• Journal of Positioning, Navigation, and Timing
• /
• 제7권1호
• /
• pp.1-14
• /
• 2018

The Global Positioning System (GPS) provides more accurate positioning estimation performance by processing L1 and L2 signals simultaneously through dual frequency signal processing technology at the L-band rather than using only L1 signal. However, if anti-spoofing (AS) mode is run at the GPS, the precision (P) code in L2 signal is encrypted to Y code (or P(Y) code). Thus, dual frequency signal processing can be done only when the effect of P(Y) code is eliminated through the L2 signal processing technology. To do this, a codeless technique or semi-codeless technique that can acquire phase measurement information of L2 signal without information about W code should be employed. In this regard, this paper implements L2 signal processing technology where two typical codeless techniques and four typical semi-codeless techniques of previous studies are applied and compares their performances to discuss the optimal technique selection according to implementation environments and constraints.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.425-428
• /
• 2001

In this paper, FMCW radar signal processing technique for the vehicle detection system are studied. And FMCW radar sensor is used as a equipment for vehicle detection. To test the performance of developed algorithm, the evaluation of the algorithm is done by simulation for signal processing technique of vehicle detection system. RADAR signal of a driving vehicle is generated by using the Matlab. Distance and velocity of vehicles are calculated with developed a1gorithm. Also the signal processing procedure is done for the virtual data with FM-AM converted noise.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.439-445
• /
• 2005

The stud bolt is one of crucial parts for safe operation of reactor vessels in nuclear power plants, Crack initiation and propagation were reported in stud bolts that arc used for closure of reactor vessel and head, Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure which could induce radioactive leakage from nuclear reactor, In conventional ultrasonic testing for inspection of stud bolts, cracks are detected by using shadow effect It takes too much time to inspect stud bolts by using conventional ultrasonic technique. In addition, there were numerous spurious signals reflected from every oblique surfaces of thread, In this study, the signal processing technique for enhancing conventional ultrasonic technique was introduced for inspecting stud bolts. The signal processing technique provides removing spurious signal reflected from every oblique surfaces of thread and enhances detectability of defects. Detectability for small crack was enhanced by using this signal processing in ultrasonic inspection of stud bolts in Nuclear Power Plants.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권6호
• /
• pp.372-381
• /
• 2014

This study examined a radar signal active cancelation technique, which is a theoretical way of achieving stealth by employing a baseband process that involves sampling the incoming hostile radar signal, analyzing its characteristics, and generating countermeasure signals to cancel out the linear-FM signal of the hostile radar signal reflected from the airborne target. To successfully perform an active cancelation, the effects of errors in the countermeasure signal were first analyzed. To generate the countermeasure signal that requires very fast and accurate processing, the down-sampling technique with the suboptimal maximum likelihood estimation (sMLE) scheme was proposed to improve the speed of the estimation process while preserving the estimation accuracy. The simulation results showed that the proposed down-sampling technique using a 2048 FFT size yields substantial power reduction despite its small FFT size and exhibits similar performance to the sMLE scheme using the 32768 FFT size.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.117-120
• /
• 2001

Synthetic aperture radar (SAR) is a promising active remote sensing technique to obtain large terrain information of the earth in all-weather conditions. SAR is useful in many applications, including terrain mapping and geographic information system (GIS), which use SAR display images. Usually, these applications need the enormous data storage because they deal with wide terrain images with high resolution. So, compression technique is a useful approach to deal with SAR display images with limited storage. Because there is some indispensable data loss through the conversion of a complex SAR image to a display image, some applications, which need high-resolution images, cannot tolerate more data loss during compression. Therefore, lossless compression is appropriate to these applications. In this paper, we propose a novel lossless compression technique for a SAR display image using one-step predictor and block arithmetic coding.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.13-20
• /
• 1999

The vibration signals of driving parts of electric train are distorted its signal patterns due to the impact components, which occurs when wheel passes rail joints. An elimination method of the impact components is investigated using adaptive signal processing technique in this study The result shows that adaptive interference canceling method seems to be more effective than line enhancement technique. The application of adaptive interference canceling method to the signal measured at bogie shows that the extractions of the signals of driving parts of traction motor, reduction gear, and axle bearing are successful. Therefore, only the signals of bogie, which is the place to attach an accelerometer easily, is sufficient for the fault diagnosis and the safety evaluation of electric train. Also, adaptive interference canceling method can be applicable to evaluate the performance of vibration isolation between bogie and car body and to investigate the characteristics of indoor sound.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.117-120
• /
• 2000

Pulse oximetry is a well established non-invasive optical technique for monitoring the SpO$_2$ during anaesthesia, recovery and intensive care. Pulse oximeters determine the oxygen saturation level of blood by measuring the light absorption of arterial blood. The sensors consists of red and infrared light sources and photodetectors. In the measurement of the hemoglobin oxygen saturation, conventional method has required the technique of filtering of remove the noise, and of complex signal processing algorithm. So much time have required to signal processing. In this research, we separate AC signal and DC signal in the stage of signal detection. We filter the noise from each signal and convert A/D. We obtain the SpO$_2$ using the DSP algorithm.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1878-1888
• /
• 1990

In this paper, the input-output interconnection method of the multi-valued signal processing circuit using perfect Shuffle technique and Kronecker product is discussed. Using this method, the design method of circuit of the multi-valued Reed-Muller expansions(MRME) to be used the multi-valued signal processing on finite field GF(p**m) is presented. The proposed input-output interconnection method is shown that the matrix transform is efficient and that the module structure is easy. The circuit design of MRME on FG(p**m) is realized following as` 1) contructing the baisc gates on GF(3) by CMOS T gate, 2) designing the basic cells to be implemented the transform and inverse transform matrix of MRME using these basic gates, 3) interconnecting these cells by the input-output interconnecting method of the multivalued signal processing circuits. Also, the circuit design of the multi-valued signal processing function on GF(3\ulcorner similar to Winograd algorithm of 3x3 array of DFT (discrete fourier transform) is realized by interconnection of Perfect Shuffle technique and Kronecker product. The presented multi-valued signal processing circuits that are simple and regular for wire routing and posses the properties of concurrency and modularity are suitable for VLSI.

• 센서학회지
• /
• 제19권3호
• /
• pp.230-237
• /
• 2010

In sensor signal conditioning and processing, offset and drift characteristics of an operational amplifier are an important factor when the amplifier is used for a precise sensor signal amplifier. In order to use it in high accuracy, an expensive trimming or a complex compensation circuit is required. This paper presents the improved sensor signal conditioning and processing device for ubiquitous sensor network(USN) application or general purpose by developing a hardware of the circuit for reducing the offset voltage and drift characteristics, and a software for its control and sensor signal processing. We realize better offset voltage and drift characteristics of the signal conditioning circuit using low cost operational amplifiers. The experimental results show that this technique is effective in improving the performance of the sensor signal processing device.