• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1292-1294
• /
• 1993

This paper proposes a new structure of polycrystalline silicon(poly-Si) thin film transistor(TFT) having a thick gate-oxide below the gate edge. The new structure is fabricated by the gate re-oxidation in wet ambient. It is shown that the thick gate-oxide below the gate edge is effective in reducing the leakage current and the gate-drain overlap capacitance. We have simulated this device by using the SSUPREM4 process simulator and the SPISCES-2B device simulator. As a simulation result it is found that the new structure provides a low tentage current less than 0.2 pA and achieves a on/off ratio as high as $5{\times}10^7$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.252-257
• /
• 1994

A non-uniform finite-difference Thin Film Transistor Simulation Program (TFTSP) has been developed for hydrogenated amorphous silicon TFTs. TFTSP was developed to remove as many of simplifying assumptions as possible and to provide flexibility in the modeling of TFTs so that different model assumptions may be analyzed and compared. In order to insure its usefulness and versatility as an analytic and design tool it is important for the code to satisfy a number of conditions. However, at the beginning stage of the program development, this paper shows that the code can compute the static terminal characteristics of a-Si:H TFTs under a wide range of bias conditions to allow for comparison of the model with experiment. Some of those comparisons include transfer characteristics and I-V characteristics. TFTSP will be refined to conveniently model the performances of TFTs of different designs and to analyze many anomalous behaviors and factors of a-Si:H TFTs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 학술대회 및 기술세미나 논문집 디스플레이 광소자
• /
• pp.62-63
• /
• 2006

In this paper, the characteristics of polycrystalline silicon thin-film transistors (poly-Si TFTs) fabricated on polymer substrates are investigated. The a-Si films was laser annealed by using a XeCl excimer laser and a four-mask-processed poly-Si TFT was fabricated with fully self-aligned top gate structure. The fabricated nMOS TFT showed field-effect mobility of $30cm2/V{\cdot}s$, on/off ratio of 105 and threshold voltage of 5 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.430-431
• /
• 2006

This letter reports the fabrication of polycrystalline silicon thin-film transistors (poly-Si TFT) on flexible plastic substrates using amorphous silicon (a-Si) precursor films by sputter deposition. The a-Si films were deposited with mixture gas of argon and helium to minimize the argon incorporation into the film. The precursor films were then laser crystallized using XeCl excimer laser irradiation and a four-mask-processed poly-Si TFTs were fabricated with fully self-aligned top gate structure.

• Journal of Korean Vacuum Science & Technology
• /
• 제2권2호
• /
• pp.97-100
• /
• 1998

We have investigated the effects of crystalline activation on solid phase crystallization (SPC) of amorphous silicon (a-Si) thin films. Wet blasting and self ion implantation were employed as the activation treatments to induce macro or micro crystalline damages on deposited a-Si films. Low temperature and larger grain crystallization were obtained by the applied two-step activation. High degree of crystallinity was also observed on both furnace and rapid SPC. crystalline activations showed the promotion of nucleation on the activated regions and the retardation of growth in an amorphous matrix in SPC. The observed behavior of two-step SPC was strongly dependent on the applied activation and annealing processes. It was also found that the diversified effects by macro and micro activations on the SPC were virtually diminished as the annealing temperature increased.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권2호
• /
• pp.116-120
• /
• 1999

Possible role of hydrogen atoms on the formation of microcrystalline silicon films was schematically investigated using a plasma enhanced chemical vapor deposition system. A layer-by-layer technique that can alternate deposition of ${\alpha}$-Si thin film and then exposure of H2 plasma was used for this end. The experimental process was extensively carried out under different hydrogen plasma times (t2) at a fixed number of 20 cycles in the deposition. structural properties, such as crystalline volume fractions and grain shapes were analyzed by using a Raman spectroscopy and a scanning electron microscopy. Electrical transports were characterized by the temperature dependence of the dark conductivity that gives rise to the calculation of activation energy (Ea). Optical absorption was measured using an ultra violet spectrophotometer, resulting in the optical energy gap (Eopt). Our experimental results indicate that both of the hydrogen etching and the structural relaxation effects on the film surface seem to be responsible for the growth mechanism of the crystallites in the ${\mu}$c-si films.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.54-58
• /
• 1999

We deposited diamond-like carbon (DLC) films using ion beam sputtering of a graphite target on flat substrates for use as a thin film field emitter. An n-type silicon wafer, titanium-coated silicon, and indium tin oxide (ITO) coated glass were used as a substrate. All films exhibited a sudden increase in the emission after a breakdown occurred at high voltage. The morphology of the films after the breakdown depended on the substrate. On ITO and Ti substrates, the DLC film peeled off upon breakdown, but on the Si substrate the surface melting due to breakdown resulted in the formation of various structures such as a sharp point, mound, and crater. By scanning the deformed surface with a tip anode, we found that the emission was concentrated at the deformed sites, indicating that the field enhancement due to the morphology change was responsible for the increased emission.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.502-505
• /
• 2004

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a SiC (Silicon Carbide) thin film. SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A homeotropic alignment of nematic liquid crystal by ion beam (IB) exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is maintained by the ion beam alignment method on the SiC thin film surface until annealing temperature of $300^{\circ}C$. Consequently, homeotropic alignment effect of liquid crystal and the good thermal stability by the ion beam alignment method on the SiC thin film layer can be achieved.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.19-24
• /
• 2019

In this study, the Ag nano-dots structure was applied to the textured wafer surface to improve the light trapping effect of crystalline silicon solar cell. The Ag nano-dots structure was formed by the annealing of Ag thin film. Ag thin film deposition was performed using a thermal evaporator. The effect of light trapping was compared and analyzed through light reflectance measurements. The optimization process of the Ag nano-dots structure was made by varying the thickness of Ag thin film, the annealing temperature and time. The thickness of Ag thin films was in the range of 5 ~ 20 nm. The annealing temperature was in the range of 450~650℃ and the annealing time was in the range of 30 ~ 60 minutes. As a result, the light reflectance of 10 nm Ag thin film annealed at 650℃ for 30 minutes showed the lowest value of about 9.67%. This is a value that is about 3.37% lower than the light reflectance of the sample that has undergone only the texturing process. Finally, the change of the light reflectance by the HF treatment of the sample on which the Ag nano-dots structure was formed was investigated. The HF treatment time was in the range of 0 ~ 120 seconds. As a result, the light reflectance decreased by about 0.41% due to the HF treatment for 75 seconds.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.200-204
• /
• 2011

이 논문에서는 반도체의 기판으로 사용되는 Si(silicon)기판과 금속배선 물질인 Cu(copper)의 확산을 효과적으로 방지하기 위한 W(Tungsten)-C(Carbon)-N(Nitrogen) 확산방지막을 제시하였고, 시료 증착을 위하여 rf magnetron sputter를 사용하여 동일한 증착조건에서 질소(N)의 비율을 다르게 증착한 후 시료의 열적 안정성 측정을 위하여 상온에서 $800^{\circ}C$까지 각각 질소 분위기에서 30분간 열처리 과정을 실시하여 열적 손상을 인가하였다. 이후 Nanoindentation 기법을 이용하여 총 16 points에서 Elastic modulus와 Weibull distribution을 측정하였다. 그 결과 질화물질이 고온에서 물성변화가 적게 나타나는 것을 알 수 있었고, 온도변화에 따른 박막의 균일도와 결정성 또한 질화물질에서 더 안정적이었다.