• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.763-769
• /
• 2007

A narrow loop noise bandwidth method is desirable to reduce the error of raw measurements due to the thermal noise. However, it degrades the performance of GPS initial synchronization such as mean acquisition time. And it restricts the loop noise bandwidth to a fixed value determined by the lower bound of the allowable range of carrier-to-noise power ratio, so that it is difficult to optimally track GPS signal. In order to make up for the weak points of the fixed-type narrow loop noise bandwidth method and simultaneously minimize the error of code and carrier measurements, this paper proposes a stepwise-type adaptive bandwidth algorithm for DGPS reference receivers. In this paper, it is shown that the proposed adaptive bandwidth algorithm can provide more accurate measurements than those of the fixed-type narrow loop noise bandwidth method, in view of analyzing the simulation results between two signal tracking algorithms. This paper also carries out sensitivity analysis of the proposed adaptive bandwidth algorithm due to the estimation uncertainty of carrier-to-noise power ratio. Finally the analysis results are verified by the experiment using GPS simulator.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.909-915
• /
• 2008

Researches for time delay estimation had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Siverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time.

• Journal of Satellite, Information and Communications
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2012

In this paper, we evaluate and analyze representative estimation methods for the sparse channel. In order to evaluate error performance of matching pursuit(MP) and minimum mean square error(MMSE) algorithm, lower bound of MMSE is determined by Cramer-Rao bound and compared with upper bound of MP. Based on analysis of those bounds, mean square error of MP which is effective in the estimation of sparse channel can be larger than that of MMSE according to the number of estimated tap and signal-to-noise ratio. Simulation results show that the performances of both algorithm are reversed on the sparse channel with Rayleigh fading according to signal-to-noise ratio.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.173-175
• /
• 2014

In this paper, we compare a bit error rate performance with channel estimation for terrestrial cloud transmission systems in order to provide an advanced research. Since terrestrial cloud transmission systems experience co-channel interference from one or more transmitters, they have to operate under negative signal-to-noise ratio.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.55-59
• /
• 2006

In cellular OFDMA(Orthogonal Frequency Division Multiple Access) systems, each subcarrier may suffer from different amount of interferences from neighbor cells. Suppose that it is possible to accurately estimate inter-cell interferences for each subcarrier, the performance can be considerably improved by applying SINR(Signal to Interference and Noise Ratio) weighting. This paper proposes an inter-cell interference estimation method for cellular OFDMA systems. The proposed method extracts amounts of noise and interferencesby eliminating the channel variation effects of pilot symbols caused by frequency offset, timing offset mobile velocity, and delay spread.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.248-256
• /
• 2015

In this paper, we model the interference plus noise signal for terrestrial cloud transmission systems and present bit error rate (BER) performances. Since terrestrial cloud transmission systems experience co-channel interference from one or more transmitters, they have to operate under a negative signal-to-interference plus noise ratio (SINR) region. The interference plus noise signal can be modeled as Gaussian random variable under the required SINR region and we observe the BER performance of the cloud transmission system using the derived model. Also, we propose an improved channel estimation scheme by averaging the channel estimates based on least square based interpolation scheme. Simulation results show that the cloud transmission system can operate under negative SINR region using the proposed channel estimation scheme.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1287-1296
• /
• 2009

It is very important to estimate the Signal to Noise Ratio(SNR) of received signal in time varying channel state. Most SNR estimation techniques derive the SNR estimates solely from the samples of the received signal after the matched filter. In the severe distorted wireless channel, the performance of these estimators become unstable and degraded. LP-based SNR estimator which can operate on data samples collected at the front-end of a receiver shows more stable performance than other SNR estimator. In this paper, we study an efficient SNR estimation algorithm based on LP and propose a new estimation method to decrease the computation complexity. Proposed algorithm accomplishes the SNR estimation process efficiently because it uses the forward prediction error and its conjugate value during the linear prediction error update. Via the computer simulation, the performance of this proposed estimation method is compared and discussed with other conventional SNR estimators in digital communication channels.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.457-467
• /
• 2018

This paper presents performance comparison of several high-resolution frequency estimation algorithms for pure real tone signal. Algorithms are DFT (Discrete Fourier Transform - for reference purpose), Jacobsen, Candan, reassignment and Cedron. Each algorithm is evaluated under various experimental conditions, e.g., different SNR (Signal to Noise Ratio), window function and window length and performance is compared in the perspective of bias, MSE (Mean Square-Error) and variance. Experimental results indicate that Cedron algorithms works well in the most cases. For actual usage in the engineering problem, each algorithm needs additional analysis and modification.