• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.49-53
• /
• 1977

In order to know the effect of lime application on the phosphorus and silicate, lime and phosphorus were applied in the soil where phosphorus concentration was low and pH 5.4 The results are as follows 1. The filled grain ratio increases by applying the lime in moderate quantity, conversely the large amount of lime reduced the number of panicles per hill and number of spikelets per panicle. 2. The phosphorus application increased the panicle number, grain number and filled grain ratio. Similarly the yield was also significantly increased. 3. Among the inorganic matter of plant absorbed at the heading time the nitrogen contents was highly correlated with the number of heads, grain number per head and yield, while contents of $P_2O_5$ and $SiO_2$ were significantly correlated with the grain number maturerate and yield respectively. 4. Under the lime application the silica of soil was partly correlated with yield and yield components. But there was a significant difference between contents of $P_2O_5$ in soil and yield componentas. And in the plot of double application of neutralizing lime, significance of 1% level was shown between the $P_2O_5$ in soil and the panicles number and grain number respectively, where as significance of 5% with yield. 5. The phosphorus concentration in soil was gradually increased by the increment of lime application. Also the rate of available silicate in soil was considerably increased by the increment of lime application. That is, the silicated concentration in soil was 86ppm with lime and 59ppm without lime.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.95-95
• /
• 2001

The Yeongdong basin is one of the pull-apart basins in the southwestern part of the Korean Peninsula that has developed during Cretaceous sinistal fault movement. The bimodal igneous activities (basalts and rhyolites) in the basin appear to be closely associated with the basin development. Here, we discuss the origin of the igneous rocks using chemical and radiogenic isotope data. Basaltic (48.4-52.7 wt% SiO$_2$) and rhyolitic (70.3-70.8 wt% SiO$_2$) rocks are slightly alkalic in a total alkali-silica diagram. The rhyolitic rocks with have unusually high K$_2$O contents (5.2-6.0 wt%). The basaltic rocks show an overall pattern of within-plate basalt in a MORB-normalized spider diagram, but have distinct negative anomaly of Nb, which indicates a significant amount of crustal component in the magma. The basaltic rocks plot within the calc-alkaline basalt field in the Hf/3-Th-Ta and Y/l5-La/10-Nb/8 discrimination diagrams. The eNd(T) values of the basaltic rocks (-13.6 to 14.3) are slightly higher than those of the rhyolitic rocks (-14.1 to 15.2), and the initial Sr isotopic ratios of the former (0.7085-0.7093) are much lower than those of the latter (0.7140-0.7149). However, the initial Nd and Sr isotope ratios of the igneous rocks in the Yeongdong basin are similar to those of the nearby Cretaceous igneous rocks in the Okcheon belt. The Pb isotope ratios plot within the field of Mesozoic granitoids outside of the Gyeongsang basin in Pb-Pb correlation diagrams. Since a basaltic magma requires the mantle source, the enriched isotopic signatures and negative Nb anomaly of the basaltic rocks suggest two possibilities for their origin: enriched mantle lithospheric source, or depleted mantle source with significant amount of crustal contamination. However, we prefer the first possibility since it would be difficult for a basaltic magma to maintain its bulk composition when it is significantly contaminated with granitic crustal material. The slightly more enriched isotopic signatures of rhyolitic rocks also suggest two possibilities: differentiate of the basaltlc magma with some crustal contamination, or direct partial melting of the lower crust. Much larger exposed volume of the rhyolitic rocks, compared with the basaltic rocks, indicates the latter possibility more favorable.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1972

In order to expect the effect of silica with large quantity application of current Fused calcium-magnesium phosphate on the paddy rice, there are difficulties of excess phosphorus application because of the high content of phosphate in this fertilizer. This experiment was discussed on the effect of posphate and silica absorbed by rice plant from the low concentrated fused calcium-magnesium phosphate which was fused with mixture of rock phosphate, chemical calcium oxide, magnesium oxide and silicate oxide in the furnace using coke, 1. The fusion material contained 8.9% of citric acid soluble $P_2O_5$ and 33% of soluble $SiO_2$. 2. The rice yields were increased with high significance accompanying the application levels of fused material amounts. 3. No. of grains per head, weight of 1,000 grains and percent of filled grain were caused to increase the productivity of rice plant on account of the high content of silica in straws absorbed from fusion material. The treatment of 300 kg/10a. was the highest yield among the levels of fusion material. 4. At the growing periods of rice plant, amount of absorbed phosphate was higher in the small amount treatment of fusion material until the formation period of young head, and was highest in the treatment of 300 kg/10a. leval among them but slightly desreased at 500 kg/10a. level at the harvest. Amount of absorbed silica was the same trend with phosphorus at the begining of growth period but increased rapidly from the formation period of young head to harvest in the large quantity application levels. 5. Much amount of nutrients were residued in the soil after experiment pacing with application levels. 6. The effect of silica and phosphate on rice plant can be expected with fusion material but it is necessary to decrease the phosphate content on account of the large residue of phosphate in the soil after experiment.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1213-1218
• /
• 2004

The present article reports extensive numerical results on the non-local characteristics of ultra-short pulsed laser-induced breakdowns of fused silica ($SiO_{2}$) by using the multivariate Fokker-Planck equation. The nonlocal type of multivariate Fokker-Planck equation is modeled on the basis of the Boltzmann transport formalism to describe the ultra-short pulsed laser-induced damage phenomena in the energy-position space, together with avalanche ionization, three-body recombination, and multiphoton ionization. Effects of electron avalanche, recombination, and multiphoton ionization on the electronic transport are examined. From the results, it is observed that the recombination becomes prominent and contributes to reduce substantially the rate of increase in electron number density when the electron density exceeds a certain threshold. With very intense laser irradiation, a strong absorption of laser energy takes place and an initially transparent solid is converted to a metallic state, well known as laser-induced breakdown. It is also found that full ionization is provided at intensities above threshold, all further laser energy is deposited within a thin skin depth.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2425-2433
• /
• 2018

