• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.17-24
• /
• 2009

This paper deals with the cancellation performance of loop back interference signal in the case of multihop relay of 16-QAM received signal at the USN radio network. For this, it is necessary to the exchange of information with long distance located station by means of the relay function between the node in the USN environment. In the relay node, the loop-back interference signal which the retransmitting signal is feedback to the receiver side due to the antenna of transmitter and receiver are co-used or very colsely located or using the nonlinear device. Due to this signal, the performance of USN system are degraded which are using the limited resource of frequency and power. For improve this, it is necessary to applying the adaptive signal processing algorithm in order to cancellating the unwanted loop-back interference signal at the frontend of receiver in relaying node, we can get the better system and multi hop performance. In the adaptive signal processing, we considered the 16-QAM signal which has a good spectral efficiency, firstly, than, the QR-Array RLS algorithm was used that has a fairly good convergence property and the solving the finite length problem in the H/W implementation. Finaly, we confirmed that the good elimination performanc was confirmed by computer simulation in the learing cuved and received signal constellation compared to the conventional RLS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.43-52
• /
• 2012

This paper presents and analyzes laboratory test results of Interference Cancellation Digital On Channel Regenerative Repeater(IC-DOCR) to broadcast digital television signals in the Advanced Television Systems Committee(ATSC) transmission systems using single frequency networks(SFN). IC-DOCR laboratory test is classified to receiver test, transmitter test, and feedback interference cancellation test. The receiver part includes random noise, single echo, multi-path ensembles, and adjacent channel interference test. The transmitter part includes out-of channel emission, equality of transmitting signal, and phase noise test. By the laboratory test, the receiver part of the IC-DOCR eliminates 28dB of feedback signal higher than the received signal and has 17.8dB at TOV(Threshold Of Visibility) under random noise environment. Also, the transmitter part satisfies the specification of US FCC(Federal Communications Commission) as well as maintains good output signal quality for guaranteeing more than SNR 30dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8A
• /
• pp.730-740
• /
• 2011

The Korean radio broadcasting system is analog. Compared with digital radio, the analog radio decreases the frequency efficiency. HD Radio is the method where the digital signal is transmitted on either side of the analog PM signal. Therefore, without relocating the analog frequency can transmit digital signals. If interference between analog and digital signal occurs it is impossible to receive smoothly, so HD Radio interference with existing analog PM will be analyzed. In this paper, based on Mt.Gwae-Bang stations within +-400kHz frequency of l03.5MHz, and to use the station to station by specifying the HD Radio channel interference, place the structures were analyzed. Through this paper, the reader of a digital radio frequency interference in the system know that it may obtain information about.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1213-1221
• /
• 2022

In Electronic Warfare, the need to develop a jamming system that protects our location information from enemy radar is constantly increasing. The jamming system normally uses wide-band DRFM(Digital Radio Frequency Memory) that processes the entire bandwidth at once. However, it is difficult to jam if there is a CW(Continuous Wave) interference signal in the band. Recently, instead of wide-band signal processing, a structure using a filter bank that divides the entire band into several sub-bands and processes each sub-band independently has been proposed. Although it is possible to handle interference signal through the filter bank structure, spurious signal occurs when the signal is received at a boundary frequency between sub-bands. Spurious signal makes a output power of jamming signal distributed, resulting in lower JSR(Jamming to Signal Ratio) and less jamming effect. This paper proposes an over-sampled channelized DRFM structure that enables interference response and prevents spurious signal for sub-band boundary frequency input.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.409-416
• /
• 2007

In cellular orthogonal frequency division multiplexing (OFDM) networks, co-channel interference (CCI) leads to severe degradation in the BER performance. To solve this problem, maximum-likelihood estimation (MLE) CCI cancellation scheme has been proposed in the literature. MLE CCI cancellation scheme generates weighted replicas of the transmitted signals where weights represent the estimated channel transfer functions. The replica with the smallest Euclidean distance from the received signal is selected and data are detected. When the received power of the desired and interference signals are nearly the same, the BER performance is degraded. In this paper, we propose a closed-loop power control (PC) scheme capable of detecting the equal received power situation at the mobile station (MS) receiver by using the newly introduced parameter power ratio (PR). When this situation is detected, the MS sends a feedback to the desired base station (BS) which boosts the transmission power in the next frame. At cell edge where signal to interferer ratio (SIR) is considered to have average value between -5 dB and 10 dB, computer simulations show that the proposed CCI cancellation scheme has a gain of 7 dB at 28 Km/h.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.771-781
• /
• 2017

For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self-interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self-interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.7
• /
• pp.1-8
• /
• 2000

In this paper, we introduce a modified interference cancellation scheme for multiuser detection in CDMA(Code Division Multiple Access). This detector uses SIC(Successive Interference Canceller) scheme and divides the received signals to reduce the delay time. In this proposed structure, the active users are divided into a number of groups. Within each group, parallel detection is performed to estimate the output signal of that group. The estimated output signal due to that group is then subtracted from the received signal and the resulting residual signal is used for the parallel detection of the next group. This parallel and serial cancellation process is repeated until the last group in the stage is completed. The estimated output signals due to all groups except -th group are MAI for the user signals in -th group. Therefore, the estimated output signals due to all groups except th group are subtracted from the received signal, and then the obtained signal becomes the input signal of -th SIC. The proposed RDSIC (Reduced Delay time of Successive Interference Canceller) has performance and complexity close to the SIC, but with much less detection delay.

• Journal of Internet Computing and Services
• /
• v.2 no.3
• /
• pp.27-36
• /
• 2001

Recently much attention has been paid for interference mitigation technique for the COMA system, since more capacity is available with same bandwidth. In this paper, we introduces a novel adaptive interference suppression techniques for the CDMA system with narrow band interference. The proposed interference rejection scheme employs the adaptive linear prediction techniques in the subband. In each subband, we can more easily find and cancel the narrow band signal as compared to the full band. Thus, the proposed interference rejection can be classified as another time-frequency techniques for the narrow band interference rejection(10). Computer simulation is conducted for the 3-G COMA system with IF band sampling techniques, yielding better interference rejection and bit error rate performance as compared to conventional one. Also, optimum filter is analyzed and from the analysis, it can be shown the subband prediction techniques can suppress narrow band interference more efficiently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.938-946
• /
• 2012

Interference alignment (IA) is a data transmission technique that achieves the maximum degrees-of-freedom (DoF) in the multiuser interference channel for high signal-to-noise ratios (SNRs). However, most prior works on IA are based on the unrealistic assumption that perfect and global channel-state information (CSI) is available at all transmitters and receivers. In this paper, we propose the efficient design of feedback framework for IA that substantially suppresses the feedback overhead. While the feedback overhead in the conventional IA quadratically increases with K, the proposed feedback scheme supports the sequential exchange of computed IA precoders between transmitters and receivers and reduces the feedback overhead that linearly scales with K. Moreover, we analyze the residual interference due to the quantization error in limited feedback and propose the ordered IA algorithm that selects IA pair to minimize the sum residual interference in given channel realizations.