• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1522-1526
• /
• 2005

In this study, the fabrication of large area silicon mirror is accomplished by anisotropic etching using MEMS for implementation of integrated optical pickup and the process condition is also established for improving the mirror surface roughness. Until now, few results have been reported about the production of highly stepped $9.74^{\circ}$ off-axis-cut silicon wafer using wet etching. In addition rough surface of the mirror is achieved in case of long etching time. Hence a novel method called magnetorheolocal finishing is introduced to enhancing the surface quality of the mirror plane. Finally, areal peak to valley surface roughness of mirror plane is reduced about 100nm in large area of $mm^2$ and it is applicable to optical pickup using infrared wavelength.

• Journal of the Optical Society of Korea
• /
• 제14권2호
• /
• pp.163-169
• /
• 2010

Novel wafer-level fabrication of a glass ball-lens is realized for optoelectronic applications. A Pyrex wafer is bonded to a silicon wafer and cross-cut into a square-tile pattern, followed by wet-etching of the underlying silicon. Cubes of Pyrex on the undercut silicon are then turned into ball shapes by thermal reflow, and separated from the wafer by further etching of the silicon support. Radial variation and surface roughness are measured to be less than ${\pm}3\;{\mu}m$ and ${\pm}1\;nm$, respectively, for ball diameter of about $500\;{\mu}m$. A surface defect on the ball that is due to the silicon support is shown to be healed by using a silicon-optical-bench. Optical power-relay of the ball lens showed the maximum efficiency of 65% between two single-mode fibers on the silicon-optical-bench.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.121-127
• /
• 2008

This paper presents design and fabrication of optimized geometry structure of electrostatic inkjet head. In order to verify effect of geometry shape, we simulate electric field intensity according to the head structure. The electric field strength increases linearly with increasing height of the micro nozzle. As the nozzle diameter decreases, the electric field along the periphery of the meniscus can be more concentrated. We design and fabricate the electrostatic inkjet heads, hole type and pole type, with optimized structure. It was fabricated using thick-thermal oxidation and silicon micromachining technique such as the deep reactive ion etching (DRIE) and chemical wet etching process. It is verified experimentally that the use of the MEMS inkjet head allows a stable and sustainable micro-dripping mode of droplet ejection. A stable micro dripping mode of ejection is observed under the voltages 2.5 kV and droplet diameter is $10\;{\mu}m$.

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.140-143
• /
• 2013

Lowering surface reflectance of silicon wafer by texturization is one of the most important processes to improve the efficiency of silicon solar cells. Generally, the texturing of crystalline silicon was carried out using alkaline solution. The average reflectance of this method was 11% at the wavelength between 400 and 1,000 nm. In this study, the wafers were first texturing by NaOH solution at $80^{\circ}C$ for 35 min. Then the wafers were texturing by $SF_6$ and $O_2$ plasma in RIE (Reactive Ion Etching). The average reflectance of two step texturing was reduced to below 5% at the wavelength between 400 and 1,000 nm.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3451-3455
• /
• 2013

Single-crystalline silicon nanowires (SiNWs) were fabricated by using an electroless metal-assisted etching of bulk silicon wafers with silver nanoparticles obtained by wet electroless deposition. The etching of SiNWs is based on sequential treatment in aqueous solutions of silver nitrate followed by hydrofluoric acid and hydrogen peroxide. SEM observation shows that well-aligned nanowire arrays perpendicular to the surface of the Si substrate were produced. Free-standing SiNWs were then obtained using ultrasono-method in toluene. Alkyl-derivatized SiNWs were prepared to prevent the aggregation of SiNWs and obtained from the reaction of SiNWs and dodecene via hydrosilylation. Optical characterizations of SiNWs were achieved by FT-IR spectroscopy and indicated that the surface of SiNWs is terminated with hydrogen for fresh SiNWs and with dodecyl group for dodecyl-derivatized SiNWs, respectively. The main structures of dodecyl-derivatized SiNWs are wires and rods and their thicknesses of rods and wire are typically 150-250 and 10-20 nm, respectively. The morphology and chemical state of dodecyl-derivatized SiNWs are characterized by scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.199-199
• /
• 2009