This study investigates a new organic based material and its dielectric and mechanical properties. It is a comprehensive nanocomposite comprising a combination of various types of nanofillers with hydrophobic silica nanoparticles (AEROSIL R 974) as a matrix modifier and a polyamide nano nonwoven textile, Ultramid-Polyamide 6, pulped in the electrostatic field as a dielectric barrier. The polymer matrix is an epoxy network based on diglycidyl ether of bisphenol A (DGEBA) and cycloaliphatic diamine (Laromine C260). The designed nanocomposite material is an alternative to the conventional three-component composites containing fiberglass and mica with properties that exceed current electroinsulating systems (volume resistivity on the order of $10^{16}{\Omega}{\cdot}m$, dissipation factor tan ${\delta}=4.7{\cdot}10^{-3}$, dielectric strength 39 kV/mm).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.75-79
• /
• 1993

The Thermally Stimulated Current(TSC) method has been allied to study the influence of the structural change and interface on the electrical properties of epoxy composites. Three DGBA- MeTHPA matrix model samples mixed different ratios arts silica(SiO$_2$) filled sample and silaln treating-filled sample have been studied. Above room temperature, the relaxation mode ${\alpha}$ peak associated with T$\_$g/ has been located at 110$^{\circ}C$. Below glass transition temperature(T$\_$g/), three relaxation modes are observed in all samples : a ${\beta}$ mode situated at 10$^{\circ}C$, a ${\gamma}$ mode located at -40$^{\circ}C$ and a $\delta$mode appeared in -120$^{\circ}C$, which may be due to segmental motion, side chains, substitution and terminal groups. The analysis of its fine structure indicates that constitution of elementary processes is characterized by the activation energy and relaxation time. Also the change of the molecular structure and their thermal motion are compared with the relaxation mode and conduction mechanism in TSC spectra through the dielectric properties and FTIR measurements.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.120-124
• /
• 2004

본 연구는 Diluted Ceria 입자를 사용한 $SiO_2$(Oxide) CMP 현상에 대한 내용이다. Ceria Slurry의 경우 Silica Slurry와 비교하였을 때 Oxide Wafer 표면과 축합 화학반응을 일으키며 Chemistry Dominant한 CMP Mechanism을 따르고, Wafer Center Removal Rate(RR) Fast 의 특성을 가진다. Ceria Slurry의 문제점인 연마 불균일도를 해결하기 위해 Tribological System을 이용하였다. CMP Tribology는 Pad-Slurry 유막-Wafer의 System을 가지며 윤활막에 작용하는 마찰계수(COF)가 주요 인자이다. Tribology에 적용되는 Stribeck Curve를 통해 Slurry 윤활막의 두께(h) 정도를 예상할 수 있으며, 이 윤활막의 두께를 조절함으로써 Uniformity 향상이 가능하다. 이 Ceria Slurry CMP의 연마 불균일도를 향상시킬 수 있는 방법으로 pH 조절 및 점도 증가가 있다. Ceria 입자 CMP는 분산액의 pH 변화에 강한 작용을 받게 되며 PH5 근방에서 최적화된 Uniformity가 가능하다. 점도를 증가시키는 경우 유막 h가 증가하게 되어 Ceria Slurry의 유동이 균일 분포 상태에 가까워지며 Wafer Uniformity 향상이 가능하다.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.901-906
• /
• 1997

Ultrafine silicon dioxide($SiO_2$) powder was prepared from tetraethylorthosilicate(TEOS) by the gas-phase reaction. The effects of reaction temperature, flow rate of gas, TEOS concentration, and preheating temperature of reactants on the particle size were investigated. As the reaction temperature increased, average particle size of the silicone dioxide powder became smaller. Smaller particles were also obtained with decreasing the residence time of reactants in the reaction zone. Larger particles having narrow size distribution were produced with the high concentrations of the reactants. The effect of the preheating temperature was not considerable on the average particle size. The range of average particle size was from 30 nm to 58 nm depending on experimental conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.12
• /
• pp.668-673
• /
• 2013

In this study, specimens with nano-sized porous thin films were manufactured by injecting fluorescence solution into the pores. We intended to find out the difference of the fluorescence intensity in each region of the specimen through an experimental apparatus that makes a temperature field. Before conducting experiments, the optimized manufacturing conditions were determined by analysis of all parameters that influence the emission intensity, and the experiments were carried out with the specimens produced in the optimized conditions. Then, the calibration curves of the fluorescence intensity versus temperature were performed by taking the intensity distributions from the specimen in various temperature fields. The surfaces of specimens were coated with Rhodamine-B (Rh-B) fluorescent dye and measured based on the fluorescence intensity. Silica (SiO2) nanoporous structure with 1-um thickness was constructed on a cover glass, and fluorescence dye was absorbed into these porous thin films.

• Journal of the Korean earth science society
• /
• v.29 no.7
• /
• pp.531-538
• /
• 2008

The mode of occurrence of petrified woods from the Tertiary strata of Pohang Basin in Kyeongsangbug-do suggests that the petrified woods are all allochthonous fossils. Petrified woods as well as various types of wood fossils such as carbonized woods and charcoal woods were found. However, some lignified organic remains are rarely found in the bark part of petrified woods. X-ray diffraction analysis showed three types of minerals including Opal-CT, Opal-C, and quartz+cristobalite. The presence of these minerals indicates that silicification occurred under the low temperature. The tuffs are considered to be main source of supply of silica. Analysis of the kind of composing minerals and the condition of tissue preservation can predict that silicification is mainly occurred by replacement.