• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.460-461
• /
• 2007

In this paper, we studied the properties of a cable insulate capacity between surfaces with the variation of the interfacial breakdown. As a function of silicon oil, the variation of pressure and interfacial roughness were investigated. The insulate trouble of a power cable is out of the interfacial parts, which breakdown the insulate breakdown capacity in a power cable. In this study, the analysis of electric field and the phenomenon of interfacial breakdown were improved by increased interfacial pressure, decreased surface roughness, and oil. And It was shown that interfacial breakdown LSR-XLPE insulators is higher that of EPDM-XLPE.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.457-462
• /
• 2002

This paper describe the vibration characteristics of cantilevered beam filled with ERF subjected to variousr electrode charge. The Proposed ER fluids used in the present study consists of starch particles and silicon oil. The ER fluids undergo a phase-change when subjected to an external electric filed. This Paper Presents performance analyses of three types of the cantilevered beam with different electrode gaps and applied electric fields.

• 자원리싸이클링
• /
• 제31권6호
• /
• pp.60-65
• /
• 2022

본 논문에서는 반도체용 실리콘 기판 가공 과정에서 발생한 슬러지 재활용을 위해 탄화 반응에 의한 탄화규소(SiC) 분말 합성 공정을 적용한 결과를 제시하고자 한다. 입수한 슬러지는 실리콘 기판을 탄화규소 연마재를 사용하여 가공하는 과정에서 발생하므로 실리콘과 탄화규소가 혼합된 형태였으며 가공 설비로부터 발생한 철 불순물이 포함되어 있었다. 슬러지는 절삭유가 포함되어 있어 점성이 있는 유체 형태였으며 대기 건조를 통해 분말 형태로 변화된 후 산 세정을 통한 철 성분 제거 및 탄화에 의한 탄화규소 분말 합성 과정을 거치게 된다. 슬러지에 포함된 실리콘과 탄화규소의 비율에 따라 탄화 반응에 필요한 탄소량이 달랐으며 탄화규소의 함량이 커질수록 탄소 부족 현상으로 인해 비화학량론적 탄화물(SiC_x, x<1) 형성이 촉진되어 순수한 탄화규소 합성이 이루어지지 않는 것을 확인하였다. 이러한 비화학량론적 탄화물은 잉여 탄소 추가와 고에너지 밀링에 의한 탄화 반응성 증가를 통해 제거할 수 있었으며 결과적으로 산 세정과 밀링 과정에 의해 슬러지로부터 순수한 탄화규소 분말 합성이 가능함을 확인할 수 있었다.

• Journal of Korean Biological Nursing Science
• /
• 제3권1호
• /
• pp.41-52
• /
• 2001

This study was undertaken to investigate the effects of n-6(corn oil) & n-3(fish oil) fatty acids on infarction size and the cerebral activities of antioxidant enzyme in rat focal brain ischemia model. Weaning Sprague-Dawley rats were fed with either corn oil supplemented diet(COD, 14% corn oil) or fish oil supplemented diet(FOD, 14% menhaden oil) for 6 weeks. The right middle cerebral artery was occluded for 2 hours with a silicon rubber coated nylon surgical thread. After 24 hours of recirculation, the rats were sacrificed and brain sections were photographed using CCD camera after staining with 2, 3, 5-triphenyltetrazolium chloride for 60 minutes in room temperature. The infarcted area was measured and the volume of infarction was calculated. Catalase(CAT), superoxide dismutase(SOD) activities, and fatty acid composition in the brain were also measured. The total and corrected infarction volumes were not significantly different between FOD and COD group. The docosagexaenoic acid(DHA) and DHA content/arachidonic acid(AA) ratio of the cerebral cortex, an index of defense against lipid oxidation, were significantly increased in FOD group compared to those of COD group(p<0.05). In the left cortex(non-infarction side) as well as the right cortex(infarction side) of FOD group, CAT and Cu/Zn SOD activities were higher than those of the COD group(p<0.05). However, CAT and Cu/Zn SOD activities were not significantly different between the left cortex(non-infarction side) and the right cortex(infarction side) of both FOD and COD group. GPx activities were also not significantly different between two groups. Our results demonstrate that the brain infarction size in FOD and COD were not significantly different. However, cerebral lipid composition and antioxidant enzyme activities in FOD and COD group were different. Fish oil, a source of n-3 polyunsaturated fatty acid(PUFA) and corn oil, that of n-6(PUFA) may have a protective effect against oxidative stress induced via different mechanisms.

• 자원리싸이클링
• /
• 제19권4호
• /
• pp.51-57
• /
• 2010

실리콘 웨이퍼공정에서 발생하는 실리콘 슬러지로부터 리싸이클링 공정으로 Si-SiC 혼합물을 분리 회수한 다음 기계적 합성법으로 Si-SiC-CuO-C 복합물을 제조하였으며, 리튬전지 음극물질로서의 가능성을 조사하였다. 실리콘 슬러지의 주요 불순물은 절삭유, 금속불순물 및 SiC를 들 수 있다. 오일세정-자력선별-산세척으로 절삭유와 금속불순물을 제거한 다음 고에너지 밀링법으로 Si-SiC-CuO-C 복합물을 합성하였다. 복합물의 충방전 용량과 사이클 특성을 조사한 결과, 수명에 따른 용량 유지 특성이 향상된 우수한 결과를 얻을 수 있었다. 복합물을 구성하는 SiC와 CuO 관련 물질은 실리콘의 부피팽창으로 인한 기계적 파괴 현상을 억제하는 요소로 작용하는 것으로 추정되며, 반면에 Fe 등과 같은 불순물은 전극의 충방전 용량을 감소시키는 요인으로서 전극물질 합성 전에 10 ppm 이내로 제거되어야 하는 것으로 판단된다.

