• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2170-2187
• /
• 2023

The general interference is the imperative trouble for simultaneous wireless information and power transfer (SWIPT) system. Although interference has bad influences on the performance of the system, it carries energy simultaneously. In this paper, the energy-constrained relay of the SWIPT system needs to spend much time on energy collecting (EC) in the information transmission (IT) period. Therefore, we propose the scheme of interference signal energy collecting (ISEC) when the interference is strong, and the SWIPT system does not carry out IT. The relay of the system continues to collect energy and stores it until the interference has minimal impact on IT. Then the system performs IT. We divide the collected interference energy equally into several parts, and each IT block receives one part. The proposed scheme is appealing because it can reduce the time of EC in IT period to make the relay spends more time forwarding the received signal in order to improve the performance of the system throughput. Furthermore, we propose a time-switching (TS) protocol based on EC at the relay. And it allows the relay forwarding signal at an appropriate power. Under the protocol, the time of EC can be flexible according to the forwarding power that we give so that the collected energy can be used more efficiently. We give the expressions of the system throughput according to the proposed scheme and protocol. Moreover, the influence of the interference power on the system throughput is also studied.

• 한국통신학회논문지
• /
• 제37권4A호
• /
• pp.269-277
• /
• 2012

원하는 신호의 어레이 응답벡터와 조향벡터사이에 불일치가 있다면 적응 어레이는 원하는 신호와 간섭신호를 동시에 감쇠하기 때문에 심한 성능저하를 가져올 수 있다. 본 논문에서는 조향벡터에 도래각 에러뿐만 아니라 랜덤에러가 있을 때 이에 대처하는 강인한 적응 어레이 기법을 제시한다. 제시된 기법에서는 상관행렬로부터 SIS(signal-plus-interference subspace) 부공간을 구한 후, ULA(uniform linear array) 구조를 이용하여 원하는 신호의 방향벡터 영향을 가능한 줄이면서 간섭 부공간을 추출하고 이에 직교하도록 가중벡터를 구하여 조향벡터 에러에 대한 강인성을 얻는다. 제안된 방식은 DCRCB(doubly constrained robust Capon beamformer) 등 기존방식보다 우수한 SINR(signal-to-interference plus noise ratio) 성능을 가짐을 시뮬레이션 결과는 보여준다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.424-442
• /
• 2014

Most recent research on iterative solutions for interference alignment (IA) presents solutions assuming channel reciprocity based on the suppression of interference from undesired sources by using an appropriate decoding matrix also known as a receiver combining matrix for multiple input multiple output (MIMO) interference channel networks and reciprocal networks. In this paper, we present an alternative solution for IA by designing precoding and decoding matrices based on the concept of signal leakage (the measure of signal power that leaks to unintended users) on each transmit side. We propose an iterative algorithm for an IA solution based on maximization of the signal-to-leakage-and-noise ratio (SLNR) of the transmitted signal from each transmitter. In order to make an algorithm removing the requirement of channel reciprocity, we deploy maximization of the signal-to-interference-and-noise ratio (SINR) in the design of the decoding matrices. We show through simulation that minimizing the leakage in each transmission can help achieve enhanced performance in terms of aggregate sum capacity in the system.

• 대한전자공학회논문지
• /
• 제15권6호
• /
• pp.29-34
• /
• 1978

아나로그 무선통신계와 디지탈 무선통신계가 각기 동일 무선주파수대의 인접주파수를 사용함에 의한 시스템간 간섭이 존재하는 상태하에서 이들 양 무선통신계가 혼재하기 위해 필요한 최적조건을 구하고자 그의 제일단계로서 아나로그계가 디지탈계에 미치는 시스템간 간섭에 대해 이론적 해석을 행했다. 이에는 특히 이제까지 불분명했던 PSK 신호에 미치는 FM 신호의 간섭영향에 대해서 논했다. 본 연구에서 얻어진 결과는 시스템간 간섭의 존재하에 있어서의 PSK 시스템에 대한 각파수할당 및 대역폭, 전력 등을 정함에 있어 유효한 자료를 제공한다.

