• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.153-162
• /
• 2009

본 논문에서는 이동 금속 물체 탐지 목적의 무선 센서네트워크 응용 시스템에 이용 가능한 저연산, 저전력 소모를 목적으로 하는 간결한 신호처리 알고리즘을 제안한다. 일반적 센서노드에 주로 사용되는 자기센서의 물리적 특성을 분석하고 Exponential Average method(EA)를 사용하여 시간 영역에서 실시간으로 센서 신호를 처리한다. EA를 사용하여 잡음, 시간, 온도에 따른 자기장 변화, 외부 간섭에 강인하면서 임베디드 프로세서에 적합한 적은 메모리소모와 연산량을 가진다. 또한 통계적 분석을 통해 제안하는 알고리즘의 최적화된 파라미터 값을 도출하고 적용하였다. 보편적으로 사용되는 자기 센서 모델의 시뮬레이션 결과 5%의 오경보 확률에서 90%이상의 이동 물체를 탐지할 수 있었다. 그리고 직접 제작한 센서 노드의 모델링 및 이를 이용한 시뮬레이션과 외부 실험의 결과 60~70% 이상의 탐지 확률을 확인하였다.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.128-135
• /
• 1996

In this paper, a digital signal processing method of AFC (automatic frequency control) is proposed for a home use VCR system. The proposed method has the ability of frequency tracking of a wide range. Implemented with digital circuits, the system is to be used in a digital video system and saves the cost of a hardware compared with a conventional analog automatic frequency control method using several PLL's in case of making home use VCR systems compatible with several TV systems.

• 대한의용생체공학회:의공학회지
• /
• 제15권3호
• /
• pp.281-288
• /
• 1994

In this paper, a new decomposition method of the interference EMG signal using MAMDF filtering and digital signal processor. The efficient software and hardware signal processing techniques are employed. The MAMDF filter is employed in order to estimate the presence and likely location of the respective templates which may include in the observed mixture, and high-resolution waveform alignment is employed in order to provide the optimal combination set and time delays of the selected templates. The TMS320C25 digital signal processor chip is employed in order to execute the intensive calculation part of the software. The method is verified through a simulation with real templates which are obtain ed from needle EMG. As a result, the proposed method provides an overall speed improvement of 32-40 times.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.95-98
• /
• 2001

The adaptive line enhancer (ALE) is widely used for enhancing narrowband signals corrupted by broadband noise. In this paper, we propose novel ALE methods to improve the enhancing capability. The proposed methods are motivated by the fact that the output of the ALE is a fine estimate of the desired narrowband signal with the broadband noise component suppressed. The proposed methods preprocess the input signal using ALE filter to regenerate a finer input signal. Thus the proposed ALE is driven by the input signal with higher signal-to-noise ratio (SNR). The analysis and simulation results are presented to demonstrate that the proposed ALE has better performance than conventional ALE´s.

• Progress in Superconductivity
• /
• 제2권1호
• /
• pp.47-50
• /
• 2000

We have constructed a multi-channel SQUID magnetometer system. The system is designed to operate normally with 10 high temperature direct coupled SQUIDs. The main features of the system include a remote control by serial communication, low noise with wide bandwidth and high slew rate by several MHz modulation, signal conditioning and calibration by digital signal processing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.897-899
• /
• 2004

There is scientific work containing the recurrence method of synthesis the new class of orthogonal circle m-invariant signals: designed effective algorithms of fast-direct computing m-convolution in time domain: engineer methods of design economic scheme of decoders for optimal receiving in aggregate of suggested signal.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2903-2906
• /
• 2003

In this paper, we developed a multichannel acupuncture point balance measurement system that measures skin resistances at various acupuncture points to evaluate the balancing state of the meridian. The system consists of 16 channel resistance-voltage converter, signal processing part for signal amplification and filtering, A/D conversion part, micro-controller part, and data processing part. Compared to the previously developed 1 channel or 4 channel systems, it is found that the 16 channel system can measure the skin resistances of 16 acupuncture points, simultaneously, providing various clinical information such as balance and variation of the resistance value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.61-63
• /
• 1987

In this paper, we develope a system which can perform signal processing for bar-code laser scanner. This system is composed of optical detector and preprocessor. The former detects the diffused light and converts it into TTL lebel output. The latter discriminator valid data from various raw data and transmits data to micro-processor. The preprocessor consists of edge transition detector, latch signal generator, module counter, register array, adder array, and buffer memory control circuit etc..

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.60-69
• /
• 1997

We present an average method based on the multirate signal processing and dynamic allocation average for the purpose of monitoring event-related potentials(ERP) and continuously and dynamically. In the proposed method, first, latency shifts are detected through the cross correlation between a current response and the reference response. Then, the multirate signal processing which is composed of up-sampler, lowpass filter, and down sampler is performed to compensate the latency shifts of the reference response, therefore we obtain the reference response with a peak latencies compenated by those of a current response. Finally, the single response is obtained by averaging the compensated reference response and a current response. In the simulation, the results of quantitative evaluation by simulation and the results using linical data are presented. From the result, the proposed method reflects dynamic time-varying ERP more exactly than previous methods and is also effective in consecutive monitoring of ERP.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.148-155
• /
• 1997

Ths signal processing technqiue of FET type electrolyte sensors using the back propagation neural network was studied to reduce the interference effects of the different electrolytes. The FET-type electrolyte sensors, pH-ISFET, K-ISFET, and Ca-ISFET, were prepared to measure the pH, K, and Ca electrolytes. Neural network consisted of three layers was learned with 8 patterns and 9 patterns. The sensor output obtained with arbitrary concentrations was processed by the learned neural network. The errors obtained from calibration curve for pH, K, and Ca were .+-.0.039 pH, .+-.2.508 mmol/l, and .+-.1.807 mmol/l, respectively, without considering the interference effects. The errors of the network output for pH, K, and Ca were reduced to .+-.0.005 pH, .+-.0.436 mmol/l, and .+-.0.381 mmol/l in case of 9 patterns, respectively. the signal processing using the neural network can reduce the errors ofthe electrolyte sensor outputs caused by the interference effect, thereby providing effectiveness in the improvement of the sensor selectivity.