• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.240-246
• /
• 2000

An in-process estimation of the ground surface roughness is a bottle-neck and an essential field in conventional grinding operation. We defined the dimensionless average roughness factor (D.A.R.F) that exhibits a roughness characteristics of ground surface. The D.A.R.F was composed easily of the absolute average and the standard deviation values which were the analytic parameters of the acoustic emission (AE) signal generated during the machining process. The theoretical equation between the surface roughness and the D.A.R.F has been derived from the linear regressive analysis and verified its availability through the experimentation on the surface grinding machine.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.147-153
• /
• 1999

An in-process extraction method of the ground surface roughness is a bottle-neck and essential field in conventional machining process. We define the D.A.R.F(Dimensionless Average Roughness Factor) that has a roughness characteristic of ground surface. D.A.R.F include the absolute average and the standard deviation values which are the analytic parameters of the AE(Acoustic Emission) signal generated during the grinding operation. The theoretical equation between the surface roughness and the D.A.R.F has been derived from the linear regressive analysis and verified its availability through the experimentation on the surface grinding machine.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.277-278
• /
• 2007

본 논문에서는 Film의 물리적인 특성을 Modeling하여 Film신호가 아닌 영상신호를 Film신호 특성을 갖도록 함으로써, Color가 보다 풍부한 느낌이 들게 하고 어두운 부분과 밝은 부분의 Dynamic Range를 확대하여, 일반 Video신호 영상을 필름 영화와 같은 Color효과를 갖도록 변환하는 방법에 대해 제안한다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1659-1661
• /
• 2003

Recently, diagnostic techniques have been investigated to defect a partial discharge in high voltage electrical equipment. We have studied the characteristics of the acoustic partial discharge originating from the electrical defects in cubicle GIS(C-GIS). An acoustic emission(AE) sensor is used on the enclosure to detect partial discharge source because the sensor is sensitive to stress waves in its frequency range that may not be from a partial discharge source. AE signal is analyzed with phase-magnitude-frequency number(${\Phi}$-V-n) and pulse per second(PPS). Experience result has shown that the omitted acoustic signal has phase dependency and phase shift characteristic according to increase with applied voltage. These result will be helpful to the pattern recognition of the acoustic partial discharge in a C-GIS.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.272-273
• /
• 2005

전력선 통신을 위한 커플러용 자심재료의 열처리 온도증가에 따라 결정이 성장하여 인덕턴스는 증가 하였고, $550^{\circ}C$ 이상에서는 포화점을 나타내었다. 커플러는 자심재료의 투자율이 높을수록 커플러의 저주파 대역의 신호전승 특성이 우수하게 나타났지만, 주파수 증가에 따라 급격히 저하하는 불안정한 특성을 나타내었다. 그리고 절단면 사이의 Air gap 증가에 따라 10 MHz이하의 주파수 대역에서 신호전승특성이 급격히 감소하였고, 허용전류는 직선적으로 증가하였으며 Air gap이 $600{\mu}m$이상일 때 300A의 전류에서 특성을 발휘하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.178-178
• /
• 2018

차량용 강우센서는 강우에 따라 와이퍼의 동작 속도를 제어하기 위해 만들어졌다. 따라서 강수의 크고 적음을 대략적으로 판단하여 와이퍼의 속도단계를 결정하기 위한 장치이다. 차량용 강우 센서는 동작원리는 송수신되는 광신호에 기반한다. 일반적인 강우관측기와 달리 물 입자가 커질수록 빛의 산란이 크게 일어나는 현상을 이용한다. 산란이 크게 일어나면 강우 센서에 수광부의 광신호 값이 줄고 이는 강수가 높다는 것을 의미한다. 따라서 센서의 감지신호(Signal)와 실제강우(R)과의 관계를 이용하여 강우량으로 환산할 수 있는 R-S관계식을 개발하였다. 센서의 감지 신호(Signal)를 강우량으로 환산하기 위하여 실내 강우발생 실험 장치를 이용하여 일정 강우(R)를 증가시키고 그때 발생된 센서 감지량(S)의 관계를 수치적으로 분석하여 상관식을 만들었으며 실제 AWS, 자기우량계와 비교 분석하였다.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.576-583
• /
• 2008

In this study, we attempt to design a real-time autonomic nervous system(ANS) evaluation system usable during exercise using heart instantaneous frequency(HIF). Although heart rate variability(HRV) is considered to be a representative signal widely used ANS evaluation system, the R-peak detection process must be included to obtain an HRV signal, which involves a high sampling frequency and interpolation process. In particular, it cannot accurately evaluate the ANS using HRV signals during exercise because it is difficult to detect the R-peak of electrocardiogram(ECG) signals with exposure to many noises during exercise. Therefore, in this study, we develop the ground for a system that can analyze an ANS in real-time by using the HIF signal circumventing the problem of the HRV signal during exercise. First, we compare the HRV and HIF signals in order to prove that the HIF signal is more efficient for ANS analysis than HRV signals during exercise. Further, we performed real-time ANS analysis using HIF and confirmed that the exerciser's ANS variation experiences massive surges at points of acceleration and deceleration of the treadmill(similar to HRV).

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.446-451
• /
• 2001

We made a laser induced grating spectrometer(LIGS) and measured the thermal grating signal generated in a $C_3$ $H_{8}$ flame. The thermal grating was formed in the C7Ha flame with two second-harmonic Nd:YAG pulse laser beams, and an LIGS signal was generated by Bragg scattering of a probe laser beam A $r^+.laser(488 nm). We found the modulation period of the signal depends linearly on the spacing of the grating set in the flame. We determined flame temperature by fitting the modulated signal and soot concentration with signal strength. Using this technique, we also obtained temperature profile and soot-particle distribution in a $C_3$ $H_{8}$ flame .e .

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.6
• /
• pp.554-564
• /
• 2020

In environment of torpedo firing, underwater acoustic signal is generated by target and noise. Sound wave which is generated from acoustic signal is propagated by seawater and it is received through the sonar(sound navigation and ranging) system mounted on torpedo. In the ocean, acoustic signal or sound wave from target that is generated by the spread of broadband can be attenuated by ambient noise and can be lost by medium and environment. This research is designed to support teamwork training in Naval operations by constructing a simulation system that is more similar to the real-world conditions. This paper attempts to research the modeling of target detection and to develop the simulation of torpedo sonar(TOSO). In order to develop the realistic simulation, we researched the broadband sound modeling of target and noise source, the modeling of acoustic transmission loss by chemical component of seawater, and the modeling of signal attenuation by ambient noise environment which is approximated by experimental measurements in seawater surrounding the Korea Peninsular and by experience of Navy's actual torpedo firing. This research contributed to constructing more practical simulation of torpedo firing in real time and the results of this research were used to develop a teamwork training system for the Navy and their education.