• Fibers and Polymers
• /
• 제3권1호
• /
• pp.38-42
• /
• 2002

Polypropylene filaments were spun from a mixture of PP chips of two different Melt Flow Index (MFI) (3 MFI and 35 MFI). A significant difference was observed in the melting characteristics of the resultant filaments from either of the individual components as observed from the DSC. The main difference being in the degree of melting achieved at any temperature in the initial stages of the melting range, which was found to be higher in case of the filaments spun from the b]end. These filaments were then thermally bonded using silicon oil bath and heated roller method. Subsequently the bond strength of the filaments was measured on the Instron Tensile Tester using the loop technique. The values of the world strengths obtained from the blend were compared with those made from the individual component. It was found that the bond strength of the bonds obtained from the blended filament at a given temperature was higher than that of the bonds made from the filaments of either of the individual components, which is also suggested by the DSC curves. The difference in the bond strength was found to be as high as 25% in case of the blend with 60:40 composition ratios of the 3 MFI and 35 MFI components respectively.

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.56-65
• /
• 1996

The result of wear test for ceramic materials was assessed by Scf parameter to verify the usefulness of the proposed Scf parameter. Friction and wear tests were carried out with ball on disk type. The materials used in this study were HIPed Alumina $(Al_2O_3)$, Silicon carbide (sic), Silicon nitride $(Si_3N_4)$ and Zirconia $(ZrO_2)$. The tests were carried out at room temperature with self mated couples of ceramic materials under lubricated condition. Turbine oil was used as a lubricant. In this test, increasing the load, specific wear rates and wear coefficients of four kinds of ceramic materials had a tendency to increase. The wear coefficients of ceramic materials were in order of $Al_2O_3, SiC, Si_3N_4, ZrO_2$. Worn surfaces investigated by SEM had residual surface cracks and wear particles caused by brittle fracture. As the fracture toughness of ceramic materials was higher, wear resistance more increased. The roughness of worn surface had correlation with wear rate. The wear rate(W$_{s}$) and Scf parameter showed linear relationship in log-log coordinates and the wear equation was given as $W_s = 5.52 $\times$ Scf^{5.01}$.

• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.1003-1008
• /
• 2002

In this paper, the estimation of lifetime with the various conditions of the interface between toughened epoxy and rubber which are consisting materials of underground power delivery system has been studied. After the measurement of the short time AC interfacial breakdown strength on macro interfaces at room temperature, the breakdown time at several voltages were measured under the constant voltages lower than the short time breakdown voltage. The long time breakdown voltage was calculated by using Inverse Power Law. Two types of interfaces was studied. One was the interface between toughened epoxy and EPDM(Ethylene Prorylene Diene Terpolymer). The other was the interface between toughened epoxy and silicon rubber. Interfacial pressure and roughness of interfaces was determined through the characteristic of short time AC interfacial breakdown strength. Oil condition was no oiled, low viscosity oiled and high viscosity oiled. High viscosity oiled interface between Toughened epoxy and silicon rubber had the best lifetime exponent, 20.69. and the breakdown voltage of this interface after 30 years was evaluated 19.27㎸.

• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.93-99
• /
• 2010

A nano-stereolithography is the direct patterning process with a nanoscale resolution using twophoton absorption induced by a femtosecond laser. However, in the majority of the works, the fabrication of 3D microstructures have been done only onto transparent glass due to the use of an oil immersion objective lens for achieving a high resolution. In this work, the coaxial illumination and the auto-focusing system are proposed for the direct patterning of nano-precision patterns on an opaque substrate such as a silicon wafer and a metal substrate. Through this work, 3D polymer structures and metallic patterns are fabricated on a silicon wafer using the developed process.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.250-254
• /
• 1999

Synthesis of the spinel $LiMn_2O_4$ by emulsion method was investigated. $LiOH.H_2O \;and \;Mn(NO_3)_2.6H_2O$ were used as starting materials to prepare mixed aqueous solution (0.5 mol/$\ell$ for the $LiMn_2O_4$). Kerosene, paraffin oil and span 80 were used for organic phase. The aqueous solutioin and organic phase were mixed in the ratio of 2:1 and emulsified at the speed of 4000 rpm for 5 min. The prepared emulsions were dropped into the petroleum heated at $170^{\circ}C$ to evaporate water in the silicon oil bath, dried at $120^{\circ}C$ in the oven the remove petroleum and calcined at temperature ranges from 600 to $900^{\circ}C$ for 48 hrs. The characteristics of powders were investigated by XRD, SEM, BET and electrochemical properties of synthesized cathode materials were measured with Galvanostatic system. $Li_{1.05}Mn_2O_4$ calcined at $800^{\circ}C$ for 48 hrs showed initial discharge capacity of 125.9mAH/g.