• 한국해양공학회지
• /
• 제25권2호
• /
• pp.1-6
• /
• 2011

Vibration-based Structural Health Monitoring (SHM) systems use field measurements of operational signals, which are distorted by noise from many sources. Reducing this noise allows a more accurate assessment of the original "clean" signal and improves analysis results. The implementation of a noise reduction methodology for the Modal Distribution Method (MDM) is reported here. The spectral subtraction method is a popular broadband noise reduction technique used in speech signal processing. Its basic principle is to subtract the magnitude of the noise from the total noisy signal in the frequency domain. The underlying assumption of the method is that noise is additive and uncorrelated with the signal. In speech signal processing, noise can be measured when there is no signal. In the MDM, however, the magnitude of the noise profile can be estimated only from the magnitude of the Power Spectral Density (PSD) at higher frequencies than the frequency range of the true signal associated with structural vibrations under the additional assumption of white noise. The implementation of the spectral subtraction method to MDM may decrease the energy of the individual mode. In this work, a modification of the spectral subtraction method is introduced that enables the conservation of the energies of individual modes. The main difference is that any (negative) bars with a height below zero after subtraction are set to the absolute value of their height. Both noise reduction methods are implemented in the MDM, and an application example is presented that demonstrates its effectiveness when used with a signal corrupted by noise.

• 전기학회논문지P
• /
• 제62권4호
• /
• pp.192-197
• /
• 2013

Road traffic noise barriers being used to reduce the noise, but the city surroundings inhibition, ecosystem disturbance, and it is difficult to maintain. Can enhance or complement the existing noise barrier performance, so that it is necessary to develop an electronic noise-reduction system In this paper, we proposed an electronic road noise reduction devices to reduce road noise for a DSP-based signal processing and analog signal input-output controller. In order to verify the control performance, we performed noise reduction experimentation of ANC by filtered-X LMS algorithm and traffic noise signal injection. The controller is equipped with noise reduction algorithms were tested on the characteristics of directional and omnidirectional speaker.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.41-47
• /
• 2013

PURPOSES : The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS : In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.

• 대한전자공학회논문지SP
• /
• 제42권3호
• /
• pp.121-128
• /
• 2005

음성신호를 대상으로 하는 연구 분야에서 신경회로망은 주로 음성인식 등의 카테고리 분류의 목적으로 사용되며 신호처리의 응용에도 유망하다. 따라서 본 논문에서는 신경회로망에 시간구조를 취한 시간지연 신경회로망을 이용하여 잡음이 중첩된 음성신호의 공간으로부터 잡음이 없는 음성신호의 공간으로 사상을 실행함으로써 잡음을 제거하는 것을 목적으로 한다. 본 논문은 푸리에 변환의 진폭성분을 복원하는 잡음제거의 알고리즘을 사용하여 백색잡음 및 유색잡음에 대해서 본 수법의 유효성을 확인한다.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.103-109
• /
• 2014

본 논문은 비선형 통신 채널에서 발생되는 부호간 간섭을 줄일 수 있는 MMA (Multiple Modulus Algorithm) 적응 등화 알고리즘에서 constellation reduction 개념을 적용하여 등화 성능을 개선하는 CR-MMA (Constellation Reduction-MMA) 에 관한 것이다. MMA 적응 등화기의 탭 계수 갱신시에는 등화기 출력를 이용하여 오차 신호를 얻게 되는데, 이때 송신 신호의 order가 높아질수록 오차 성분이 크게 되어 성능이 저하된다. 그러나 constellation reduction을 이용하면, 고차의 QAM 신호도 4-QAM 신호 성상도로 reduction시켜 오차 신호를 얻으므로 이의 크기가 감소되어 개선된 성능으로 등화가 가능하게 된다. 제안하는 CR-MMA 알고리즘의 성능을 기존의 MMA 알고리즘과 비교하기 위하여 동일한 채널과 잡음 환경하에서 컴퓨터 시뮬레이션을 수행하였으며, 이를 위해 수신측에서의 등화기 출력 신호인 복원된 신호 성상도, 수렴 성능을 나타내는 잔류 isi, MD learning 곡선과 잡음에 대한 강인성을 확인하기 위하여 SER을 사용하였다. 시뮬레이션 결과 모든 성능 지수에서 CR-MMA가 MMA 보다 우월하였으며, SER 성능에서 잡음에 대한 roburstness가 매우 강함을 확인하였다.

