본 처방으로 2-ethylhexyl acrylate(2-EHA)와 acrylic acid(AA)를 93:7 비율로 고정하고 butyl acylate(BA), 2-hydroxyethyl acrylate(2-HEA)를 첨가하였다. 추가로 나노 입자는 친수성 및 소수성을 가지는 AEROSIL R974 및 AEROSIL 200을 각각 사용하였다. 나노 입자 함량이 4 또는 7 phr 이상 사용함에 따라 G', ${\eta}^*$ 값이 급격히 증가하였으며, 친수성 나노 입자 AEROSIL 200을 7 phr 이상 첨가했을 때에는 스크린 인쇄 시 투과성이 저하되었다. 점착력은 나노 입자 함량이 증가할수록 감소되는 경향을 보였으며, 친수성인 AEROSIL 200의 경우 점착력이 더욱 저하됨을 알 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제17권8호
• /
• pp.685-692
• /
• 2017

회화적 기법의 제작 방식은 애니메이션에서 종종 활용된다. 그 중 판화의 제작 방식은 애니메이션 제작에 활용 되고 있으며 실크스크린과 목판화는 자주 활용되어 기법 연구의 사례도 많으나 동판화를 활용한 애니메이션의 제작 또는 연구의 사례는 빈약한 실정이다. 따라서 본 연구는 동판화 애니메이션 제작의 교과서적 표본이 되고있는 폴란드의 영화감독이자 표현주의 메조틴트 동판화 애니메이션 감독 피오트르 듀말라(Piotr Dumala)의 작품 사례를 통해 동판화 애니메이션의 제작 기법을 소개 하고자 한다. 메조틴트 동판화만이 표현해 낼 수 있는 독특한 질감과 운동감, 깊이감, 조형적 특징을 분석한다. 애니메이션 작가들에게 동판화 기법을 에칭과 인그레이빙으로 나누어소개함으로써 회화적 애니메이션 제작 기법의 폭을 한 단계 확장시킬 수 있다.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.412-423
• /
• 2016

This paper explores the possibility, and suggests an experimental procedure, of industrial application of traditional textile design techniques, such as hand silkprinting and natural dyeing. Theoretical and traditional background of this study is William Morris and his followers' Arts and Crafts Movement from the late 19th century to the early 20th century, which laid the philosophical as well as technical foundations of modern textile design tradition. Based on the basic understanding of the design philosophy, and starting from the design techniques of Morris and his successors, I made some experimental and systematic color plans reflecting and exploiting the physical traits and structure of jacquard woven silk material fabrics. And I applied hand silkscreen printing techniques on the jacquard silk fabrics of my own making, while testing various color combinations of natural dyes. After finishing final processing of design samples, I could get textile design products which met the criteria of my original expectation, i.e., eco-friendly and aesthetic design samples that can also be produced in automatized mass production system of contemporary textile industry. The conclusion of this experimental study is that I can expect the natural dyeing techniques, jacquard silk fabrics design techniques, silkprinting techniques, and the basic processes used in this study to be safely applied for contemporary commercial textile industry utilizing automatized silkscreen printing system and digital printing devices.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.827-832
• /
• 2005

Dual band internal antennas were fabricated with Ag conducting paste of various preparation conditions and different print thickness by silk screen print. We have investigated microwave properties were compared Ag conducting paste antenna with copperplate antenna at 800 MHz and 1,800 MHz. Gain of Ag conducting paste antenna was improved when preparation conditions were the single size Ag particle, using dry type resin and high Ag containing percent. However, it was lower than that of copperplate antenna within $0.1\~2.0dBi$ at 800MHz. In addition, it was improved at 800MHz when thickness of Ag conducting paste was printed more than skin depth but it was held after critical print thickness. On the other hand, it was reached level of copperplate antenna at 1,800MHz.