• 한국통신학회논문지
• /
• 제18권12호
• /
• pp.1994-2000
• /
• 1993

이 논문에서는 DS 스펙트럼 확산방식에서 협대역 간섭신호를 추정하고 제거하여 DS자체가 가지는 간섭억압능력의 성능을 개선할 수 있도록 새로운 필터구조를 제안하였고 제안한 필터구조가 가지는 간섭제거성능을 거친 신호를 사용하여 만들어지므로 수신신소에서 때주어 필터에 가한 경우 간섭제거 필터에 의해 얻고자하는 신호의 왜곡을 줄일 수 있다. 그리고 필터의 계수를 보정하는 과정에 사용되는 오차신호에는 아직 덜 제거되고 남은 간섭신호의 상관성이 존재할 수 있으므로 이 오차신호에 선형예측기를 적용하여 간섭신호의 상관량이 제거된 오차신호를 탭계수 보정에 사용하므로써 적응필터의 성능을 향상시킬 수 있다. 시뮬레이션 과정에서는 처리이득(췹수)을 7과 15 두가지 경우로 하고 간섭제거 필터의 탭계수의 수는 16, 전송대역의 5%를 간섭대역으로 하고 신호대 간섭비를 -10dB로 하여 시행한 결과, 간섭억압능력과 BER성능면에서 약 1~3dB의 SNR 향상을 얻을 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.727-730
• /
• 2002

This paper proposes the interference cancellation improvement in smart antenna system by using Applebaum array covariance matrix adjustment. This technique adds the specific adjustable multipliers with both desired signal covariance matrix and interference signal covariance matrices in order to overcome some disadvantages and improve the interference cancellation efficiency of Applebaum array. It is based on the desired and undesired signal power or desired signal-to-interference-plus-thermal noise ratio (SINR). As the result from demonstration, the proposed technique can improve and increase the interference cancellation efficiency in smart antenna better than the conventional technique.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2011년도 하계학술대회
• /
• pp.137-140
• /
• 2011

A precoding strategy is one of the representative interference management techniques in cognitive radio (CR) network which is a typical interference-limited environment. The interference minimization approach to precoding is an appropriate scheme to mitigate the interference efficiently while it may cause the capacity loss of the desired channel. The precoding scheme for the maximal capacity of the desired channel improves the capacity of the desired channel while it increases the interference power and finally causes the capacity loss of the interfered users. Therefore, we propose a precoding scheme which satisfies these two conflicting goals and manages the interference signal in such an interference-limited environment. The proposed scheme consists of two steps. First, the precoder nulls out the largest singular value of the interference channel to mitigate the dominant interference signal based on the interference minimization approach. Second, the transmitter calculates the sum capacities per mode and selects a mode to maximize the sum capacity. In the second step, each mode consists of the right singular vectors corresponding to the singular values except the largest singular value eliminated in the first step. Simulation results show that the proposed precoding scheme not only efficiently mitigate the interference signal, but also has the best performance in terms of the sum capacity in a MIMO-based CR network.

• 전자공학회논문지 IE
• /
• 제45권1호
• /
• pp.38-43
• /
• 2008

본 논문은 RF 중계기에서 발생되는 궤환 신호로 인한 발진현상을 제거하는 간섭제거 방법을 제시한다. 본 논문에서는 LMS(Least Mean Square) 알고리즘을 이용하여 궤환 신호를 추정하고, 그에 상응하는 감쇄신호를 만들어 간섭을 제거하도록 하였다. 본 제안 방법을 이용하여 도플러(Doppler) 주파수를 변화시키면서 성능시험을 수행한 결과 궤환 신호를 상쇄시키는 -30dB의 감쇄신호를 발생시켜 발진을 방지할 수 있었다.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.126-130
• /
• 1998

In this paper, a new interference rejection filter using the data-recycling technique is presented. The reference signal of the interference rejection filter is formed by using chip decisions, which is correlated with the narrowband interference components of the received signal. The decision feedback techniques reduce the distortion of the desired signal, which is introduced by the interference rejection filter through he use of feedback chip decisions. In order to update the filter coefficients a simple and efficient data-recycling technique that has improved performance over the conventional LMS algorithm is used. The performance of the proposed interference rejection filter is compared to filter with conventional LMS linear filter. The results show that the convergence speed of the proposed interference rejection filter using decision feedback and data-recycling technique is significantly faster than that of the conventional filters. Also, BER performance of the interference rejection filter demonstrates the superiority of the proposed filter algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.75-77
• /
• 2005

When measuring impedance of electronic component and so on, even the small size can reject the interference to shielding object. But, the interference through human body is grown when measuring bioimpedance without establishing shield specially. Consequently, when measuring bioimpedance in this paper, it proposed impedance measurement method to take advantage of spread spectrum technology, so that can reject the interference without establishing shield specially. Spread spectrum impedance measurement method to propose in this paper can reject the interference signal that occurring from medical instruments in the human body, the interference signal that is flowed in from surrounding environment when measuring impedance. It improved SJR(signal to jamming ratio) about 22dB than conventional method that actually realize and experiment spread spectrum impedance measurement method.