실리콘을 기판으로 하는 대부분의 태양전지에서는 표면반사에 의한 광 에너지 손실을 최소화 시키고자 습식에칭 (wet etching)에 의한 텍스쳐링 처리가 이루어진다. 그러나 습식 에칭은 공정 과정이 번거롭고 비용이 많이 든다. Inductively Coupled Plasma Etcher 장비를 이용한 플라즈마 에칭 (plasma etching)을 실리콘 표면에 적용하여 공정을 간단하고, 저렴하게 하며 반사도를 획기적으로 낮추는 기술을 개발되었다. 플라즈마 에칭으로 형성된 나노구조는 내부전반사를 일으키며 대부분의 태양에너지를 흡수한다. 나노구조는 필라(pillar)의 형태로 나타나며, 이는 플라즈마 에칭 시 발생하는 이온폭격과 에칭 측벽 식각 보호막 (SiOxFy : Silicon- Oxy-Fluoride)의 형성 때문이다. 최저의 반사도를 얻기 위해서 나노필라 형성에 기여하는 플라즈마 에칭 시간, RF bias power, SF6/O2 gas ratio의 변화에 따른 실험이 진행되었다. 플라즈마 발생 초기에는 표면의 거칠기만 증가할 뿐 필라가 형성되지 않지만 특정조건에서 4um 이상의 필라를 얻는다. 이 구조에 알루미늄 전극을 형성하여 전기적 특성을 관찰하였다. 플라즈마 에칭을 적용하여 제작된 태양전지는 표면의 반사도가 가시광 영역에서 약 1%에 불과하며, 마스크 없이 공정이 가능한 장점이 있다.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.211-215
• /
• 2017

Reactive Ion Etching (RIE) and wet etching are employed in existing texturing processes to fabricate solar cells. Laser etching is used for particular purposes such as selective etching for grooves. However, such processes require a higher level of cost and longer processing time and those factors affect the unit cost of each process of fabricating solar cells. As a way to reduce the unit cost of this process of making solar cells, an atmospheric plasma source will be employed in this study for the texturing of crystalline silicon wafers. In this study, we produced the atmospheric plasma source and examined its basic properties. Then, using the prepared atmospheric plasma source, we performed the texturing process of crystalline silicon wafers. The results obtained from texturing processes employing the atmospheric plasma source and employing RIE were examined and compared with each other. The average reflectance of the specimens obtained from the atmospheric plasma texturing process was 7.88 %, while that of specimens obtained from the texturing process employing RIE was 8.04 %. Surface morphologies of textured wafers were examined and measured through Scanning Electron Microscopy (SEM) and similar shapes of reactive ion etched wafers were found. The Power Conversion Efficiencies (PCE) of the solar cells manufactured through each process were 16.97 % (atmospheric plasma texturing) and 16.29 % (RIE texturing).

• 한국생산제조학회지
• /
• 제25권1호
• /
• pp.62-67
• /
• 2016

This paper presents a silicon nanostructure array embedded in a polymer film. The silicon nanostructure array was fabricated by using basic microelectromechanical systems (MEMS) processes such as photolithography, reactive ion etching, and anisotropic KOH wet etching. The fabricated silicon nanostructure array was transferred into polymer substrates such as polymethyl methacrylate (PMMA), polyethylene terephthalate (PET), and polycarbonate (PC) through the hot-embossing process. In order to determine the transfer conditions under which the silicon nanostructures do not fracture, hot-embossing experiments were performed at various temperatures, pressures, and pressing times. Transfer was successfully achieved with a pressure of 1 MPa and a temperature higher than the transition temperature for the three types of polymer substrates. The transferred silicon nanostructure array was electrically evaluated through measurements with a semiconductor parameter analyzer (SPA).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.293-294
• /
• 2008

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.569-573
• /
• 2014

We demonstrate a low-cost, superbly efficient way of etching for the nano-, and micro-sized pyramid patterns on (100)-oriented Si wafer surfaces for use as a patterned master. We show a way of producing functional optical films for the viewing angle direction brightness-enhancement of Lambertian LED (light emitting diode)/OLED (organic light emitting diode) planar lighting applications. An optimally formulated KOH (Potassium hydroxide) wet etching process enabled random-positioned, and random size-distributed (within a certain size range) pyramid patterns to be developed over the entire (100) silicon wafer substrates up to 8" and a simple replication process of master patterns onto the PC (poly-carbonate) and PMMA (poly-methyl methacrylate) films were performed. Haze ratio values were measured for several film samples exhibiting excellent values over 90% suitable for LED/OLED lighting purposes. Brightness was also improved by 13~14% toward the viewing angle direction. Computational simulations using LightTools$^{TM}$ were also carried out and turned out to be in strong agreement with experimental data. Finally, we could check the feasibility of fabricating low-cost, large area, high performance optical films for commercialization.