• 대한전자공학회논문지
• /
• 제12권3호
• /
• pp.30-36
• /
• 1975

TDM 회선을증가하기 위한 두가지 방식-주기적 sample skipping방법과 표본화주파수 축소 방법-에 대한 불특성을 해석비교하였다. 신호는 통계적으로 stationary인 random신호로 가정했으며, 선로의 잡음과 각랑 상호 간의 간섭효과는 고려하지 않았다. 음성신호에 대한 구체적 비교 결과, 주기회 sample skipping방법이 실제적 설계조건에서 훌륭한 선택이 될 수 있음을 보였다. Distortions are analyzed and compared for two TDM channel expansion methods- periodic sample skipping and sampling frequency reduction. Signal is assumed to be stationary random signal with zero·mean. Channel noise and interference are not considered in the analysis. For speech signal, it is shown that the periodic sample skipping method could be a better choice under practical design constraints.

• 전기의세계
• /
• 제22권4호
• /
• pp.25-29
• /
• 1973

The computation of transmittances between arbitrary input and output nodes is of particular interest in the signal flow graph theory imput. The signal flow matrix [T] can be defined by [X]=-[T][X] where [X] and [Y] are input nose and output node matrices, respectively. In this paper, the followings are discussed; 1) Reduction of nodes by reforming the signal flow matrix., 2) Solution of input-output relationships by means of Gauss-Jordan reduction method, 3) Extension of the above method to the matrix signal flow graph.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2247-2252
• /
• 2009

Since the dimensions of MEMS gyroscope are very small compared to those of conventional gyroscope, MEMS gyroscope should be able to measure charge of pico-coulomb caused by very small change of electrodes gap. However, feed-through signal from driving electrodes to the sensing electrodes due to the electromagnetic coupling is much greater than the sensing signal, which degrades the sensitivity of MEMS gyroscope. This paper introduces the feed-through noise canceling technique using dummy port and confirms the feasibility of feed-through noise canceling experimentally. Experimental results shows that, when driving signal is 6 Vpp, 30 kHz, feed-through signal of vacuum packaged Si Gyroscope decreases from -53.2 dBm to -77.1 dBm by using feed-through reduction technique. Q-factor that could not be measured without noise reduction is measured to be about 2500 and resonance frequency to be 7.018 kHz.

• Journal of Information Processing Systems
• /
• 제15권4호
• /
• pp.748-764
• /
• 2019

In order to deal with the filtering delay problem of least mean square adaptive filter noise reduction algorithm and music noise problem of spectral subtraction algorithm during the speech signal processing, we combine these two algorithms and propose one novel noise reduction method, showing a strong performance on par or even better than state of the art methods. We first use the least mean square algorithm to reduce the average intensity of noise, and then add spectral subtraction algorithm to reduce remaining noise again. Experiments prove that using the spectral subtraction again after the least mean square adaptive filter algorithm overcomes shortcomings which come from the former two algorithms. Also the novel method increases the signal-to-noise ratio of original speech data and improves the final noise reduction performance.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.201-204
• /
• 2011

For efficient noise reduction in a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrum, a new algorithm was proposed. The suggested algorithm reduces white and electrical noise, and it improves signal-to-noise ratio. This algorithm has been optimized to reduce the noise more efficiently using the traces of signal level. The algorithm has been efficiently combined with derivative window to improve the resolution as well S/N. Time domain data was corrected for DC voltage interference. $t^n$ window was applied in time domain data to improved the resolution. However, $t^n$ window can improve the signal resolution, it will also increase the noise level in frequency domain. Therefore, newly developed noise reduction algorithm will be applied to make a balance between resolving power and S/N ratio for magnitude mode. The trace algorithm can determine the current data point with several data points (mean, past data, calculated past data). In the current calculations, we assumed data points with S/N ratio more than 3 were considered as signal data points. After the windowing and noise reduction, both resolution and signal-to-noise ratio were improved. This algorithm is applicable more efficiently to frequency dependent noise and large size data.