• Journal of Ceramic Processing Research
• /
• v.13 no.spc1
• /
• pp.78-81
• /
• 2012

Colloidal titania nanoparticles were synthesized by a simple sol-gel process. The obtained nanoparticles showed high crystallinity and were of the anatase type. These crystalline colloidal titania nanoparticles were organically modified using methyl- and glycidyl-grafted silanes in order to enhance their stability and solution processability. The stabilized colloidal titania nanoparticles could be dispersed homogeneously without aggregation and converted into silica-titania hybrid films with the heterogeneous Si-O-Ti bonds by a low-temperature solution process. The fabricated silica-titania hybrid films showed high transparency (~ 90%) in the visible range, and low RMS roughness (<1 nm). Therefore, the organosilane-modified crystalline colloidal titania nanoparticles can be used in solution-processable functional coatings for electro-optical devices.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.172-177
• /
• 2003

Biphenyltetracarboximide-phenylene diamine polyimide/silica-titania ternary hybrid composites were Prepared by thermal imidization and sol-gel reaction. Fluorescence spectroscopic, scanning electron microscopy, and atomic force microscopy studies revealed that the addition of small amount of titania showed profound effects on the microstructure and photophysical behaviors of polyimide/silica hybrid composites, when the content of silica-titania mixture was small or when the ratio of silica to titania in the mixture was high.

• Clean Technology
• /
• v.16 no.2
• /
• pp.140-144
• /
• 2010

Titania-silica composite materials were obtained by sol-gel method from TiCl4 and TEOS precusors, and they were applied to anode materials of lithium ion battery. Uniformly distributed composite materials can be manufactured by sol-gel method. The composite materials were heat treated by microwave to obtain materials with new properties. The experimental variables were composition of the material, heat treatment temperature, and microwave exposure. The structure and surface properties of the materials were analyzed by XRD, SEM, and the electrochemical capacity was measured with charge/discharge cycler.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.386-387
• /
• 2003

Titania-silica hybrid inorganic materials are interesting subjects and many researchers have been studying.$\^$1-3)/ In general, the titania-silica hybrid materials are used as film and catalyst. Sol-gel method has widely been used as an alternative technology to prepare a wide variety of applications including monoliths, powders, coatings, and fibers.$\^$4-6)/ The typical sol-gel method is hydrolysis and condensation of tetraethyl orthosilicate (TEOS), Si(OCH$_2$CH$_3$)$_4$. (omitted)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.553-554
• /
• 2007

By sol-gel method, we have fabricated silica-titania hybrid film using silane treated colloidal $TiO_2$ and characterized the film through FT-IR, TGA, UV-VIS and AFM. The silica-titania hybrid film showed Ti-O-Si chemical bond at FT-IR peak of $910{\sim}940cm^{-1}$. The fabricated hybrid film showed thermal stability of around $350^{\circ}C$(5wt% loss temperature) and transparency more than 90%. In addition, the good surface smoothness was confirmed by AFM. Therefore, the silica-titania hybrid film with outstanding properties can be potential for application in electronics and displays.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.183-187
• /
• 2007

$SiO_2/TiO_2$ core-shell particles with controlled shell thickness were prepared using large silica particles. The thickness of titania coating layer was varied from 8 nm to 38 nm depending on the number of coating steps from 1 to 3 times. After titania coating, the core-shell particles showed textured surface due to the titania coating layer, resulting in 3~25 times increase of specific surface areas. The properties of titania coated silica particles were characterized by FE-SEM, Zeta potential meter, BET, and XRD.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1803-1805
• /
• 1999

The thermal expansion coefficient of the titania-fused silica glass$(TiO_2-SiO_2)$ called KLR-1.1 is known to $0{\pm}0.03$ ppm/K, while that of normal fused-silica glasses is about +0.5 ppm/K at room temperature. To analysis the dielectric properties of the KLR-1.1, the sample with diameter of 30 mm and thinkness of 1 mm is covered with gold film. Its relative permittivity and dissipation factor of KLR-1.1 is evaluated to $4.011{\pm}0.012(1\sigma)$ and $(4.86{\pm}0.02){\times}10^{-4}(1{\sigma})$ at 1 kHz respectively. The measurement techniques used and results are more discussed in this paper.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.185-197
• /
• 2019

Deactivation of porous photocatalytic materials was studied using three types of microstructured particles: macroporous titania particles, titania microspheres, and porous silica microspheres containing CNTs and $TiO_2$ nanoparticles. All particles were synthesized by emulsion-assisted self-assembly using micron-sized droplets as micro-reactors. During repeated cycles of the photocatalytic decomposition reaction, the non-dimensionalized initial rate constants (a) were estimated as a function of UV irradiation time (t) from experimental kinetics data, and the results were plotted for a regression according to the exponentially decaying equation, $a=a_0\;{\exp}(-k_dt)$. The retardation constant ($k_d$) was then compared for macroporous titania microparticles with different pore diameters to examine the effect of pore size on photocatalytic deactivation. Nonporous or larger macropores resulted in smaller values of the deactivation constant, indicating that the adsorption of organic materials during the photocatalytic decomposition reaction hinders the generation of active radicals from the titania surface. A similar approach was adopted to evaluate the activation constant of porous silica particles containing CNT and $TiO_2$ nanoparticles to compare the deactivation during recycling of the photocatalyst. As the amount of CNTs increased, the deactivation constant decreased, indicating that the conductive CNTs enhanced the generation of active radicals in the aqueous medium during photocatalytic oxidation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.211-211
• /
• 2011

Nanostructures, with a diversity of shapes, built on substrates have been developed within many research areas. Lithography is one powerful, but complex, technique to make structures at the nanometer scale, such as platinum nanowires for studying CO catalytic reactions [1], or aluminum nanodisks for studying the plasmon effect [2]. In this work, we approach a facile method to construct nanostructures using noble metals on a titania thin film by using self-assembled structures as a pattern. Here, a large-scale silica monolayer is transferred to the titania thin film substrates using a Langmuir-Blodgett trough, followed by the deposition of a thin transition metal layer. Owing to the hexagonal close-packed structure of the silica monolayer, we would obtain a metal nanostructure that includes separated metallic triangles (islands) after removing the patterning silica beads. This nanostructure can be employed to investigate the role of metal-oxide interfaces in CO catalytic reactions by changing the patterning silica particles with different sizes or by replacing the oxide support. The morphology and chemical composition of the structure can be characterized by scanning electron microscopy, atomic force microscopy and X-ray photoelectron spectroscopy. In addition, we modify these islands to a connected island structure by reducing the silica size of the patterning monolayer, which is utilized to generating hot electron flow based on the localized surface plasmon resonance effect of the metal nanostructures.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.204-204
• /
• 2006

The interfacial interaction along with microstructure and some properties of the polyimide(PI)/silica or polyimide/silsesquioxane hybrid nanocomposites will be discussed with reviewing recent publications including our own works. Poly(vinyl silsesquioxane) (PVSSQ), aminosilane (APS), and titania can effectively play vital roles to compatibilize the PI/silica hybrid composites by enhancing interfacial interaction or reducing agglomeration of large domains, which helps the formation of nanocomposites for the PI/silica hybrid system.