• The Journal of Korean Physical Therapy
• /
• 제26권3호
• /
• pp.147-155
• /
• 2014

Purpose: This study was to determine the effects of before and after application of silicone sleeve on balance and muscle strength in anterior cruciate ligament (ACL) reconstruction patients. Methods: 13 subjects who had one or more months after ACL surgery were involved. Dynamic balance, timed up and go (TUG), stair step, vertical jump, proprioception and isokinetic knee strength were measured while subjects under taped, untapped and silicone sleeve conditions. Results: For 30 seconds one-leg standing, there was a significant improvement under silicone sleeve on operated side with eyes open and both taping and silicone sleeve revealed similar effects with eyes closed (p<0.01). Application of silicone sleeve showed significant effects in proprioceptive function on the operated side compared to both taping and none (p<0.05). For stair step test, TUG and vertical jump was a tendency to improve after application of silicone sleeve, but no significant different. Muscle strength on operated side of quadriceps and hamstring was significantly improved compared with none or taping(p<0.05). Conclusion: Silicone sleeve application for ACL reconstruction patients was effective immediately on improving strength and balance. Therefore, depending on the intended use and the disease is considered appropriate use of silicone sleeve will be able to help prevention and functional movement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1216-1217
• /
• 2008

A description is given of impregnated silicone rubber used in accessories for application on outdoor termination (EB-A). We examines the effects of swelling and mechanical/electrical characteristics for impregnated silicone rubber to develop slip on type sleeve of silicone material. There are semi-conductive silicone rubber and insulation silicone rubber. This examination is monitored as a function of the viscosity and temperature of oil during 30hr. We measure elongation at breakdown and AC breakdown strength and volume resistivities of the oil-impregnated silicone rubbers. The measured values are compared to initial value as function of stress relief cone.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.623-624
• /
• 2007

This work examines the effects of swelling MI type HVDC cable oil on the semiconductive silicone rubber and silicone rubber as used in accessories for application on outdoor termination (EBA) slip on sleeve. The behavior of volume resistivity is monitored as a function of the amount of cable oil diffused into the material. Resistivities of semiconductive silicone samples up to the typical insulator range (${\sim}10^{10}{\Omega}-cm$) are observed as a consequence of swelling due to the presence of the diffused oil. The measured volume resistivities of the oil-impregnated semiconductive silicone rubber are compared to desired value as function of stress relief cone.

• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.741-752
• /
• 2022

Earlier works have shown that excessive shear stiffness at the steel-concrete interface causes a non-uniform distribution of shear force in composite structures. When the shear studs are wrapped at the fixed end with flexible materials with a low elastic modulus, the shear stiffness at the interface is reduced. The objective of this study was to investigate the effect of silicone rubber-sleeve mounted on shear studs on the shear stiffness of steel-concrete composite structures. Eighteen push-out tests were conducted to investigate the mechanical behavior of silicone rubber-sleeved shear stud groups (SRS-SSG). The dimension and arrangement of silicon rubber-sleeves (SRS) were taken into consideration. Test results showed that the shear strength of SRS-SSG was higher than that of a shear stud group (SSG), without SRS. For SRS-SSG with SRS heights of 50 mm, 100 mm, 150 mm, the shear strengths were improved by 13%, 20% and 9%, respectively, compared to the SSG alone. The shear strengths of SRS-SSG with the SRS thickness of 2 mm and 4 mm were almost the same. The shear stiffness of the SRS-SSG specimens with SRS heights of 50 mm, 100 mm and 150 mm were 77%, 67% and 66% of the SSG specimens, respectively. Test results of specimens SSG-1 and predicted values based on the three design specifications were compared. The nominal single stud shear strength of SSG-1 specimens was closest to that calculated by the Chinese Code for Design of Steel Structures (GB50017-2017). An equation is proposed to consider the effects of SRS for GB50017-2017, and the predicted values based on the proposed equation agree well with the tested results of SRS-SSG.

• 복식
• /
• 제66권6호
• /
• pp.32-45
• /
• 2016

The purpose of this study is to propose changes that can be made to improve nurse uniforms in terms of outfit and functionality based on actual wearing conditions and nurse's preference. The proposed nurse uniform was composed of a blouse and pants. The design was as follows: the blouse had short set-in sleeve with China collar, a princess line, and it came down to middle hip. Armhole action pleats and back inverted pleats were embedded for convenient arm movements. The pants waist had a rubber band at the back waist, and the crotch length and the knee width were increased for activity. To make the pocket more accommodative, separate pocket slots treated with silicone were added to prevent belongings from coming out of the pocket. The pink tone of the uniforms, as well as the stripes on the blouses and spandex incorporated pants were based on nurses' preference. the nurse uniforms were produced after measuring the size of women in the age of 25 to 29, and the uniform patterns were corrected after two wearing experiments. Wearing test was examined in terms of appearance and functionality. For appearance, experts gave the uniforms a mean rating of 4.30, and nurses gave a mean rating of 4.00. Functionality was evaluated in terms of ease of activity and storage aspects. The total mean of ease of activity in nursing service was 4.30, whereas the evaluation of storage in terms of pocket position and convenience was 3.80.

• Journal of Chest Surgery
• /
• 제42권1호
• /
• pp.63-71
• /
• 2009

배경: 기관 협착의 치료방법은 비교적 덜 침습적인 기관지내시경을 이용한 시술 또는 침습적인 방법인 구역절제술과 문합의 방법이 있으나 가끔은 환자의 임상적 특징에 따라 이 모든 방법이 불가능할 때도 있다. 최근 실리콘 T-튜브 스텐트가 안전한 치료 대안이 되고 있다. 우리는 다양한 기저질환을 가진 기관 협착 환자에서 T-튜브의 중단기 결과를 조사하였다. 대상 및 방법: 1997년 1월부터 2007년 4월까지 10년 동안 T-튜브로 기관협착을 치료받은 환자 57명을 후향적으로 검토하였다. 환자의 의무기록과 영상검사를 기초로 하여, 임상적인 결과와 T-튜브 제거유무를 조사하였다. 결과: T-튜브와 연관된 합병증과 사망은 없었다. 경과 관찰 기간 동안 1명의 환자는 협착부위 절제와 재건술을 받았다. 13명의 환자들(13/57, 22.8%)은 성공적으로 T-튜브를 제거하여 더 이상 다른 처치는 필요하지 않았다. 또 다른 4명의 환자는 기관연화와 기관협착의 재발로 T-튜브 제거 후 다시 삽입하였다. 4명의 환자들은 기저질환과 암으로 사망하였다. 성별과 T-튜브 삽입 전 기관절개술 유무는 T-튜브 제거에 상당한 영향을 미치나 다변량 분석에서는 성별만이 T-튜브 제거 성공의 표지자로 밝혀졌다. 성별 (p=0.033)과 이전의 기관절개술(p=0.036)은 T-튜브 제거 성공군과 실패군 간의 2가지 다른 요소였다. 결론: T-튜브는 여러 원인에 의해 유발된 기관 협착에서도 믿을 만한 기도유지를 제공하였다. T-튜브는 중단기 동안 기관협착의 치료에 안전하고 효과적인 방법이라고 생각된다.